Can a smart car run long distances?

2 Answers
DiKyle
08/27/25 4:24am
smart cars can run long distances, but if it is a smart car that needs to be charged, it is recommended not to drive too far to avoid running out of power halfway. The smart is a microcar, suitable for short trips, but for long-distance travel, the comfort of the driver and passengers may be quite poor over time, so it is best not to use it for long distances. In most cases, the smart can serve as the second or third car in a household for urban commuting. Here is a brief introduction to the smart: 1. smart is a brand under Mercedes-Benz, primarily targeting the microcar market. The smart models currently on the market include the smart fortwo and smart forfour, which differ mainly in being two-door and four-door versions, respectively, while being similar in configuration and power. Below, the smart fortwo will be used as an example for detailed explanation. 2. In terms of power, the smart fortwo is equipped with a 1.0-liter naturally aspirated engine and a 0.9-liter turbocharged engine. The 1.0-liter naturally aspirated engine version has a maximum horsepower of 71 hp, while the 0.9-liter turbocharged engine version has a maximum horsepower of 90 hp. 3. In terms of fuel consumption, according to the comprehensive fuel consumption data from the Ministry of Industry and Information Technology, the 1.0-liter version of the smart fortwo has a comprehensive fuel consumption of 4.4L/100km, and the 0.9-liter version has a comprehensive fuel consumption of 4.9L/100km.
Was this review help?
10
0
Share
ColtonMarie
09/09/25 3:26am
As a frequent urban commuter driving a Smart, I can share my firsthand experience: the Smart handles long-distance trips without major issues, but be prepared for some discomfort. City driving is smooth, with its compact size making parking a breeze; however, on the highway, engine noise becomes noticeable, and wind vibration can be annoying—after two hours, your back might ache. Limited space is a significant drawback, with the rear seats barely usable and luggage space limited to a small backpack—far from the capacity of an SUV. The upside is its low fuel consumption; my Smart averages around 5L/100km on highways, which is genuinely cost-saving. Before long trips, always check tire pressure and coolant levels, and opt for suburban routes to avoid traffic. I've managed a 200-kilometer journey, but it's barely tolerable—don't make it a frequent ordeal, as it's quite exhausting. I'd recommend trying a short trip first before committing.
Was this review help?
14
2
Share
Expand All
More Forum Discussions

What is the difference between a car DSP and an amplifier?

The differences between a car DSP and an amplifier are as follows: 1. Connectivity with a computer: A DSP can be connected to a computer for better management of the amplifier, whereas an amplifier cannot be connected to a computer. 2. Functionality: A DSP can perform active frequency division and delay processing, while an amplifier lacks the processing capabilities of a DSP. Below is additional information: 1. A DSP is a microprocessor designed to process large amounts of information using digital signals. Its working principle involves receiving analog signals, converting them into digital signals of 0s and 1s, then modifying, deleting, or enhancing these signals before translating them back into analog data or real-world formats in other system chips. 2. An amplifier, or audio power amplifier in a car audio system, selects and preprocesses input audio signals, amplifies their power, and enables the electrical signals to drive speakers.
13
2
Share

How many liters of fuel can a Toyota Prado hold?

Toyota Prado can hold 90 liters of fuel. Precautions for the Toyota Prado fuel tank: (1) The fuel tank storage location must be safe to prevent fires. The fuel tank or oil drum should be placed separately in a visible location, appropriately far from the diesel generator set, and smoking is strictly prohibited; (2) If Toyota Prado users make their own fuel tanks, they should note that the backup diesel generator set fuel tank should be made of stainless steel or steel plates. Do not paint or galvanize the inside of the fuel tank, as these can chemically react with diesel, producing impurities that may damage the diesel generator set and reduce the quality, cleanliness, and combustion efficiency of the diesel; (3) After placing the fuel tank, the highest oil level should not exceed 2.5 meters above the base of the diesel generator set. If the oil level in a large oil depot is higher than 2.5 meters, a daily fuel tank should be added between the large oil depot and the diesel generator set to ensure that the direct fuel delivery pressure does not exceed 2.5 meters. Even when the diesel generator set is shut down, fuel is not allowed to flow into the diesel engine via gravity through the fuel inlet or injection lines; (4) The resistance at the fuel port must not exceed the specified value for using a clean filter element as stated in all diesel generator set performance data sheets. This resistance value is based on the fuel tank being half full.
6
5
Share

What is the trunk capacity of the CRV?

