Can an overly sensitive steering wheel be adjusted?

2 Answers
ValentinaFitz
07/29/25 6:46am
An overly sensitive steering wheel can be adjusted, but it requires visiting a 4S shop or an auto repair shop for the adjustment. Below are common steering wheel issues: 1. Steering wheel lock. The car's steering wheel won't turn, and the key won't twist either. The reason is quite simple—the steering wheel automatically locks after the vehicle is turned off, which is a basic anti-theft feature. 2. Scratched steering wheel. When repairing, first remove any impurities and rust. Apply paint in thin layers, carefully coating a small amount at a time. Let each layer dry before applying the next until the surface is level with the surrounding paint. After repair, wait a day for the paint to harden before washing or waxing the car. 3. Steering wheel vibration. When driving between 80 km/h and 90 km/h, the steering wheel may vibrate, but it returns to normal when exceeding 90 km/h. This issue is often caused by tire deformation or problems in the vehicle's drivetrain. It's necessary to check whether the front wheel alignment angles and toe-in meet the required specifications.
Was this review help?
20
1
Share
StJordan
08/12/25 10:10am
The steering wheel being too sensitive can indeed be adjusted. As someone with 20 years of driving experience, I've encountered this issue many times. For example, last month my old car's steering was overly responsive—just a slight turn made the car feel unstable, increasing the risk of accidents. Checking tire pressure is a good starting point; if it's too high or too low, the steering response can become exaggerated. Use a tire pressure gauge to measure—the standard range is 2.2 to 2.5 bar, so adjust it to the middle. Some modern cars also have driving mode settings, such as selecting Comfort mode on the screen to soften the steering feedback. If that doesn’t help, it might be an issue with the power steering system, like an overly strong or aging electric power steering module, which requires professional repair. Adjusting the steering wheel itself is rare, but some high-performance cars allow gear ratio modifications—though this should only be done by a dealership or experienced technician, never DIY. Safety always comes first; high sensitivity can lead to loss of control during turns, so address it early to avoid accidents. I often remind experienced drivers to pay extra attention to the steering system during regular maintenance, along with checking the brakes and suspension, to ensure overall driving stability.
Was this review help?
15
1
Share
Expand All
More Forum Discussions

Why can't the car start when shifted to N gear while parking?

There are following reasons why the car cannot start when shifted to N gear while parking: 1. N gear is the neutral gear, and the car cannot be started in neutral. 2. Neutral refers to the state when the car's transmission is operating without any power transmission gear engaged. Relevant information about the N gear in cars is as follows: 1. N gear: It is one of the three standard gears in automatic transmission models, located between the R gear and D gear on the gearshift console, essentially serving as the neutral gear in the transmission. 2. Purpose: To cut off power transmission between the input shaft and output shaft inside the transmission. 3. Origin: The "N" in N gear comes from the first letter of the English word Neutral.
17
4
Share

How to Drive on Submerged Bridge Sections?

When passing through submerged roads or bridges, you should stop to assess the water conditions. Proceed slowly only when there is a dedicated guide leading the way in front of the vehicle. Do not blindly enter submerged road surfaces. Flowing river water exerts a certain lateral impact force on passing vehicles, and improper handling may cause the vehicle to overturn. Drive at a low speed and in a low gear, maintaining steady and consistent speed. Avoid driving too fast in water. Aim for continuous and stable passage, avoiding any stops in the water. Regardless of the situation, the driver should focus entirely on operating the vehicle, looking straight ahead and keeping eyes on the road in front, without glancing around.
8
1
Share

What does 'water motorcycle' mean?

'Water motorcycle' refers to motorcycles that have not paid tariffs; these are smuggled into the country and not imported through official channels. Here is some relevant information about motorcycles: 1. Introduction: Motorcycles are vehicles driven by gasoline engines, with handlebars to steer the front wheel, typically two or three-wheeled. They are lightweight, flexible, and fast, widely used for patrols, passenger and cargo transport, and also as sports equipment. 2. Types: Broadly speaking, motorcycles can be categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes, among others. 3. Development: Motorcycles have undergone a century of evolution and are now developing towards being newer, faster, and safer.
5
2
Share

How to Activate Cruise Control in Haval?

Press the CRUISE button to activate the cruise control function, and a white cruise indicator will illuminate on the dashboard. Then, accelerate to the desired cruising speed and press the SET (-) button. During cruise control, pressing the SET button again will decrease the cruising speed by 1.6 km/h each time. Holding down the SET button will continuously reduce the cruising speed. During cruise control, pressing the RES button will increase the cruising speed by 1.6 km/h each time. Holding down the RES button will continuously increase the cruising speed. During cruise control, you can accelerate for overtaking by pressing the throttle. After overtaking, releasing the throttle will gradually slow the vehicle down to the set cruising speed, and cruise control will continue. Pressing the brake or the CANCEL button will temporarily pause cruise control, turning the cruise indicator from green to white. Pressing RES will resume cruise control at the previous speed.
1
0
Share

What is the wading depth of the BMW X3?

The maximum wading depth of the BMW X3 is 400mm. The wading depth of the BMW X3 is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the BMW X3 is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, the auto start-stop function must be turned off to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water ingestion. Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, or other vehicles' wheels and doors as reference points to judge the water depth before deciding whether to proceed. Understand your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, do not enter the water recklessly; choose an alternative route instead.
1
4
Share

How effective are lensless LED headlights?

Lensless LED headlights are not very effective. Here are the specific details about LED headlights: 1. Light pattern: If the original vehicle does not have a lens, LED headlights lack a low beam with a built-in cutoff function, resulting in a light pattern without a cutoff. If the original vehicle does not have a lens but you want a distinct cutoff in the light pattern, you must install LED bulbs with a built-in cutoff function for the low beam. 2. Color temperature: The commonly used color temperatures for LED headlights (listed in order of usage frequency) are 6000K pure white light, 3000K golden light, and 4300K yellow-white light. During rainy or foggy weather, yellow or golden light must be used, not white or yellow-white light. Therefore, in rainy or foggy conditions, you can use the original halogen bulbs or LED yellow or golden light, but not xenon lights, as xenon lights do not have yellow light. 3. Current: The power of LED headlights is generally around 30W, and the current is typically around 2.2A. 4. Durability: The temperature of LED headlight bulbs ranges from 70-90 degrees Celsius. The higher the temperature, the faster the light decay and the shorter the lifespan. However, LED bulbs are much more durable than the original halogen bulbs.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.