Can an electric vehicle be charged after being exposed to rain?

What are the components and functions of the cooling system?

Components of the cooling system: The main components include the thermostat, water pump, water pump belt, radiator, cooling fan, water temperature sensor, liquid storage tank, heating device, expansion tank, water jackets in the engine block and cylinder head, and additional devices. The following is an introduction to the functions of the cooling system: 1. Adaptive adjustment: It can change the cooling intensity according to the engine's load, speed, and temperature changes, ensuring rapid engine warm-up and maintaining normal operating temperature. 2. Optimal range: Provides different cooling intensities for different working parts of the engine, dissipating the heat generated during engine operation to the air and ensuring the engine operates within the most suitable temperature range. 3. Proper operation: The cooling system must prevent both engine overheating and excessive cooling in winter. After a cold engine start, the cooling system also ensures rapid warm-up to reach normal operating temperature as quickly as possible.

9

4

Share

What are the reasons for insufficient cooling in car air conditioning?

Car air conditioning not cooling sufficiently can be caused by: 1. Excessive refrigerant leading to reduced cooling efficiency; 2. Insufficient refrigerant causing inadequate cooling; 3. Excessive impurities in refrigerant or compressor oil, causing blockages and insufficient cooling capacity; 4. Moisture infiltration in the air conditioning refrigeration system; 5. Dirty condenser reducing heat dissipation capability. Solutions for insufficient cooling in car air conditioning include: 1. Adding refrigerant; 2. Replacing the air conditioning blend door; 3. Cleaning the air filter and strainer. Functions of car air conditioning: 1. Filtering air entering the cabin; 2. Absorbing moisture from the air; 3. Maintaining clean air to prevent bacterial growth; 4. Preventing window fogging; 5. Regulating cabin temperature.

15

2

Share

What are the consequences of leaving a car running overnight without turning it off?

Leaving a car running overnight without turning it off will increase fuel consumption and carbon deposits, causing certain environmental pollution, so prolonged idling should be avoided as much as possible. If you need to wait for a long time after parking, it is generally recommended to turn off the engine if the wait exceeds 5 minutes. Idling is not a speed but rather an operational state. When the engine runs without load, it is referred to as idling. When the engine is running and the accelerator pedal is completely released, the engine enters an idling state. The effects of prolonged stationary idling on the engine are as follows: 1. Increased carbon deposits: If the engine idles for an extended period, the throttle opening will be very small, and the injector will spray highly concentrated fuel to maintain engine operation. Therefore, idling itself is more likely to cause carbon deposits compared to driving or highway speeds. Prolonged idling will inevitably lead to more severe carbon buildup in the engine. Carbon deposits directly affect the car's power and comfort. 2. Increased fuel consumption: During idling, the car's fuel consumption relatively increases. According to tests, idling for three minutes consumes fuel equivalent to driving one kilometer, and idling for 4 hours can consume almost 4-6 liters of fuel. 3. Shortened engine lifespan: When the engine idles, the temperature and pressure in the cylinders are relatively low, prolonging the preparation time for fuel ignition. Additionally, the cylinder's sealing performance decreases, making it prone to knocking sounds and shortening the engine's lifespan. 4. Damage to the catalytic converter: Prolonged idling causes the engine's air-fuel mixture to become overly rich, reducing oxygen content in the exhaust. The unburned mixture may combust at the catalytic converter's location, potentially burning out the catalytic converter.

6

5

Share

Where is the coolant added in a Mercedes-Benz?

Mercedes-Benz coolant is added at the front of the engine under the hood. The steps for adding coolant are: 1. Unscrew the radiator cap, open the radiator drain valve, and drain the antifreeze; 2. Insert a rubber hose into the radiator filler port and flush the engine cooling system with tap water; 3. After draining the water from the cooling system, close the radiator drain valve; 4. Unscrew the reservoir cap and add antifreeze until the liquid level reaches the MAX mark; 5. Tighten the reservoir cap; 6. Start the engine and let it idle for 2-3 minutes, then unscrew the radiator cap to release air from the cooling system. The antifreeze level will drop, so top it up again to the MAX mark.

7

4

Share

Where is the cigarette lighter fuse located in the Envision?

The cigarette lighter fuse in the Envision is located in the fuse box on the passenger side. Its usage method is: 1. Press the cigarette lighter to automatically heat it; 2. It will automatically pop out after 5 to 8 seconds, and you can take it out for use. Taking the 2021 Envision 2WD Leading Edition as an example, its body dimensions are: length 4694mm, width 1839mm, height 1686mm, with a wheelbase of 2750mm and a fuel tank capacity of 66 liters. The 2021 Envision 2WD Leading Edition features a front McPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169PS, a maximum power of 124kW, and a maximum torque of 250Nm.

16

2

Share

Is the Toyota Highlander the same as the Prado?

Toyota Highlander is not the Prado. The Toyota Highlander is a mid-size SUV under the Toyota brand, while the Prado is a mid-to-large-size SUV under the Toyota brand. Taking the 2020 Highlander as an example, its body dimensions are: length 4890mm, width 1925mm, height 1715mm, with a wheelbase of 2790mm, a fuel tank capacity of 72.5 liters, and a curb weight of 2080kg. The 2020 Highlander features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 220PS, a maximum power of 162kW, and a maximum torque of 350Nm, paired with a 6-speed automatic transmission.

6

2

Share

Can an electric vehicle be charged after being exposed to rain?

What are the components and functions of the cooling system?

What are the reasons for insufficient cooling in car air conditioning?

What are the consequences of leaving a car running overnight without turning it off?

Where is the coolant added in a Mercedes-Benz?

Where is the cigarette lighter fuse located in the Envision?

Is the Toyota Highlander the same as the Prado?

Does the 'off' light indicate a car malfunction?

Is Bridgestone a Domestic or Imported Tire Brand?

What is the size of the Nissan Qashqai's front windshield?

How to Complete Vehicle Ownership Transfer Procedures?