Can a successfully scheduled Subject 1 exam be canceled?

1 Answers
CamilaMarie
07/30/25 6:12am
Subject 1 exam can be canceled after successful scheduling, but it must be canceled at least one day in advance. Cancellation is not possible on the same day. If you are unable to attend the exam, an absence will be treated as a failure. Therefore, students should manage their time well to avoid missing the exam, otherwise, they will only waste money in vain. It's important to note that a retake of Subject 1 requires payment of a retake fee. Methods to cancel a scheduled Subject 1 exam: Depending on the status of the appointment, the cancellation method may vary. If scheduled online and the appointment is not yet confirmed, you can enter the scheduling interface online to cancel the exam appointment. Notes on canceling an appointment: If the appointment has been successfully scheduled and you have received an exam notification SMS, you need to bring your ID card and a written application to the local DMV's service window to cancel. At this point, the exam cannot be canceled online. Although there is no limit to the number of retakes for Subject 1, the ranking for rescheduling after cancellation will drop. If there are many candidates scheduling exams locally, the chance of successful scheduling next time will be lower.
Was this review help?
9
1
Share
More Forum Discussions

What is the difference between 4motion and quattro?

The differences between 4motion and quattro are as follows: 1. Different systems: 4motion is a front-wheel-drive system, typically with a 95% front and 5% rear torque distribution. However, this system includes electronic controls and clutch mechanisms that allow power to be transferred to the rear wheels when the front wheels lose traction. Quattro is a full-time all-wheel-drive system, which is relatively more fuel-consuming but offers greater handling benefits. 2. Differential locks: Quattro uses a Torsen (torque-sensing) self-locking center differential, a purely mechanical structure that enables seamless, zero-lag linear power distribution with superior reaction speed and reliability compared to electronically controlled systems. 4motion employs an electro-hydraulic multi-plate clutch for its center and rear differential locks, relying on computer calculations of wheel traction to adjust torque output. Quattro scores nearly perfect (100 points) in road performance, wet/snowy conditions, and gravel/mud performance, though its Torsen differential's locking coefficient doesn't reach 100%, limiting extreme off-road capability. 4motion scores around 70-80 points in road and wet/snowy/gravel/mud performance, with extreme off-road capability at about 80 points.
5
1
Share

Which part of the vehicle is controlled by the rotary switch in this position?

The rotary switch controls the following parts of the car: front and rear fog lights. Common types of fog light switches include rotary and push-button styles. Rotating forward (or pressing) the front fog light switch activates the front fog indicator and front fog light; rotating backward (or pressing) the rear fog light switch activates the rear fog indicator and rear fog light. Introduction to car fog lights: Fog lights are installed at the front and rear of the vehicle. Due to low visibility in foggy conditions, which limits the driver's line of sight, these lights can increase visibility distance. Particularly, yellow anti-fog lights have strong light penetration, enhancing visibility for the driver and other road users, allowing oncoming vehicles and pedestrians to detect each other from a greater distance. Precautions for using fog lights: Fog lights must be turned on when visibility is below 200 meters. If the weather is clear with no rain or fog, it is advisable not to use fog lights, as front fog lights are not equipped with light covers. Using fog lights in clear weather can affect the illumination of the vehicle's lights and create certain obstacles for driving.
9
2
Share

What are the reasons for the jerking sensation in the Nissan X-Trail?

During high-speed coasting deceleration, there is a noticeable occurrence and disappearance of engine braking, with the braking speed range maintained between 20~90 km/h. After the occurrence, there will be a subsequent jerk, and even after disappearance, there will still be some jerk. Absence of a one-way clutch leads to: Without discussing the durability of this transmission, even after upgrading the steel belt, it can still last over a hundred thousand kilometers, which is generally the mileage for most household vehicles. The key point is that the CVT lacks a one-way clutch, resulting in noticeable engine braking appearing and disappearing during high-speed coasting deceleration. Poor reliability and average durability: The CVT transmission is merely a simplified version of automatic transmissions designed to cut costs. Van Doorne's invention of this machine once had a hint of "corner-cutting," but in the European market, it was essentially a dead end from the start. This type of transmission, with its poor reliability, average durability, and compatibility only with low-torque engines, failed to gain acceptance among Europeans. It was later picked up by Japanese automakers, who were resource-constrained at the time.
19
4
Share

Where is the engine number located on the Qingling gasoline pickup truck?

The engine number of the Qingling gasoline pickup truck is generally located near the starter. There are two locations for the chassis number: a row of small characters in the lower left corner of the windshield, and another on the body near the right front wheel. It usually consists of a combination of 7 to 8 digits and English letters. In addition to the above methods, the engine number can also be checked through the following four ways: The vehicle's driving license prints the engine number, usually located on the second-to-last line; The motor vehicle registration certificate will state the engine number; The car purchase invoice will state the engine number; The vehicle purchase tax payment certificate will state the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specification and size of the engine within the manufacturer, and engine models can be the same. The engine number refers to the production number of the engine, where each engine can only use one engine number, and each engine's number is unique.
17
4
Share

Is a Car Manufactured Half a Year Ago Considered a Stock Car?

There is no clear definition of a stock car, but in the automotive sales industry, the term 'stock car' is indeed used. Generally, it refers to vehicles that have been in stock for more than three months or half a year. For imported cars, due to factors such as transportation cycles, models that are more than one year from the manufacturing date are also considered stock cars. Below are more related reasons why it is not recommended to buy stock cars: 1. After a new car leaves the factory, various fluids, electronic components, batteries, rubber seals, and tires may not undergo periodic inspections and maintenance during prolonged storage, making them prone to moisture damage and aging. 2. Only a very few dealers implement periodic inspection and maintenance measures. The cost is actually not high, but it consumes manpower and time. Some 4S stores even have open-air parking lots where new cars are directly exposed to the sun, wind, and rain. 3. For stock cars stored for too long, without proper warehouse management, the aging of electronic components and rubber products is difficult to detect without professional testing equipment. Many vehicles stored for too long also experience issues like lack of oil or power.
8
4
Share

Is the BMW X1 considered an SUV?

BMW X1 is classified as a compact SUV. Configuration: The latest model of BMW X1 is front-wheel drive, and the front-wheel-drive version offers more interior space. The new BMW X1 is equipped with two engines: one is a 1.5-liter three-cylinder turbocharged engine, and the other is a 2.0-liter turbocharged four-cylinder engine. The 1.5-liter turbocharged engine delivers 140 horsepower and a maximum torque of 220 Nm. The maximum power output of this engine is achieved between 4,600 and 6,500 rpm, while the maximum torque is available from 1,480 to 4,200 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. Driving Experience: The BMW X1's seating position is designed low enough that you don't feel like you're sitting high up in an SUV. The hood lines that converge toward the grille provide a more expansive field of view compared to driving a sedan. The steering somewhat diminishes BMW's sharp handling feel, with the steering wheel offering light damping and a noticeable electronic feel. The front end's response to steering inputs is also less sensitive.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.