Can a Temporary ID Card Be Used for the Written Driving Test (Subject 1)?

1 Answers
DelKai
07/30/25 1:19am
A temporary ID card can be used for the test. The admission ticket and other documents are handled by the driving school, which will distribute them during the test. Electronic ID cards are not accepted for the test. If you don't have an ID card, you can apply for a temporary one, which holds the same validity as a regular ID card. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," you can take the Subject 1 test twice on the same day. If you fail the first attempt, you can retake it for free. If you fail the second attempt, the Subject 1 test ends, and you can only reschedule after ten days. The Subject 1 test consists of 100 questions, including single-choice and true/false questions, each worth 1 point, totaling 100 points. If you answer 11 questions incorrectly, the system will automatically submit the test and end the session. The Subject 1 test is computer-based and lasts 45 minutes. The content of the Subject 1 test includes: regulations on driving licenses and motor vehicle management; road traffic conditions and rules; traffic safety violations and penalties; regulations on road traffic accident handling; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Notes for the Subject 1 test: Candidates should dress appropriately—no slippers are allowed. Electronic devices and bags are prohibited in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the instructions and procedures on the large screen, and store personal belongings in lockers before entering the examination room. At the identity verification station, you will be assigned a seat. Once seated, begin the test, ensuring the camera is aligned with you and adhering to test discipline. If you fail the first attempt, you can retake it the same day. If you fail again, you must pay to reschedule. After the test, queue to collect your score report and sign it. Failure to sign renders the result invalid. There is no limit to the number of times you can reschedule the Subject 1 test. Each subject can be taken once, with one retake allowed if you fail. If you skip the retake or fail it, the test ends, and you must reschedule. For Subject 2 and Subject 3, you only have five attempts. Subject 2 and Subject 3 tests can be rescheduled after ten days. If you fail the Subject 3 safe driving knowledge test, your previously passed road driving skills test results remain valid. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 covers laws, regulations, and knowledge related to road traffic safety. Subject 2 is the field driving skills test. Subject 3 includes two parts: road driving skills and safe driving knowledge. The safe driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4, though the official regulations (Ministry of Public Security Order No. 123) do not use this term.
Was this review help?
1
3
Share
More Forum Discussions

Can I Pass the Annual Inspection with Xenon Headlights?

As long as the modified xenon headlights are equipped with bi-xenon projectors and do not have light scattering issues that could affect the safety of oncoming drivers, they can pass the annual inspection. Essential requirements for xenon headlights: 1. Projector Lens: The luminous intensity of xenon headlights ranges between 4000K~6000K, far exceeding regulatory standards. Therefore, xenon headlights must be equipped with a projector lens to reduce intensity for safe use. Otherwise, the brightness of xenon headlights would be like staring directly at the sun, posing a significant threat to other drivers and pedestrians. 2. Headlight Cleaning System: Xenon headlights have relatively poor light penetration. If dust or dirt adheres to the headlights, it can cause light refraction and scattering, affecting other drivers and pedestrians. Additionally, xenon headlights have weaker penetration, and dust can impair their illumination effectiveness. Therefore, vehicles equipped with xenon headlights must have a headlight cleaning system.
8
5
Share

How to Remove Yellow Stains on White Car Paint?

The causes and removal methods of yellow stains on white car paint are: 1. Dust and impurities: When driving in areas with heavy dust, dust and impurities can accumulate on the white paint surface. Some impurities are stubborn and cannot be removed with regular cleaning, such as asphalt and bird droppings. These substances have strong adhesion and require specialized cleaning agents for soaking, stain removal, and rinsing to completely eliminate them. 2. Paint aging: If the car paint is exposed to prolonged sunlight and rain without timely care, it can easily age and develop spots on the surface. Some cars parked for extended periods or exposed to acid rain may even suffer severe corrosion. In such cases, polishing wax should be used to grind and polish the affected paint surface.
16
3
Share

Which Model is the Entry-Level Mercedes-Benz?

Currently, the most entry-level model among domestically produced Mercedes-Benz vehicles is the Mercedes-Benz C-180K Classic. It is equipped with a 1.6L supercharged engine, delivering a maximum power of 115 kW and a maximum torque of 230 Nm, with a 0-100 km/h acceleration time of 9.1 seconds. Relevant information about the turbocharger is as follows: 1. Introduction: A turbocharger is essentially an air compressor that increases the intake air volume by compressing air. 2. Working Principle: It utilizes the inertial force of the exhaust gas discharged by the engine to drive the turbine in the turbine chamber. The turbine then drives the coaxial impeller, which compresses the air delivered through the air filter pipeline, pressurizing it into the cylinder. As the engine speed increases, the exhaust gas discharge speed and turbine speed also increase synchronously, allowing the impeller to compress more air into the cylinder. The increased air pressure and density enable the combustion of more fuel, thereby increasing the fuel quantity and adjusting the engine speed, which in turn enhances the engine's output power.
9
1
Share

Is 'off' on or off? Is 'on' on or off?

on means on, off means off. Here is relevant knowledge about car switches: 1. Usage of light switches: Most light switches are located on the left combination switch. Up is the right turn signal, down is the left turn signal. Forward is high beam, backward switches between high and low beams. Rotating the head of the combination switch forward once turns on parking lights, and further forward turns on headlights. 2. Usage of high and low beams: Low beam switch is used for normal night driving in urban areas or under street lights; High beam switch is prohibited for night driving in cities. The flashing switch (alternating between low and high beams) serves as a warning function - if the other vehicle doesn't dim lights, or when passing intersections at night, usually lift the light control lever upward.
7
3
Share

What does car exhaust resonance feel like?

Car exhaust resonance feels like the vehicle's floor is vibrating, accompanied by some buzzing sounds. Exhaust resonance can significantly affect the comfort of the vehicle. Most factory-installed exhaust systems do not exhibit resonance; this phenomenon is usually found in aftermarket or modified exhaust systems. Modifying the exhaust header can enhance performance, especially for turbocharged engines, where the performance improvement is quite noticeable. The exhaust header contains a component called the catalytic converter, which reduces the levels of pollutants in the exhaust gases. Other causes of exhaust resonance include vibrations generated by the engine. Typically, bellows are installed in the front and middle sections of the exhaust system. With proper design, these can effectively reduce most of the exhaust vibrations, but some residual vibrations may still remain inside the vehicle.
12
4
Share

What is the purpose of alternating between high and low beams?

Alternating between high and low beams is used for nighttime encounters with oncoming vehicles, overtaking, etc. The purpose of switching between high and low beams is to serve as a warning. Below are additional details: 1. High beams: Should be turned on in conditions of poor visibility, such as on highways or rural roads. 2. Low beams: Should be used when visibility is good, as well as when encountering oncoming vehicles, following another vehicle, encountering pedestrians, or non-motorized vehicles. 3. Alternating beams: When overtaking large trucks, because they have large blind spots and high chassis, it is necessary to repeatedly flash the lights to alert the truck driver and ensure safety before overtaking.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.