Can a Vehicle with a Transplanted High-Displacement Engine Pass Inspection?

1 Answers
DeManuel
07/29/25 11:09am
Transplanting a high-displacement engine will prevent a vehicle from passing inspection. According to Article 25 of the 'Measures for the Registration of Motor Vehicles of the People's Republic of China,' the following circumstances will result in the refusal of transfer registration: the motor vehicle owner arbitrarily modifies or replaces the motor vehicle or its files. Vehicles with unregistered engine replacements will definitely fail the annual inspection. Relevant regulations are as follows: Article 13 stipulates that motor vehicles registered for road use must undergo regular safety technical inspections based on legal and administrative regulations, considering factors such as vehicle purpose, passenger and cargo capacity, and service life. Article 11 states that driving a motor vehicle on the road requires displaying the vehicle license plate, inspection qualification mark, insurance mark, and carrying the vehicle registration certificate. Therefore, vehicles that do not undergo annual inspections are not permitted on the road; if discovered, they will be impounded and the owner fined.
Was this review help?
11
4
Share
More Forum Discussions

Why is the Audi A6 suddenly consuming more fuel?

Audi A6 suddenly consuming more fuel can be due to severe carbon deposits, system malfunctions, maintenance issues, etc. Severe carbon deposits: Frequent use of fuel additives can lead to increased carbon deposits inside the engine. Excessive carbon deposits can roughen the interior of the intake manifold, affecting the air intake volume and the mixture effect. System malfunctions: The ignition system, ignition coils, and spark plugs are common sources of faults. A faulty ignition coil can cause the ignition system to stop working, leading to misfires, reduced power, and increased fuel consumption. Maintenance issues: Too much or too little engine oil, poor quality oil, excessively high viscosity, or not changing the oil on time are all key factors affecting fuel consumption. When using engine oil, it is essential to choose a high-quality product with the correct viscosity rating for the vehicle.
3
0
Share

What is the tire pressure for the 2020 BMW X1 run-flat tires?

The front tire pressure should be between 2.0--2.3, and the rear tire pressure should be between 2.2--2.5. Run-flat tires: "The standard tire pressure is 240kpa-250kpa, while the reinforced tire pressure is 280kpa-290kpa. The tire pressure differs between cold and hot tires, with hot tires having about 20kpa higher pressure than cold tires. The manufacturer's recommended value refers to the cold tire pressure, which is around 230kpa-250kpa when the car is cold. However, the specific tire pressure should be based on the value marked on each vehicle. Pressure adjustment method: According to the principle of thermal expansion and contraction, in summer, the pressure can be adjusted 0.1-0.2 lower than the normal value, and in winter, it can be adjusted 0.1-0.2 higher than the normal value. The normal value here must refer to the car's manual. A reasonable pressure is 70%-80% of the maximum pressure marked on the tire, but the pressure should preferably not exceed the maximum pressure marked on the tire.
14
5
Share

Why does the timing chain of Audi A4 jump teeth again after replacement?

Audi A4's timing chain jumps teeth again after replacement because the tensioner is broken, which affects the engine timing and causes the teeth to jump. The function of the timing belt: The timing belt is crucial for the normal operation of the engine. Once the timing belt is damaged, the valves and ignition will stop working, and in severe cases, the cylinder head may also be damaged. As the engine operating time increases, the timing belt and its accessories, such as the timing belt tensioner pulley, timing belt tensioner, and water pump, will wear out or age. Therefore, each time the belt is replaced, these accessories should be carefully checked to ensure they are in good condition. Precautions for using the timing belt: During use, regularly inspect the condition of the timing belt. If cracks are seen on the surface of the timing belt, pay attention to whether the belt is aging. If there is abnormal noise while driving, check whether the timing belt is installed correctly.
19
5
Share

Is it mandatory to buy insurance when purchasing a car?

