Can a Temporary License Plate for a Sedan Be Used Across Provinces?

2 Answers
VonCora
07/24/25 1:38am
Can a Temporary License Plate for a Sedan Be Used Across Provinces? Yes, a temporary license plate for a sedan can be used across provinces, but you need to apply for a temporary license plate that allows cross-administrative jurisdiction. Temporary license plates can be categorized into: 1. Temporary license plates for use within administrative jurisdictions; 2. Temporary license plates for cross-administrative jurisdictions; 3. Temporary license plates for testing purposes; 4. Temporary license plates for special-type motor vehicles. A temporary license plate is a paper motor vehicle license plate that permits temporary road use of a motor vehicle, also known as a temporary moving license plate. Conditions for applying for a temporary license plate: 1. Driving the vehicle back to the place of use from the place of purchase; 2. Vehicle transfer, with official license plates already surrendered; 3. A new vehicle that has not obtained official license plates in the local area and needs to be driven to another location for modifications; 4. A vehicle purchased locally that needs to be driven to another location; 5. A vehicle that has not yet been registered and requires temporary trial use.
Was this review help?
9
0
Share
McMary
08/10/25 9:19pm
When I first bought my new car, I was also very curious about whether temporary license plates could be used out of province. After checking information and consulting the DMV, I learned that it depends on the type of temporary plate: one is a local temporary plate, which can only be used within the province where the vehicle is registered and cannot be used out of province; the other is an inter-provincial temporary plate, which allows nationwide travel. When I bought my car and planned to travel to a neighboring province, I specifically applied for the inter-provincial version, and everything went smoothly without any trouble. However, I heard that someone mistakenly used a local temporary plate out of province, got stopped by traffic police, fined a few hundred yuan, and even had points deducted—quite a loss. Temporary plates have a short validity period, usually 15-30 days. It's advisable to confirm the type before traveling out of province, such as checking the annotations on the plate or consulting the dealer. Remember not to exceed the validity period, otherwise, the risk of being checked on the road increases, and safe driving is always more important.
Was this review help?
8
2
Share
Expand All
More Forum Discussions

What is the difference between polishing wax and scratch wax?

The differences between polishing wax and scratch wax are: 1. Different compositions: Polishing wax is a synthetic wax, which is relatively hard and thick; Scratch wax contains Teflon, making it very slippery and thin. 2. Different usage methods: Polishing wax is used with a polishing machine to remove body scratches; Scratch wax is a type of car wax designed to repair minor scratches on the paint surface. 3. Different functions: Polishing wax can grind away the aged paint film on the surface; Scratch wax can quickly remove fine scratches on the car paint. Methods for car paint maintenance are as follows: 1. Waxing: Prevents oxidation, isolates static electricity, enhances the brightness of the car paint surface, and isolates the paint from dust and harmful gases; 2. Crystal coating: Applies a high-molecular film with hardness and smoothness to the car surface, which solidifies to protect the paint; 3. Glazing: Penetrates into the car paint to form a mesh protective film, enhancing the strength of the paint.
8
3
Share

Are Motorcycles Fuel-Consuming?

Motorcycle enthusiasts often notice during daily use that motorcycles of the same displacement can exhibit different fuel consumption performances. This is mainly related to the following factors. 1. Engine: The motorcycle engine determines the vehicle's performance, and the engine technology directly affects the fuel consumption performance. Therefore, the motorcycle's fuel consumption is primarily related to the engine technology. 2. Fuel supply system: In theory, fuel-injected models are certainly more fuel-efficient than carburetor models. Although there may be differences in actual use, these differences are still caused by the technology of the fuel injection system. Hence, the technology of the fuel supply system directly determines the vehicle's fuel consumption performance. 3. Vehicle weight: The lighter the motorcycle's own weight, the lower the corresponding fuel consumption performance. This is mainly because when the vehicle's load is reduced, the driving resistance decreases. 4. Tire specifications: The vehicle's tire specifications are also directly related to the fuel consumption performance. The main reason here is the direct relationship with the vehicle's driving resistance, as wider tires result in greater driving resistance, and vice versa.
15
1
Share

How to Quickly Start an Automatic Transmission Car?

