Can an E license be used for scooter motorcycle tests?

3 Answers
DiGeorge
07/29/25 6:10am
An E license can be used for scooter motorcycle tests. For motorcycle tests, candidates must bring their own vehicles, and the size of the stakes is set according to the displacement of the vehicle model. The E license corresponds to the permitted driving model of ordinary two-wheeled motorcycles, and it also allows the driving of light motorcycles permitted by the F license. It can be said that holding an E license basically allows driving all types of two-wheeled motorcycles in China. In China, motorcycle driver's licenses are categorized based on engine displacement and the number of wheels, roughly divided into the following three types: D license: three-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed greater than 50km/h; E license: two-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed greater than 50km/h; F license: motorcycles with an engine displacement less than or equal to 50ml or a maximum design speed less than or equal to 50km/h.
Was this review help?
6
4
Share
LiamRose
08/12/25 9:15pm
When I took the E license test, I used a scooter, and the whole process went smoothly. The E license is specifically for two-wheeled motorcycles, and scooters usually have a displacement of around 125cc, which fully meets the requirements. Before the test, I rented a scooter to practice slalom and acceleration/deceleration because it's easy to handle and beginner-friendly. However, you need to pay attention to the test center's regulations—some places require complete vehicle registration documents, otherwise you might not be allowed to enter. On the actual test day, the examiner asked me to complete the basic skills test on the scooter, and I passed without any issues. For daily city commuting, scooters are very convenient, saving both fuel and parking fees. In short, the E license definitely allows you to take the test on a scooter—the key is to choose the right model and not exceed the displacement limit. It's advisable to consult the driving school or test center rules beforehand to avoid last-minute mistakes. Don’t overlook safety: wear a helmet and check the brakes to prevent accidents.
Was this review help?
3
1
Share
Expand All
OliviaLee
10/04/25 2:18am
As a frequent scooter rider, I can tell you that an E-class license is perfectly suitable for taking the scooter riding test. The E-class license is designed for two-wheeled motorcycles, and scooters fall under this category, requiring only an engine displacement of 50cc or above. During the test, it's common to use a scooter due to its flexible handling, making it easier to pass. I remember when I was preparing for the test last year, I chose a scooter to practice turning and balancing skills, and I aced the test effortlessly. After passing, it became incredibly practical for commuting, especially when navigating through traffic jams. One thing to note is to check the vehicle's condition before the test, such as whether the lights are working and if the tires have enough air, as these could lead to point deductions during the exam. In short, don't worry—pairing an E-class license with a scooter is a reliable choice for the test, just make sure not to violate any rules. Always prioritize traffic regulations and safety when riding.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

How to adjust the clock mode on the XRV dashboard?

Steps for models with a color audio display system: 1. Press the MENU/CLOCK button. 2. Press the (LIST/PUSH/SELECT) button to enter the clock adjustment interface. 3. Rotate the (LIST/PUSH/SELECT) knob left or right to adjust the hour and minute. 4. Finally, select confirm to set the time. Steps for models with a smart screen connectivity system: 1. Select the HOME icon, then choose settings. 2. Select System - Clock - Clock Adjustment. 3. Choose to adjust the hour and minute. 4. Finally, select confirm to set the time.
16
5
Share

Is it harmful if the car chassis is soaked in water?

If a vehicle is submerged in water, it can damage the engine and electrical systems. Generally, if the water level is below the air intake, there is no harm, but if it rises above, damage may occur. Below is an introduction to car wading-related content: 1. Effects: Driving through water may cause the car engine to stall and may also damage the electronic systems in the car. 2. Damage: If the electronic systems are damaged, it will affect the normal operation of the car. Driving through water can also cause rust on the car chassis. If water is sucked into the engine while driving through water, the engine will stall. If the electronic systems are damaged, they need to be replaced immediately; otherwise, it will affect the normal operation of the car.
15
3
Share

Does the Wuling Hongguang Mini have one or two reverse lights?

Wuling Hongguang Mini has one reverse light. Relevant information is as follows: 1. Note: When reversing, always check for pedestrians or electric vehicles behind you. Always reverse slowly to minimize potential hazards in case of accidents. 2. Turning around: When making a U-turn on wider roads, you can directly judge the position of the rear or wheels on the road through the rearview mirror. On narrower roads, if you cannot accurately determine the position of the rear and rear wheels from the rearview mirror, you can open the door and observe the rear wheels while operating. When making a U-turn at intersections or street corners, expand your view and range of the rear, pay attention to the movement of passing vehicles, pedestrians, and bicycles, and reverse carefully.
14
5
Share

Does replacing the oil temperature sensor require removing the transmission?

Replacing the oil temperature sensor does require removing the transmission. The transmission oil temperature sensor is installed on the valve plate inside the transmission oil pan. Its main function is to detect the temperature of the automatic transmission hydraulic oil. When removing the transmission, be careful not to pull hard on the wiring harness on the valve plate. The testing method for the oil temperature sensor is as follows: 1. Measure the resistance value of the oil temperature sensor: Remove the transmission oil temperature sensor, place the sensor in a beaker filled with water, heat the water in the beaker, and measure the resistance between the two terminals of the sensor at different temperatures. 2. Standard resistance value for the sensor: Compare the measured resistance value with the specified value. If the resistance value differs significantly from the specified value, it should be replaced.
8
4
Share

How often should the CVT transmission fluid be changed in the Nissan Qashqai?

Nissan Qashqai CVT transmission fluid generally needs to be replaced every 80,000 to 100,000 kilometers or every 5 to 6 years. Symptoms of deteriorated transmission fluid in the Nissan Qashqai: 1. Slipping: The engine speed increases, and slipping occurs under high-torque conditions such as uphill driving. 2. Oil leakage: Poor sealing of the transmission, possibly due to issues with gaskets or seals. 3. Jerking: The main cause may be deteriorated transmission fluid containing dirt or impurities. 4. Abnormal noises: Excessive debris or impurities in the transmission fluid. 5. Overheating: The dashboard will display a transmission fault warning light. 6. Stalling: The engine stalls when shifting from P to D gear. Possible failures include the solenoid valve, lock-up control valve, or input shaft speed sensor.
4
3
Share

Where to Get a Car Natural Gas Tank Inspection?

Local Special Equipment Inspection and Research Institute (Special Inspection Institute) gas tank inspection stations conduct cylinder inspections. Here are the relevant details: 1. Material Proof: For inspection, you need to bring the gas tank usage registration certificate from the oil-to-gas conversion, the gas tank factory qualification certificate, the gas tank installation supervision inspection certificate, the vehicle's driving license, and the owner's ID card to the Special Inspection Institute for inspection. For details, you can inquire by calling the local Special Inspection Institute. 2. Pressure Equipment: A gas tank is a type of pressure equipment with explosion hazards, and its contained medium is generally flammable, explosive, toxic, highly corrosive, etc. Its usage environment, due to characteristics like mobility, repeated refilling, non-fixed operators, and changing usage conditions, makes it more complex and harsh compared to other pressure vessels.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.