Can an A7 be modified to look exactly like an RS7?

1 Answers
JeremiahLynn
07/29/25 9:37pm
A7 modified to RS7 cannot guarantee exactly the same, only highly similar, but this behavior is illegal. The following is relevant knowledge about vehicle modification: Legal conditions for vehicle modification: Whether vehicle modification is legal depends on whether the vehicle matches the photo on the driving license and whether it complies with the factory technical parameters. If not, it cannot pass the annual inspection. Vehicle modification situations: First, it refers to specialized vehicle modification manufacturers that use nationally certified engines, chassis, or assemblies to redesign and modify vehicles different from the original model. Second, it refers to licensed vehicles that undergo some technical modifications based on the original assembly for specific uses. Modified vehicles are collectively referred to as modified cars. When modifying a licensed vehicle, it is necessary to register and declare to the vehicle management office. The modification technical report must be reviewed and approved by the vehicle management office before modification can proceed. After modification is completed, the modification change procedures must be completed at the vehicle management office.
Was this review help?
19
4
Share
More Forum Discussions

What is the purpose of adding urea to diesel vehicles?

Adding urea is a method for cleaning exhaust in diesel vehicles. All vehicles equipped with diesel engines require urea to clean the exhaust; otherwise, the emissions from diesel vehicles will exceed the standard. Here are the relevant details: 1. Adding urea solution to diesel vehicles can reduce nitrogen oxides in the exhaust, lower emission pollution, and enhance the environmental friendliness of the vehicle. 2. In cars, trucks, buses, and heavy-duty non-road vehicles, urea is primarily used as part of the exhaust treatment system to clean vehicle exhaust, reduce nitrogen oxide emissions in the exhaust, and optimize engine performance and fuel consumption.
6
4
Share

How to reset the maintenance light on the Great Wall H1?

The method to reset the maintenance light on the Great Wall H1: 1. With the engine off, turn on the ignition switch, and use the MENU button and the scroll adjustment wheel to control the dashboard display to show the oil life interface; 2. Press and hold the SETCLR button for a few seconds to reset the oil life to 100%, then turn off the ignition switch to complete the reset. The Great Wall H1 is a compact SUV launched by Great Wall Motors, with body dimensions of 4749mm in length, 1931mm in width, and 1655mm in height, and a wheelbase of 2950mm. The Great Wall H1 features a three-slat front grille design with chrome trim around the grille. The headlight cluster is connected to the front grille, and LED daytime running lights are positioned below the fog lights.
13
4
Share

How to reset the Suzuki Ciaz maintenance light?

Suzuki Ciaz maintenance light reset method: 1. Adjust the dashboard to display the remaining mileage interface; 2. Press the small protruding button on the right side of the dashboard and hold for more than 5 seconds. The OIL indicator will appear in the lower right area of the dashboard; 3. Quickly press the small protruding button on the right side of the dashboard 5 times within 2 seconds; 4. The OIL indicator will flash 3 times, indicating the reset is complete. The Suzuki Ciaz is positioned as an A+ class sedan, with dimensions of 4545mm in length, 1730mm in width, and 1475mm in height, and a wheelbase of 2650mm. The Suzuki Ciaz offers numerous practical configurations, including a 6.5-inch display, automatic air conditioning, rear sunshade, keyless start, cruise control, etc. In terms of safety features, it is equipped with active safety systems such as ABS + EBD + ESP + TCS, combined with six airbags throughout the vehicle.
3
5
Share

How to Use the Hill Start Assist Function in a Car?

Method to use the hill start assist function in a car: When starting the vehicle on a steep or slippery slope, the driver switches from the brake pedal to the accelerator pedal, which may cause the vehicle to roll backward, making it difficult to start. To prevent this situation, the hill start assist control temporarily applies brakes to all four wheels to prevent the vehicle from rolling back. Working principle of the hill start assist system: When the vehicle is on an uphill slope, at the moment the foot leaves the brake pedal and moves to press the accelerator, the HAC system automatically maintains brake oil pressure for 2 to 3 seconds, preventing the vehicle from rolling back due to gravity and inertia. When the accelerator is pressed, the system gradually reduces the braking force. Once the HAC's brake control ends, the vehicle moves forward steadily as the accelerator is pressed. If the accelerator is not pressed, the HAC's automatic brake control will also end after 2 to 3 seconds.
15
4
Share

How to Repair Car Scratches with Toothpaste?

Method for repairing car scratches with toothpaste: Use a soft cloth or sponge to apply toothpaste and gently polish the scratched area. Be careful not to apply excessive force to avoid large-scale polishing that may cause a matte finish and affect visual appearance. Toothpaste has a polishing effect and can repair some minor scratches. However, it is not recommended for car owners to use toothpaste for repairs, as improper handling may result in more severe scratches. If scratches appear on the car's paint surface, it is advisable to visit a car beauty center for polishing. The car's paint surface consists of four layers, from the inside out: the electrophoretic layer, the middle coating layer, the color paint layer, and the clear coat layer. After the car body is assembled, robots immerse the entire body in an electrophoretic pool to form the electrophoretic layer, which serves as an anti-rust barrier. The middle coating layer is the second layer of paint, which also provides anti-rust protection and enhances adhesion to the next paint layer. The third layer is the color paint layer, which displays the various car body colors visible in daily life. The fourth layer is the clear coat layer, which protects the paint and enhances its glossiness.
7
5
Share

How to Replace Car Key Battery?

Car key battery replacement method: 1. Purchase the original battery for the car key, ensuring the voltage and model are the same; 2. Remove the mechanical key, usually by pressing a small button, then pulling it out; 3. Use a small flat-head screwdriver to pry open the car key, there will be a small gap in the middle of the key, gently twist to open; 4. Pry out the old battery, install the new one, and reassemble the car key after installation. Reasons for car key failure: 1. Car key issues: The car key may run out of power during daily use; 2. Car issues: When the car's battery is low on power, the car key may also become unresponsive; 3. Environmental issues: If the car is parked in an area with strong magnetic fields or if thieves are attempting to steal important items from the car, they may use jammers around the parking area, leading to issues with locking or unlocking the car door.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.