···
Log in / Register

Can a Temporary ID Card Be Used for the Subject 2 Driving Test?

4 Answers
MichaelRose
07/29/25 6:13am
Temporary ID cards can be used for the Subject 2 driving test. A temporary ID card holds the same legal validity as a formal resident ID card, thus allowing candidates to take the Subject 2 test with it. According to Article 19, Clause 1 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," "First-time applicants for a motor vehicle driving license shall fill out an application form and submit their identity proof." Here, the identity proof can be either a formal ID card or a temporary ID card, both of which carry the same legal validity. Below is relevant information regarding temporary ID cards: 1. It is important to note that a temporary ID card is valid for 3 months, and an expired temporary ID cannot be used to enter the examination venue. Therefore, candidates should promptly apply for a replacement formal or temporary ID card. 2. Temporary ID cards cannot be swiped magnetically. If the test requires magnetic swiping, candidates should inform the examination staff in advance. The staff will then arrange the test accordingly, often scheduling candidates with temporary ID cards to take the test last in many locations. 3. Typically, replacing a formal ID card takes about 1 month, so the 3-month validity period of a temporary ID card is more than sufficient. Temporary ID cards are issued at the household registration office of the local public security bureau, usually requiring a small fee of around ten yuan, and can often be obtained on the same day, with a maximum waiting period of 3 days.
Was this review help?
20
5
Share
Megan
08/12/25 9:24pm
As someone with long-term exposure to the driving test process, I know that a temporary ID can be used for the Subject 2 test because it is legally valid as an identification document and is recognized by the DMV just like a permanent ID. However, in practice, some test centers may have special requirements, such as needing the original document to be within its validity period or avoiding damage. It's advisable to contact the local driving school or DMV a few days in advance to confirm specific regulations to avoid a wasted trip on the test day. Additionally, the Subject 2 test is very strict, and identity verification is the first hurdle—don’t get distracted by bringing irrelevant items. During practice, simulate the test environment more often to improve your skills, which is more crucial. If there’s an issue with the temporary ID, it’s not worth the wasted time and effort. Overall, it can be used, but thorough preparation is essential.
Was this review help?
2
5
Share
Expand All
VincentAnn
10/04/25 2:29am
A friend of mine used a temporary ID for his driving test (Subject 2) without any issues—the test center accepted it directly. However, he made sure to call and confirm a day in advance to avoid complications. Temporary IDs have a short validity, usually expiring within a month. If your test date is close to the expiry, it’s safer to switch to a permanent one. During Subject 2, after identity verification, the focus shifts to skill tests like reverse parking and S-curves—practice these thoroughly instead of fixating on document issues. The driving test is strict overall, but with compliant documents, you can proceed confidently. Bringing supplementary proof, such as registration receipts, can also help. Just ensure all document details match to prevent delays.
Was this review help?
15
4
Share
Expand All
SanZoey
11/17/25 4:05am
From the perspective of the driving test system, a temporary ID card is fully applicable for the Subject 2 test, with no technical obstacles in the process. The DMV equipment can read the barcode on temporary IDs without issues, as long as the name, photo, and registration records match. However, ensure the document is not expired or illegible; bring the original on the test day. The focus of Subject 2 is operational skills, with identity verification being just a prerequisite—don’t stress over it. It’s advisable to check your document status a week before the test and resolve any issues early. During practice, prioritize vehicle control and don’t let minor details affect your performance.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

How to Break in an Automatic Transmission Car?

Automatic transmission car break-in methods are: 1. For the initial break-in period of 1 to 500 kilometers, the speed should not be too fast, generally below 70 to 80 kilometers per hour, with the engine speed not exceeding 2200 rpm; 2. For the mid-term break-in period of 500 to 1000 kilometers, the maximum speed can be appropriately increased, generally reaching 90 to 100 kilometers per hour, with the engine speed still below 2500 rpm; 3. For the final break-in period of 1000 to 1500 kilometers, the speed can be increased to below 120 kilometers per hour. Since break-in is a gradual process, it must be done step by step, with the engine speed not exceeding 3000 rpm. Appropriate speed increases will not affect the engine but can actually promote the break-in process.
2
2
Share

What Causes the Car Steering Wheel to Lean to the Left?

