Can a thumbtack puncture a tire?

What is the yield strength of Q235 steel?

Q235 has a yield strength of 235MPa. Q235 ordinary carbon structural steel is also called A3 plate. Ordinary carbon structural steel - ordinary plate is a type of steel material. The Q represents the yield limit of this material, and the following 235 refers to the yield value of this material, which is around 235MPa. The yield value decreases as the thickness of the material increases (plate thickness/diameter ≤16mm, yield strength is 235MPa). Below are the usage introductions: 1. Widely used in construction and engineering structures: used to make steel bars or construct factory building frames, high-voltage transmission towers, bridges, vehicles, boilers, containers, ships, etc. It is also widely used as mechanical parts with relatively low performance requirements. C and D grade steel can also be used for certain professional steel applications. 2. Used for various mold handles and other non-critical mold parts.

19

4

Share

Is the deduction in Subject 2 for each item or overall?

The deduction in Subject 2 is for each item. Here are the relevant details: 1. Examination standard: Each item is scored out of 100, and a score of 80 or above is required to pass. Passing all five items with scores above 80 means passing Subject 2. The full score for Subject 2 is 100. For large buses, tractors, city buses, medium buses, and large trucks as the permitted vehicle types, a score of 90 or above is required to pass. For other permitted vehicle types, a score of 80 or above is required. 2. Examination items: The test includes parallel parking, stopping and starting on a slope, right-angle turns, S-curve driving, and reversing into a garage. The full score is 100, and the passing standard is 80. Each Subject 2 examination has two attempts. The evaluation criteria include items marked as fail, deducting 20 points, deducting 10 points, and deducting 5 points.

18

3

Share

Is there a warning if the fuel tank cap is not tightened properly?

The fuel tank cap does not have a warning if it is not tightened properly, so extra caution is required. The malfunction indicator light will not illuminate due to an improperly tightened fuel tank cap; it only lights up in case of internal engine faults. When the car engine is not functioning correctly and the self-diagnostic system does not output any fault codes, it is particularly necessary to rely on the operator's inspection and judgment to determine the nature and location of the fault. An unclosed fuel tank cap can lead to the following potential dangers: 1. Fire hazard: If the fuel tank cap is left open, any external sparks falling into the tank could easily cause a fire. 2. Engine water ingress: Forgetting to close the fuel tank cap during rain or snow can allow water to enter the tank, leading to engine water damage. 3. Attracting fuel thieves: This is a common occurrence, where car owners forget to close the fuel tank cap after refueling and wake up to find half of their fuel stolen after parking overnight in residential areas.

20

2

Share

What are the reasons for the Sorento's high fuel consumption?

Abnormal fuel consumption can be caused by aging spark plugs, carbon buildup in the throttle, or insufficient tire pressure. 1. Reasons: In most cases, it is due to the owner overfilling the fuel tank, causing excess gasoline that is not burned in the form of vapor. Normally, each vehicle is equipped with an activated charcoal canister on the right side of the engine compartment, which is specifically designed to absorb fuel vapors. When starting the engine, the activated charcoal canister absorbs some of the fuel vapors, but excess gasoline cannot evaporate through the activated charcoal canister and may flow out through the air pipe. 2. Reducing fuel consumption: Apart from road conditions, driving habits also play a role in reducing fuel consumption. Avoid prolonged idling to warm up the car, avoid sudden acceleration, avoid unnecessary lane changes and overtaking, make good driving judgments, and avoid sudden braking.

6

2

Share

Why is the dashboard off light always on?

The off light in the vehicle's dashboard is the anti-skid deactivation warning light. When this light is on, it serves to remind the driver that the vehicle's anti-skid system has been turned off. At this point, the driver can continue to drive cautiously or pull over as soon as possible to reactivate the vehicle's anti-skid function. Below is relevant information: 1. Definition of the vehicle anti-skid system: The vehicle anti-skid system uses an ABS/ASR electronic control unit to determine the wheel slip rate and vehicle speed based on signals from the wheel speed sensors. The electronic control unit adjusts the throttle opening and brake pressure to regulate the wheel slip rate, preventing the vehicle from skidding during driving. 2. Situations for using the anti-skid system: The vehicle's anti-skid system is enabled by default. The system primarily analyzes information from sensors to ensure optimal dynamic balance during driving. In rainy or snowy conditions, the anti-skid system may be temporarily turned off, as the vehicle is prone to skidding on snow-covered or heavily waterlogged roads. In such cases, the vehicle's computer will automatically detect wheel slippage and limit engine power output to a necessary extent.

14

3

Share

Can I replace my driver's license photo during the Subject 3 test?

You can replace your driver's license photo during the Subject 3 test. The photo for the driver's license is stored in the file, and you need to find the place where the file is submitted to replace it. If it is not convenient to replace it, you can also reapply for a replacement after obtaining the driver's license. However, you cannot change the photo yourself, otherwise the driver's license will be considered a fake. Here is some additional information: 1. Method for replacing a lost driver's license: According to Article 54 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" (Order No. 123 of the Ministry of Public Security), if a motor vehicle driver's license is lost, the motor vehicle driver shall apply for a replacement to the vehicle management office of the place where the driver's license was issued. When applying, you should fill out an application form and submit relevant certificates and vouchers. 2. Fill out the relevant application form: Citizens who need to replace a lost driver's license should bring relevant certificates to the vehicle management office and fill out the "Motor Vehicle Driver's License Application Form" and the "Motor Vehicle Driver's License Replacement Application Form". After paying the relevant fees for the replacement, you can receive a new version of the driver's license.

7

5

Share

Can a thumbtack puncture a tire?

What is the yield strength of Q235 steel?

Is the deduction in Subject 2 for each item or overall?

Is there a warning if the fuel tank cap is not tightened properly?

What are the reasons for the Sorento's high fuel consumption?

Why is the dashboard off light always on?

Can I replace my driver's license photo during the Subject 3 test?

Is the Peugeot 508L Suspension a Magic Carpet?

Does Subaru Have Station Wagons in China?

Where is the outdoor temperature sensor of the Sagitar located?

Why is the lock button of Haval H6 not responding?