Can an electronic pump be installed in addition to a manual fuel pump?

1 Answers
SanCayden
07/29/25 1:26pm
Theoretically, an electronic pump can be installed in addition to a manual fuel pump. Manual fuel pump: A manual fuel pump is a device that pumps fuel from the fuel tank into the fuel line. When there is air in the fuel line of a diesel engine, such as in a newly manufactured vehicle or when the fuel in the tank is completely exhausted, the engine cannot start because the diesel fuel pump only operates when the engine is running. In such cases, a manual fuel pump is used to pump fuel from the tank into the fuel line. Electronic pump: An electronic pump uses piezoelectric materials as the power device, achieving complete electronic control from operation to drive. It fully controls liquid transmission through an electronic integrated system, thereby achieving adjustability and precision in liquid transmission, making it a new type of pump.
Was this review help?
19
2
Share
More Forum Discussions

Where to Insert the Memory Card for the Mercedes-Benz GLB Dash Cam?

Mercedes-Benz GLB dash cam memory card slot is usually located on the side of the device. The exact position may vary depending on the product model and type. For rearview mirror dash cams, the memory card slot is typically on the top of the device, while for hidden or compact dash cams, it is usually on either side of the device. Below is some related information about dash cams: 1. A dash cam is a device that records images, sounds, and other relevant information during vehicle operation. After installation, it can record the entire driving process in video and audio, providing evidence in case of traffic accidents. 2. Different dash cam products have varying appearances, but they generally consist of the following basic components: Host unit: includes a microprocessor, data storage, real-time clock, display, lens module, operation keys, printer, data communication interface, etc. If the host unit does not include a display or printer, it should have corresponding data display and print output interfaces.
1
3
Share

What to Do If Your Driver's License Has Expired for One Year?

If your motor vehicle driver's license has not been renewed for more than one year after its expiration date, it will be revoked. Below are the specific details regarding a motor vehicle driver's license that has exceeded its expiration period: 1. Renewal within one year of expiration: According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," if the renewal or medical examination deadline is exceeded by less than one year, the driver's license will be in an overdue but renewable state. The driver can bring their ID card, expired driver's license, and a medical condition certificate issued by a county-level or military medical institution at or above the regiment level to the vehicle management office to complete the renewal procedures without taking any subject exams. 2. Renewal after one year but less than three years of expiration: The driver must take the subject one exam at the vehicle management office. Upon passing the exam, they can proceed with the normal renewal procedures.
15
1
Share

Is it normal for the gear lever of Audi A6L to make noise when stepping on the brake?

Audi A6L's gear lever making noise when stepping on the brake is a normal phenomenon. Reasons for the noise: This sound is from the gear shift brake unlocking solenoid valve. When the car is new, the solenoid valve is lubricated during installation, so the sound is minimal. However, after some use, as the lubricant evaporates, hardens, and lubrication deteriorates, the sound becomes louder. This is normal and does not require attention. Long-term use of transmission oil: Prolonged use of transmission oil can lead to the formation of sludge, increasing the wear of friction plates and other components. Wear in these parts can cause malfunctions and result in noise. If the sound during gear shifting is minor and comes from near the gear lever, it is normal and originates from the gear shifting mechanism. However, if there is a clicking sound during gear shifting, it is caused by a fault in the transmission gear impact.
12
4
Share

Where is the chassis number of the Transit van?

The chassis number of the Transit van is located on the left side of the front windshield. In Chinese, it is called the Vehicle Identification Number (VIN), which is a unique code assigned by the manufacturer to identify a vehicle. The VIN is a 17-character alphanumeric code, also known as the 17-digit identification code, chassis number, or 17-digit number. Below is some relevant information about the identification code: 1. The combination of characters in the VIN ensures that no two vehicles of the same model will have the same number within 30 years, making it uniquely identifiable, hence it can be referred to as the 'vehicle's ID card'. 2. The chassis number is like a fingerprint; if the steel plate bearing the chassis number is damaged, the owner must not cut it off themselves. They should preserve the damaged state of the vehicle, drive it directly to the vehicle management department for authentication to prove that the steel plate with the chassis number is indeed damaged. Then, the vehicle management department will handle the situation according to the actual circumstances.
19
3
Share

How Long Does Bodywork and Painting Take at a 4S Shop?

If it's a single panel paint job, it usually takes one day. If there are many cars waiting for painting at the 4S shop, it typically requires 2 to 3 days. Here is extended information about automotive paint: 1. It's normal for vehicles to sustain minor scratches during daily use. When scratches occur, the paint surface gets damaged, requiring repair. Automotive paint consists of four layers, from inside out: the electrocoat layer, primer layer, basecoat layer, and clearcoat layer. 2. If it's just minor scratches, only the clearcoat layer is affected. Scratches on the clearcoat can be removed through simple polishing. For deeper scratches that reach the basecoat layer, repainting is the only repair method. If scratches penetrate to the primer layer, exposing the metal surface, prolonged exposure may lead to metal corrosion. For severe scratches reaching the primer layer, immediate repair is recommended to prevent body panel rusting.
3
2
Share

What type of driver's license is required for a 6.2-meter sedan?

6.2-meter sedans require an A1 driver's license. Below is a detailed introduction to various driver's license types: 1. C1 driver's license: Permitted vehicle type is small cars. This is an entry-level license held by the majority of drivers, allowing them to operate vehicles with 9 seats or fewer. 2. B1 driver's license: Permitted vehicle type is medium-sized buses. This is an intermediate technical license, typically used for commercial vehicles such as urban minibuses and rural passenger minibuses. Fewer people hold this license. 3. A3 driver's license: Permitted vehicle type is city buses. This is an advanced professional license specifically for operating commercial vehicles, exclusively for city buses, and it also includes the most basic permitted vehicle types. 4. A2 driver's license: Permitted vehicle type is tractors. This is an advanced top-tier license with a wide range of permitted vehicles. 5. A1 driver's license: Permitted vehicle type is large buses. This is an advanced top-tier license for drivers with first-class driving skills.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.