The reasons for a car steering wheel leaning to the left include excessive wear on the left front tire, damage to the ball joint shock absorber, or inconsistent tire pressure between the two sides of the vehicle. Below are the adjustment methods for a left-leaning steering wheel and the hazards of car deviation: Adjustment methods for a left-leaning steering wheel: Turn the vehicle's steering wheel fully to the right to expose the rear of the left front wheel; loosen the fastening nut with a wrench and rotate the left tie rod clockwise; then turn the steering wheel fully to the left to expose the rear of the right front wheel; loosen the fastening nut and rotate the right tie rod counterclockwise. Hazards of car deviation: Minor deviation can cause tire wear or even render the tire unusable, while severe cases may lead to dangerous situations such as tire blowouts or loss of vehicle control.
20
5
Share

Does the Song Plus DM-i come with a charging station?

The Song Plus DM-i 51km version does not come with a charging station, but the 110km version does. There may be regional differences, and whether it is included depends on the local 4S dealership. If a charging station is provided, you will need to install it yourself, provided you have your own parking space and approval from the property management of your residential area. The Song Plus DM-i comes with a 16A 3.3KW home charging station, while the actual charging power of the Song Plus DM-i ranges between 2.6kw and 3.2kw, with an average of 3kw. Therefore, the charging time using this station is: for the Song Plus DM-i 51km version, from 0 to full charge, 8.3kwh ÷ 3kw = 2.7 hours; for the Song Plus DM-i 110km version, the battery capacity is 18kwh, so the time from 0 to full charge is 18kwh ÷ 3kw = 6 hours. In addition to using the home charging station, the Song Plus DM-i can also be charged using the 10A plug 1.5KW portable charger provided by the manufacturer, which can be plugged directly into a standard household socket. However, the charging speed is relatively slow, with an actual charging power of about 1.5KW, meaning it charges 1.5kWh per hour. The charging time using the portable charger is: for the BYD Song Plus DM-i 51km version, from 0 to full charge, 8.3kwh ÷ 1.5kw = 5.5 hours; for the 110km version, from 0 to full charge, 18.3kwh ÷ 1.5kw = 12.2 hours.
19
2
Share

Where is the cabin air filter located in the new Nissan Sylphy?

The cabin air filter in the new Nissan Sylphy is located inside the glove compartment on the passenger side. The replacement steps are as follows: 1. Open the glove compartment cover; 2. Locate the fixing buckle on the right side of the glove compartment and pull it outward firmly; 3. Remove the fixing buckle of the glove compartment cover to detach it; 4. Squeeze both sides of the glove compartment towards the center with both hands, and the glove compartment can then be removed; 5. After removing the glove compartment, you will see the cabin air filter cover. Press firmly on the fixing buckles on both sides of the cover to remove it; 6. Pull the old cabin air filter outward; 7. Install the new cabin air filter and reassemble everything in the reverse order of disassembly. The new Nissan Sylphy has body dimensions of 4631 mm in length, 1760 mm in width, and 1503 mm in height, with a wheelbase of 2700 mm.
16
4
Share

Why Can't the Car Door Be Opened from the Outside but Can Be Opened from the Inside?

There are several reasons why a car door cannot be opened from the outside but can be opened from the inside, including issues with the door cable or faults in the locking mechanism itself. Problems with the door cable: The door panel needs to be removed for inspection, as the cable may have become detached. Faults in the locking mechanism: The door panel must be removed to inspect and identify the specific issue with the locking mechanism. Door quality: The quality of a car door is primarily reflected in its anti-collision performance, sealing performance, and ease of opening and closing. Anti-collision performance is particularly important because, in the event of a side impact, the buffer distance is very short, making it easy for passengers inside the vehicle to be injured.
20
4
Share

What is New Energy Water?

New energy fuel is currently the alcohol-based fuel used in hotels. Introduction to New Energy: New Energy (NE): Also known as non-conventional energy. It refers to various forms of energy other than traditional energy sources. These are energies that are just beginning to be developed and utilized or are being actively researched and awaiting promotion, such as solar energy, geothermal energy, wind energy, ocean energy, biomass energy, and nuclear fusion energy. Definition of New Energy: New energy generally refers to renewable energy sources developed and utilized based on new technologies, including solar energy, biomass energy, wind energy, geothermal energy, wave energy, ocean current energy, tidal energy, and the thermal cycle between the ocean surface and deep layers.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.