Can a Spark Plug with Cracked Ceramic Still Be Used?

1 Answers
AlainaDella
07/29/25 11:10pm
Spark plugs with cracked ceramic cannot be used, as the ceramic serves as the insulator for the spark plug and affects the operation of the car's engine. Removing and installing spark plugs requires specialized tools, which can be rented or borrowed. The installation and removal must be performed with the appropriate torque corresponding to the spark plug's size, as not all vehicle models use mainstream spark plugs. Automobile spark plugs, commonly known as spark plugs, function by discharging the high-voltage pulses sent from the high-voltage wire (spark plug wire), breaking down the air between the two electrodes of the spark plug to generate an electric spark, thereby igniting the air-fuel mixture in the cylinder. The key component of a spark plug is the insulator. If the insulator fails, the high voltage will 'take a shortcut' without passing through the two electrodes to the ground, resulting in a no-spark condition.
Was this review help?
19
2
Share
More Forum Discussions

Where is the sunroof switch for the BMW 320i located?

The sunroof switch for the BMW 320i is located on the ceiling reading light area above the front seats. Here is additional information about the BMW 320i sunroof switch: 1. Automatic operation: Open: Pull the switch backward firmly. Close: Push the switch forward to close the sunroof. 2. Manual operation: Open: Gently pull the switch backward and hold it until the sunroof reaches the desired position. Close: Push the switch forward before reaching the desired position. 3. Panoramic sunroof glass lift: Press the center of the panoramic sunroof glass switch. The sunshade will automatically open, and the panoramic sunroof glass will begin to rise. Close: Push the button forward.
14
1
Share

How to Measure the Throttle Position Sensor?

Here are the methods for measuring the throttle position sensor: 1. Unplug the connector from the throttle position sensor and turn on the ignition switch. 2. Measure the voltage between Vcc and the idle contact, as well as between Vcc and the wide-open throttle contact; the readings should be 4.5-5.5V. 3. If the readings do not meet the requirements, check the ECU connection circuit. If the voltage values are correct, inspect the throttle potentiometer resistance. 4. Unplug the throttle potentiometer connector and measure the resistance between Vcc and the idle contact; it should be 1.5-2.6kΩ. 5. Measure the resistance between Vcc and VTH; at idle, it should be 0.75-1.3KΩ.
11
1
Share

Should the car door be replaced if it is dented?

Whether a dented car door needs to be replaced depends on the severity of the dent. If the dent is minor, it can be resolved through metal sheet repair. If the dent is severe, the door may need to be replaced. After a car door is dented, it should be addressed promptly to prevent rusting. Methods for maintaining the car body are as follows: 1. Waxing: Prevents the paint from coming into contact with air, slowing down the oxidation process. 2. Polishing: Removes the aged paint film, allowing the new paint film to restore its shine. 3. Glazing: Enhances the gloss and hardness of the car surface, effectively reducing scratches. 4. Coating: Reduces damage to the car paint from external environmental factors, ensuring the gloss of the paint surface does not diminish and extending the lifespan of the car paint.
12
0
Share

What does the battery model number represent?

Taking a battery with the model number 6-QA(W)-54a as an example, the explanation is as follows: 1.6 indicates that it consists of 6 single cells, each with a voltage of 2V, meaning the rated voltage is 12V. 2.Q represents the battery's purpose: Q stands for automotive starting batteries, M for motorcycle batteries, JC for marine batteries, HK for aviation batteries, D for electric vehicle batteries, and F for valve-regulated batteries. 3.A and W indicate the battery type: A stands for dry-charged batteries, W for maintenance-free batteries, and if not marked, it indicates a standard battery. 4.54 denotes the battery's rated capacity of 54Ah (the amount of electricity output by a fully charged battery when discharged at a 20-hour rate discharge current at room temperature for 20 hours). 5.The subscript a indicates the first improvement to the original product, with subscript b added to the name for the second improvement, and so on.
4
1
Share

Where is the installation position of the child seat?

Car child safety seats, also known as child restraint systems, are generally recommended to be installed in the rear seat near the door or on either side of the rear seats, as these positions are considered the safest in a vehicle. Among them, the position directly behind the driver is the safest. Below is relevant information about child seats: 1. Car child safety seats are specifically designed for children of different ages (or weights), installed inside the vehicle to effectively enhance child passenger safety. 2. According to European Regulation ECE R44/03, a child safety seat is defined as a device that can be secured to a motor vehicle. 3. It is a child safety protection system consisting of a harness with buckles, flexible components, adjustment mechanisms, accessories, etc. 4. It can be combined with additional devices such as portable cots, infant carriers, booster seats, or impact shields. 5. In the event of a collision or sudden deceleration, it reduces the impact force on children and limits their body movement to minimize injuries, ensuring the safety of child passengers.
2
5
Share

What to Do When ETC is Disabled?

ETC being disabled is due to reasons such as unpaid fees, resulting in the ETC system blacklisting the vehicle. The owner can bring their original ID card, original vehicle registration certificate, and ETC card to the issuing bank's ETC service outlet to complete the ETC blacklist removal procedure as guided by the staff. Below are the corresponding solutions for different ETC restrictions: 1. If the ETC card has unpaid fees or other abnormal statuses, the outstanding fees must be settled first, then wait for the bank or issuing institution to remove the restriction within the specified time. 2. If there is a discrepancy between the ETC recorded vehicle information and the actual vehicle information, you can only update the information at the relevant ETC service outlet. 3. For special business cases, you need to contact the relevant issuing institution to apply for removal. 4. If the restriction is due to suspected evasion of toll fees, it is recommended to pay the outstanding fees as soon as possible, as delays may affect future travel or personal credit.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.