···
Log in / Register

Can an Electric Vehicle Charger Still Charge If the Exhaust Fan Doesn't Spin?

3 Answers
VonArabella
07/25/25 8:44am
An electric vehicle charger cannot charge if its fan is not spinning. Below are the relevant details: Checking the transistor: First, use a multimeter to measure whether the transistor controlling the fan is damaged. If the transistor is intact, the fan itself might be faulty. You can unplug the fan from the circuit board and connect it to a 12V DC power source (pay attention to the positive and negative poles) to see if it spins. Also, check for any foreign objects blocking it. Poor contact: If the fan starts spinning after wiggling its wires, it indicates a broken wire or poor contact inside the connector. If it still doesn't spin, the fan is definitely broken and needs replacement. For chargers with intelligent cooling systems, besides the above checks, also inspect whether the thermistor has poor contact, is damaged, or has loose solder joints. Note that this thermistor has a negative temperature coefficient, so replacement requires caution.
Was this review help?
10
3
Share
AdrianLynn
08/11/25 1:55pm
I once studied the cooling system of a charger. If the exhaust fan isn't spinning, although charging might still proceed at times, it's highly inadvisable to continue using it. The core function of the fan is heat dissipation. Should it stop, the internal temperature of the charger could skyrocket, potentially burning out circuits or even causing a fire. Common causes include dust clogging the fan, motor failure, or power supply line issues. Testing is straightforward: listen for the fan's operation. If it's not spinning, first power off and check for dust. If it still doesn't spin after cleaning, immediately stop charging and take it to a professional repair shop for inspection. Ignoring this risk not only damages the equipment but also endangers safety and affects the lifespan of the electric vehicle's battery. Regular maintenance and cleaning of the fan can prevent such issues, ensuring safe and efficient charging. In short, for safety's sake, fan issues must be taken seriously.
Was this review help?
10
2
Share
Expand All
CooperFitz
09/27/25 7:05am
As a seasoned driver with years of experience, I pay special attention to safety details. If the cooling fan isn't working, you might still be able to charge, but don't take it lightly—the fan is crucial for heat dissipation. Once it fails, the charger overheating could melt components or cause a short circuit fire. My driving experience tells me the causes are often dust accumulation or fan aging. If not addressed promptly, it poses significant risks. My advice is to stop charging immediately and check if the fan vent is blocked. If there's no improvement, consult a professional mechanic. Road safety is no trivial matter; charging issues like this can affect the entire vehicle's health. Regular fan maintenance can prevent sudden troubles. Remember, prevention is more worry-free than repairs.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

Why Does One Side of the Car Audio Work While the Other Doesn't?

If one side of the car audio works while the other doesn't, it could be due to the audio channel being adjusted to one speaker, a short circuit in the speaker's power line, or a damaged speaker. Below is an introduction to car audio-related knowledge: 1. Components: Car audio mainly consists of three parts—the head unit, speakers, and amplifier. The head unit is the most important component, functioning like the human brain, as it controls the sound output. Popular head units include RADIO-only units (with broadcast reception), RADIO plus MP3 units, CD units, MP3 plus CD changers, CD plus navigation units, and CD/DVD/in-car MP5 units. 2. Function: Car audio (auto audio) is designed to alleviate the boredom of drivers and passengers during travel by providing radio and playback functions.
9
5
Share

How to Shift Gears in Cadillac XT5?

Press the brake pedal and pull the gear lever to the desired position. On the gear lever, you can see that 'D' stands for Drive. If the vehicle needs to be parked for a short time, shift to the 'N' (Neutral) position. To reverse, shift to the 'R' (Reverse) position, and to park, shift to the 'P' (Park) position. Below is an introduction to the Cadillac XT5: 1. As a mid-cycle refresh, the new Cadillac XT5 features minimal exterior changes compared to the current model, with the most notable update being the grille design—replacing the current model's horizontal chrome bars with a mesh pattern. The fog light bezels now include chrome trim, enhancing the sporty visual appeal. Additionally, the front bumper's lower lip features a silver trim, giving the front end a broader and more robust appearance. 2. The interior of the new Cadillac XT5 largely follows the current model's design, with a spacious and luxurious American-style dashboard. Behind the gear lever, multimedia control buttons and knobs have been added. 3. In terms of features, the new model continues to offer an in-car multimedia system supporting Apple CarPlay and Baidu CarLife smartphone connectivity. Higher trim levels are equipped with a 14-speaker BOSE audio system. 4. Under the hood, the new XT5 is powered by the latest 2.0T engine, delivering a maximum power of 177 kW (241 PS) and a peak torque of 350 N•m, paired with a 9-speed automatic transmission. The 2.0T engine features cylinder deactivation technology, allowing it to operate on two cylinders under low-load conditions, significantly improving fuel efficiency.
5
1
Share

Is it cleaner to change engine oil by draining or suction?

