Can a temporary ID be used for the driving test (Subject 3)?

2 Answers
StIsaac
07/24/25 10:49am
A temporary ID can be used for the Subject 3 driving test. A temporary ID holds the same legal validity as a permanent ID and can be used as a formal ID within its 3-month validity period. Therefore, there is no issue with using a temporary ID for the Subject 3 test. Subject 3, which includes the road driving skills test and the safety and civilized driving knowledge test, is part of the motor vehicle driver's license examination. It is commonly referred to as the road driving skills and safety and civilized driving knowledge test. The full score is 100, with a passing score of 90. A retake is allowed immediately if failed, and if the retake is unsuccessful, a new appointment can be made after 10 days. Subject 3 road driving skills test includes: vehicle preparation, light simulation test, starting, driving straight, gear shifting, lane changing, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. Subject 3 test precautions: Starting: Close the door, fasten the seatbelt, turn on the left signal, shift to 2nd gear, honk three times, check the left rearview mirror, slowly release the clutch while accelerating and releasing the parking brake to start, avoiding rolling back. Going straight through intersections: Speed should not exceed 30 or drop below 20, and crossing the yellow line is prohibited. Bus stops: Speed should not exceed 30 or drop below 20, and crossing the yellow line is prohibited. Turning right at intersections: Turn on the left signal 3 seconds in advance, speed should not exceed 30 or drop below 20, and crossing the line is prohibited. Changing lanes: Turn on the left signal 3 seconds in advance, speed should not exceed 30 or drop below 20, and crossing the lane line is prohibited. Overtaking: Turn on the left signal 3 seconds in advance, speed should not exceed 30 or drop below 20, and crossing the lane line is prohibited. Turning left at intersections: Turn on the left signal 3 seconds in advance, speed should not exceed 30 or drop below 20, and crossing the line is prohibited. Passing school zones: Speed should not exceed 30 or drop below 20, crossing the line is prohibited, and honking is prohibited. Driving straight: Shift to 5th gear when speed exceeds 40, speed should remain above 40, and crossing the line is prohibited. Accelerating: Shift to 5th gear when speed exceeds 40, speed should remain above 40, and crossing the line is prohibited. Making U-turns: Choose an appropriate section, turn on the right signal to move to the far-right lane, stop, turn on the left signal, shift to 2nd gear, perform a two-forward-one-reverse U-turn, avoiding rolling back. Pulling over: Turn on the right signal for 3 seconds before pulling over, the right wheel should not be more than 30 cm from the roadside, engage the parking brake, and shift to neutral. Subject 3 scoring criteria: The following situations result in immediate failure: Not wearing a seatbelt as required; Obstructing or turning off in-vehicle audio/video monitoring devices; Not following the examiner's instructions; Rolling back more than 30 cm when starting; Gear and speed mismatch for an extended period, causing engine RPM to be too high or too low; Failing to shift gears twice in a row while driving; Coasting in neutral while driving; Not following traffic signals, signs, or markings; Not driving at the required speed; Driving over solid center lines or lane edge lines; Driving over lane dividers for more than 15 seconds; Changing two or more lanes consecutively; Parking in no-parking zones like crosswalks or grid lines; Not attending the test at the scheduled time. The following situations result in a 10-point deduction: Rolling back less than 30 cm when starting; Shifting to the wrong gear when starting or driving; Not using or incorrectly using turn signals before starting, turning, changing lanes, overtaking, or parking; Turning the steering wheel less than 3 seconds after activating the turn signal before starting, turning, changing lanes, overtaking, or parking; Stalling the engine once due to improper operation. Vehicle preparation: Failure to walk around the vehicle counterclockwise to inspect the exterior and surroundings results in failure. Starting: The following situations result in immediate failure: Starting with insufficient brake pressure; Starting with the door not fully closed; Starting the engine with the gearshift not in neutral; Starting without releasing the parking brake and failing to correct it promptly. The following situations result in a 10-point deduction: Starting without releasing the parking brake but correcting it promptly; Not releasing the ignition switch promptly after starting the engine. Gear shifting: Failure to shift gears smoothly as instructed results in failure; Mismatch between vehicle speed and gear results in a 10-point deduction. Pulling over: Parking with the vehicle body crossing the right edge line or crosswalk results in failure; Not closing the door after exiting the vehicle results in failure; Parking with the vehicle body more than 30 cm from the right edge line or sidewalk results in a 10-point deduction; Not engaging the parking brake after parking results in a 10-point deduction; Releasing the foot brake before engaging the parking brake results in a 10-point deduction; Not turning off the engine before exiting the vehicle results in a 5-point deduction. Going straight through intersections, turning left or right at intersections: Failure to slow down or stop to observe as required results in failure. Passing crosswalks, school zones, or bus stops: Failure to slow down as required results in failure.
Was this review help?
14
4
Share
GeorgeFitz
08/11/25 5:51am
I remember when I was taking my driver's license test, the temporary ID card was completely acceptable for the subject three exam because it is an official document issued by the public security department and serves the purpose of identity verification, legally equivalent to a formal ID card. For example, once I accompanied a friend to the test, and his temporary ID was still within the validity period, so he passed subject three smoothly; there were no obstacles throughout the process. The key is to ensure the temporary ID is still valid, usually for about three months, to avoid any trouble caused by expiration. It's advisable to prepare your documents early and not leave it until the last minute. The test also involves security verification to prevent proxy test-takers, so having complete documents means there's nothing to worry about. The driving test isn't just about skills; having all your documents in order can help you face the exam with more confidence.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