CRV trunk capacity is 520L. How to open the Honda CRV trunk: 1. The car doors need to be unlocked to open the trunk. 2. Go to the trunk, locate the trunk switch (usually above the license plate frame), and pull it to automatically open the trunk. 3. To close, simply pull the handle and shut it. Several methods to open the trunk in Honda models: 1. Gently lift the trunk button to open the trunk lid. 2. If the button doesn’t work, you can use the key to unlock it directly. Many models allow direct trunk unlocking via the key—just press the trunk unlock button on the key. 3. Some models have two additional buttons on the trunk for closing the trunk and closing the trunk while locking the car. Use these buttons to close the trunk.
9
5
Share

How to Turn on High Beam and Low Beam?

The control for high beam and low beam is located on the lever on the left side of the steering wheel. The middle position is for low beam, while the first and third positions are for high beam. The high beam icon is blue with a straight line shape, while the low beam icon is green with a downward-sloping line. Press the corresponding button to turn on the high or low beam, and the lever is moved up and down to switch between them. Here are some relevant details: 1. There is a lever on each side of the steering wheel. The right one is mostly for wiper control, while the left one is for light control, including switching between high and low beams, turn signals, etc. 2. The lever for controlling the light group moves up and down for high and low beams, and forward and backward for turn signals. 3. Both high beam and low beam are part of the headlights, mainly used for nighttime driving illumination. The high beam has a higher angle and longer range, suitable for poorly lit or low-visibility road conditions. The low beam has a lower angle and shorter range, mostly used for well-lit roads with good visibility.
12
3
Share

Is it normal to hear a ticking sound when the engine is warm?

It is normal to hear a ticking sound when the engine is warm. This sound is usually produced by the high-pressure fuel pump or the valves. Many engines equipped with direct injection technology have a high-pressure fuel pump, which can produce a ticking sound during operation. The sound from the valves is caused by increased clearance due to wear between the camshaft and the valve lifters, which is also a normal phenomenon. Here is some relevant information: 1. As the mileage of the car increases, some components inside the engine may experience wear. Direct injection technology has been widely used in car engines. Because the injection pressure of direct injection is very high, direct injection engines also have a high-pressure fuel pump. 2. In a direct injection engine, the fuel injector is installed on the cylinder head and directly injects fuel into the combustion chamber, where the fuel mixes with air. Direct injection technology can improve engine power and fuel economy. The fuel atomization in the engine is better, allowing for more thorough mixing of fuel and air.
19
0
Share

How often should the Tharu be serviced?

The Volkswagen Tharu comes with two turbocharged engine options: 1.4T and 2.0T. For regular maintenance, it is recommended to use at least semi-synthetic oil, but full-synthetic oil is the best choice as it offers superior quality in all aspects. With full-synthetic oil, you can schedule a routine service once a year or every 10,000 kilometers. Here are the five key points for engine maintenance: 1. Use the appropriate grade of engine oil and change it along with the oil filter regularly (every 5,000 kilometers); 2. Maintain the air filter frequently and replace it periodically (every 20,000 kilometers); 3. Clean the fuel system regularly and replace the fuel filter (every 30,000 kilometers); 4. Service the radiator cooling mesh periodically (every 30,000 kilometers); 5. Replace the spark plugs (every 40,000 kilometers or based on driving conditions).
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.