Automatic transmission quick start method: 1. Insert the key after getting in the car, turn it to the second power-on position for ignition, and wait for the system self-check to complete; 2. Shift the gear lever from P to N; 3. Release the brake and start the car's engine; 4. Press the brake pedal with your foot, shift the gear lever from N to D, release the brake and press the accelerator to start. Introduction to automatic transmission gears: 1. P is the parking gear, used for long-term parking; 2. R is the reverse gear, engaged when the vehicle needs to move backward; 3. N is the neutral gear, used when the vehicle is parked for a short time without turning off the engine; 4. D is the drive gear, when the gear lever is in D, the vehicle will automatically shift gears based on throttle opening and speed data; 5. S is the sport mode, making the vehicle drive more sporty; 6. M is the manual mode, when the gear lever is in M, shifting is done manually by the driver; 7. L is the low gear.
7
1
Share

What Are the Causes of Engine Shaking and Check Engine Light Illumination?

Engine shaking and the illumination of the check engine light can be caused by: 1. Poor combustion of the air-fuel mixture in the engine; 2. Malfunctions in the spark plugs, high-voltage wires, or ignition coils; 3. Abnormal fuel supply pressure and faults in the intake pressure sensor. The function of the engine is to convert the thermal energy of gasoline or diesel into mechanical energy by burning the fuel in a sealed cylinder, causing the gas to expand and push the pistons to perform work. The main components of an engine include: 1. The valve train; 2. The crankshaft and connecting rod assembly; 3. The ignition system; 4. The cooling system; 5. The lubrication system; 6. The starting system; 7. The fuel supply system. Methods for engine maintenance include: 1. Using qualified engine oil; 2. Using qualified coolant and antifreeze; 3. Regularly cleaning the radiator scale; 4. Regularly removing engine carbon deposits; 5. Regularly replacing the three filters (air, oil, and fuel); 6. Maintaining a reasonable engine speed.
11
4
Share

What are the causes of white smoke from the exhaust pipe?

The causes of white smoke from the exhaust pipe are: 1. Stains on the air filter; 2. Malfunction of the carburetor; 3. Contamination of the oxygen sensor in the exhaust pipe. The exhaust pipe includes the front exhaust pipe and the rear exhaust pipe, and its functions are: 1. Shock absorption and noise reduction; 2. Easy installation; 3. Extending the life of the exhaust muffler system. The maintenance methods for the exhaust pipe are: 1. Waterproofing: When driving in the rain or going to the car wash, pay attention to preventing water from entering the muffler and causing rust, which will affect the use of the exhaust pipe; 2. Rust prevention: Remove the muffler, block the drain hole, add rust-proof oil evenly into the cylinder, and install the muffler; 3. Cleaning: The exhaust pipe is often exposed to the outside and is the same as the inside of the car. Dirt inside can affect normal use, so pay attention to the cleanliness of the exhaust pipe.
8
1
Share

What is the reason for the brake light warning when the handbrake is released?

The reasons for the brake light warning when the handbrake is released are: 1. The brake switch is damaged; 2. The brake pads are worn or aged; 3. There is insufficient brake fluid. The function of the handbrake is to provide braking when parking on flat or sloping surfaces, preventing the vehicle from moving automatically when unattended and avoiding traffic accidents. The correct method for applying the handbrake is: 1. Press the handbrake button before pulling it; 2. Apply gentle force when pulling the handbrake; 3. Pull the handbrake up to about 70%, as pulling it all the way to the top will shorten the lifespan of the handbrake cable. The dangers of forgetting to engage the handbrake while driving include: 1. The brake pump cannot provide sufficient braking force, causing the engine to stall; 2. Accelerated wear of the brake discs and hardening of the brake pads due to friction heat; 3. Stretching of the handbrake cable; 4. Leakage of brake cylinder oil, leading to brake failure.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.