How Long Is the Warranty Period for the Transmission?

The warranty period for an automotive transmission is generally no less than 40,000 kilometers or two years. Below are detailed explanations regarding the warranty period for automotive transmissions: 1. Currently, our country mandates that manufacturers provide a warranty for the engine of no less than 40,000 kilometers or two years. Most vehicles now offer an engine warranty that meets or exceeds this minimum national requirement. 2. The repair warranty period for household automotive products is no less than 3 years or 60,000 kilometers, whichever comes first; the three-guarantee validity period for household automotive products is no less than 2 years or 50,000 kilometers, whichever comes first. The repair warranty period and three-guarantee validity period for household automotive products are calculated from the date the seller issues the purchase invoice. 3. Within 60 days from the date the seller issues the purchase invoice or within 3,000 kilometers (whichever comes first), if major components of the engine or transmission exhibit quality issues, consumers may opt for a free replacement of the engine or transmission.
3
3
Share

What is the normal idle speed for a car?

When the engine is warm, the idle speed is generally between 550-800 RPM; when the engine is cold, the idle speed is usually between 950-1300 RPM. Below are detailed explanations about car idle speed: 1. Car engine idle speed is one of the engine operating conditions. The idle performance of the engine has a significant impact on emissions, fuel consumption, and comfort. The engine speed during idle is called the idle speed, which should not be too high or too low. If it's too high, it will increase fuel consumption; if it's too low, it will cause unstable engine idle speed. 2. The idle speed of a car differs between cold and warm engine states. Generally, for a well-performing engine under warm conditions, the idle speed is between 550-800 RPM. 3. In a cold state, the car needs to allow the engine to quickly enter the normal working environment after starting. Therefore, during a cold start, the engine's computer automatically injects more fuel, burning more fuel than normal idle to rapidly increase the engine's water temperature and quickly bring the engine to a suitable temperature. Hence, the engine idle speed is higher when cold, generally between 950-1300 RPM. Once the engine temperature rises to a certain level, the idle speed will decrease to the normal value. 4. Idle speed is not necessarily better if it's lower or higher. Since the engine often needs to operate in idle conditions, statistics show that about 30% of urban vehicle fuel consumption occurs during idle. Therefore, reducing fuel consumption during idle is crucial, which is also a requirement for idle control. 5. The main measure to reduce idle fuel consumption is to lower the idle speed. Foreign research indicates that reducing the idle speed by 100 RPM is equivalent to gaining an extra mile per gallon of gasoline. This requires that during engine idle conditions, the speed should not deviate too much from the optimal idle speed when subjected to external disturbances.
1
3
Share

What are the differences between gasoline engine oil and diesel engine oil?