It is mandatory to purchase compulsory traffic insurance when buying a car, while ordinary commercial insurance can be freely chosen. If compulsory traffic insurance is not purchased, once caught by traffic police, the consequences include: 1) vehicle impoundment, 2) requirement to back-pay the compulsory insurance, and 3) a penalty of twice the compulsory insurance premium. Compulsory traffic insurance, short for Compulsory Motor Vehicle Traffic Accident Liability Insurance, is a mandatory insurance required by the state for every vehicle owner. It is a compulsory liability insurance where the insurance company compensates for personal injuries, deaths, and property losses (excluding the vehicle's occupants and the insured) caused by road traffic accidents involving the insured vehicle, within the liability limits. It is a type of liability insurance with a coverage period of one year. Automobile commercial insurance is essentially commercial motor vehicle insurance. Commercial motor vehicle insurance is voluntarily purchased by the vehicle owner from commercial insurance companies, in addition to the state-mandated compulsory traffic insurance. Common types of automobile commercial insurance include vehicle damage insurance, third-party liability insurance, theft insurance, and passenger liability insurance. Process for purchasing insurance: Prepare documents: For individual vehicle insurance, the driver should bring their ID card, driver's license, vehicle registration certificate, letter of introduction, and other relevant documents for the insured vehicle. For vehicles engaged in individual business operations, additional documents such as business license and transport permit should be brought to the insurance company. Fill out the policy after vehicle inspection: The insurance company will conduct a vehicle inspection at a designated inspection site. The review is to confirm whether the vehicle meets the insurance company's underwriting conditions. If approved, the policy can be filled out. The vehicle owner should verify the policy details to ensure accuracy before selecting the insurance types. Pay the premium after confirmation: After confirming the policy and selecting the insurance types, the premium can be paid. Upon payment, the policyholder and the insurer can sign the insurance certificate, after which the insurance company will issue a receipt.
8
4
Share

What is the normal tire pressure for BYD F3?

According to the provisions and requirements of the international GBT2978-2008 standard, the tire pressure for BYD F3 is generally between 2.0~2.5 BAR. Tire pressure monitoring is the real-time automatic monitoring of tire pressure during vehicle operation, with alarms for tire leaks and low pressure to ensure driving safety. There are three commonly used tire pressure monitoring methods: Direct tire pressure monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the tire pressure data. The system automatically alerts when tire pressure is too low or there is a leak. Indirect tire pressure monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to become smaller, resulting in a faster rotation speed compared to other wheels. By comparing the differences in rotation speeds between tires, the system monitors tire pressure. Indirect tire pressure monitoring systems essentially rely on calculating the rolling radius of tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): It combines the advantages of the above two systems, equipping direct sensors in two diagonally opposite tires and an indirect system for all four wheels. Compared to using only direct systems, this hybrid system can reduce costs and overcome the limitation of indirect systems, which cannot detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time data of actual pressure in all four tires like direct systems.
20
3
Share

What is the material of the Cayenne body?

The material of the Cayenne body is lightweight steel. Advantages: Fashionable and dynamic appearance; High-end and luxurious; Spacious interior; Fine interior craftsmanship with rich configurations; Good handling performance; High safety coefficient. Exterior: The Porsche Cayenne has a fashionable and dynamic exterior, with complete and smooth overall lines and a strong sporty vibe. Netizens describe it as "tall and majestic in appearance, with a very imposing front face." Interior: The interior craftsmanship of the Porsche Cayenne is relatively fine; The configurations are quite comprehensive; The seats are comfortable; The steering wheel's automatic heating and the armrest design next to the seats are more user-friendly; Optional configurations such as the panoramic sunroof and compass cater to some consumers' pursuit of individuality. Space: The interior space of the Porsche Cayenne is relatively spacious; The storage compartments are abundant and practical; The trunk space is slightly smaller compared to other models in the same class. Handling: The Porsche Cayenne has clear gear positions and smooth shifting; Some netizens have commented that "the steering wheel lacks road feel, but the steering is precise, the suspension is on the stiffer side, and the body roll is minimal during high-speed cornering."
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.