Changing engine oil by draining is the cleaner method. The reasons are: The drain plug is located at the lowest point of the oil pan, which allows almost all the engine oil to be drained out. At the same time, you can visually observe the condition and color of the old oil during the draining process, which helps in assessing the engine's working condition. The sediment and impurities at the bottom of the oil pan can also be drained out, and the metal shavings attached to the drain plug can be cleaned in time, avoiding contamination of the new oil. Information about oil change is as follows: 1. Lift the vehicle, remove the underbody guard, and loosen the drain bolt on the oil pan. This is a common method for oil change, but the disadvantage is that the draining time is longer, and there may be some residual old oil left in the oil pan. 2. The suction method uses vacuum gas to create suction. The suction tube of the suction device is inserted into the oil pan through the oil dipstick to extract the oil. This method is faster, and most engines will have very little old oil remaining.
9
5
Share

How to Check if the Thermostat is Damaged?

Here are the methods to check if the thermostat is damaged: 1. To determine whether the car's thermostat is damaged, check when starting the car. After the engine begins working, inspect the coolant tank. If the cold water inside does not show any flow movement, it indicates the thermostat is damaged. 2. After starting the car, touch the upper and lower radiator hoses to feel the temperature. Generally, three minutes after the engine starts, the temperature of the upper and lower hoses should be the same. If they are not, the thermostat is likely damaged. 3. When starting the car, pay attention to the engine's warm-up time. If the engine takes significantly longer to warm up than before and the car's power is noticeably reduced, the thermostat is probably faulty. 4. When the car is cold, start the engine and observe after five minutes. If the coolant temperature does not reach the normal range of 85 to 105 degrees, the thermostat may be malfunctioning. 5. Monitor the temperature gauge. When it reaches 70 degrees, open the radiator's drain valve to test the water temperature. If the water temperature is very low, the thermostat is likely damaged. 6. Additionally, consider the car's mileage when deciding whether to replace the thermostat. Generally, the safe lifespan of a wax-type thermostat is 50,000 km. Beyond this mileage, it should be replaced.
11
2
Share

What to Do When the Car Windows Fog Up in the Rain and Visibility Is Poor?

Here are solutions for foggy car windows: 1. Open the windows for ventilation: Opening the windows can balance the pressure and temperature difference between the inside and outside of the car, naturally eliminating window fog. After opening the windows, wiping them with hands or paper tools makes it less likely for fog to form again; 2. Turn on the car's air conditioning: Using the car's air conditioning can also achieve the effect of balancing the temperature difference. Simply adjust the temperature to be close to the outside temperature; 3. Use anti-fog spray: Anti-fog spray is a surfactant with hydrophilic ends, allowing it to quickly bond with water molecules in the air on the glass surface and rapidly spread into a thin film, preventing the formation of water droplets and thus avoiding fog. The advantage of anti-fog spray is that it can effectively and significantly prevent moisture from appearing during rainy days and in cold autumn and winter weather. Due to its surfactant properties, it can also make the glass surface cleaner.
13
4
Share

How Long Can You Drive When the Engine Oil Warning Light Comes On?

When the engine oil warning light comes on, you should immediately open the engine compartment to check the oil level. If the oil is below the minimum mark, you should not continue driving the vehicle. Turn off the engine immediately and wait for assistance, as continued use may cause engine damage. Below are the specific steps for adding engine oil: 1. If the car's engine oil is insufficient, you can add it yourself. However, it is important to ensure that the oil level remains slightly below the upper mark on the dipstick. First, turn off the engine and open the car's engine hood. 2. Next, locate the oil filler cap and unscrew it. Do not pour the oil directly in at this point. You need to first clean out the old oil from the oil tank. Open the drain plug and collect the old oil in a prepared container. 3. Note that the oil you add should be the same brand as the previous oil, and the opened oil bottle should not be older than one year. Once everything is ready, use a funnel to pour the oil into the oil tank through the filler opening.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.