There are several differences between gasoline engine oil and diesel engine oil: 1. Different fuel economy grades. According to the ACEA European Lubricant Classification Standard, the latest classification consists of three series: A/B series for gasoline and light-duty diesel engine oils; C series for catalyst-compatible engine oils; and E series for heavy-duty diesel engine oils. 2. The compression ratio of diesel engines is more than twice that of gasoline engines, and their main components endure much higher temperatures, pressures, and impacts than gasoline engines, leading to differences in the materials used for some parts. 3. Diesel fuel contains more sulfur than gasoline. This harmful substance forms sulfuric or sulfurous acid during combustion, which, along with high-temperature and high-pressure exhaust gases, enters the oil pan, accelerating oil oxidation and degradation. Therefore, diesel engine oil formulations require more antioxidant additives and stronger alkaline properties. 4. Different oil viscosities. Diesel engines operate under harsher conditions and require stronger oil film strength (on friction surfaces), so diesel engine oil has higher viscosity to ensure proper engine lubrication.
17
5
Share

What is the purpose of the clutch?

The clutch is a component used to connect the engine and the transmission. The functions of the car clutch include the following points: 1. Facilitates smooth vehicle starting. During startup, the clutch temporarily separates the engine from the transmission and then gradually engages. Due to the sliding friction between the driving and driven parts of the clutch, the torque transmitted by the clutch can gradually increase from zero, allowing the vehicle's driving force to gradually build up, ensuring a smooth start. 2. Enables convenient gear shifting. During driving, gear changes are often required to adapt to different driving conditions, and the clutch is used during these shifts. 3. Prevents excessive stress on the drivetrain, avoiding damage. During emergency braking, the wheels suddenly decelerate sharply, while the drivetrain connected to the engine maintains its original speed due to rotational inertia. This often generates inertia torque in the drivetrain far greater than the engine torque, which can easily damage drivetrain components. 4. Reduces torsional vibration impact. The output torque of a car engine is usually unstable. During the engine's operating stroke, the inertia of the engine's rotating system can reduce torsional vibration, but the remaining impact still adversely affects the subsequent transmission and driveshaft. The damping springs in the clutch can significantly reduce torsional vibration impact from the engine, extending the lifespan of the transmission gears.
3
5
Share

How often should tires rest during long-distance driving?

It is recommended to take a break every 300 kilometers. Here are precautions for long-distance driving: 1. Driving requirements: Maintain a speed below 100km/h and keep engine RPM above 3000. After four consecutive hours of driving, the driver must rest for 20 minutes; Monitor fuel levels and refuel promptly. After 20 continuous hours of operation (calculated at 100km/h), pay attention to the radiator temperature. 2. Inspection: First, check tire pressure to ensure all four tires have equal pressure; Second, inspect tire wear. The small triangle indicator on the tire sidewall can help determine if the tire needs replacement; Perform dynamic balance testing for each tire. In winter, low temperatures make tire rubber harder and more brittle, significantly reducing the friction coefficient. Therefore, tire pressure should not be too high or too low. Prolonged driving with low pressure in extremely cold temperatures accelerates tire aging; Remove debris lodged in tire treads. Avoid using tires that have been repaired more than once, and replace heavily worn tires or those with different brands or tread patterns.
20
5
Share

How to Determine the Condition of a Car Battery?

There are several methods to determine the condition of a car battery: 1. Currently, over 80% of maintenance-free batteries come with a charge indicator. The colors visible in the indicator are generally divided into three types: green, black, and white. Green indicates sufficient charge, black indicates slight discharge, and white means the battery is dead and needs replacement. Specific details can be referred to the label on the battery. 2. Measure the battery voltage using a battery tester or multimeter. Under normal conditions, the no-load voltage of the battery should be around 13 volts, the load voltage should generally not be lower than 12 volts, and the starting voltage should not be below 9.5 volts. If the battery voltage is low, it may result in difficulty starting the vehicle or failure to start. 3. Check if there is noticeable bulging or deformation on both sides of the battery. 4. Look around the battery terminals for any white or green powdery substances, which are battery oxides. High-quality or new batteries usually do not develop these oxides easily. Once they appear, it indicates that the battery's performance is starting to deteriorate.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.