···
Log in / Register

Can a small pit in the car windshield be repaired?

4 Answers
JoelAnn
07/29/25 1:14pm
It can be repaired. Take it to a repair shop or a vehicle windshield replacement store to have the windshield repaired. After the repair is completed, the small pit will disappear, which helps improve the appearance of the windshield and provides the driver with better visibility for safe driving. Here is some additional information: 1. Precautions for windshield replacement: After the windshield is replaced, the vehicle should not be driven at high speeds and should be parked for 3 to 5 days. This allows the adhesive used to fix the windshield to dry completely. Avoid rainy conditions during this period. If the windshield replacement is not handled properly, it may lead to leaks during later use. 2. Impact of windshield replacement: Replacing the windshield due to reasons other than a traffic accident will not have any impact. However, replacing the windshield after an accident may have certain effects. When driving on the road, the windshield is easily broken by stones and needs to be replaced; otherwise, it may affect usage.
Was this review help?
7
0
Share
VanHeidi
08/14/25 3:13am
Yes, small pits on the car's windshield can usually be repaired. I've been driving for many years and have encountered similar situations: once, a flying stone on the highway hit the glass, leaving a small dent. At first, it seemed quite troublesome, but after consulting a professional shop, they said it could be fixed. They used a resin to fill the pit and then cured the resin with a UV light for a few seconds. The entire process took about 20 minutes and cost less than 200 yuan. After the repair, the small pit was almost invisible, didn't affect driving visibility, and prevented the crack from expanding or water ingress causing more serious problems. Now, I think it's important to regularly check the windshield and repair any small flaws immediately, as it saves money and ensures driving safety. Remember, the key to repair is to address the pit while it's still small. Delaying may require replacing the entire windshield, which is much more costly. In short, don't ignore small pits; simple repairs can extend the glass's lifespan.
Was this review help?
15
1
Share
Expand All
VioletLynn
08/14/25 3:15am
Small pits can definitely be repaired; this is a common minor issue. I understand the repair process: technicians first clean the dust from the pit, then use tools to inject liquid resin into it, followed by rapid curing with UV light to harden the resin, which is then sanded smooth. The advantage is that the cost is low, typically ranging from a few dozen to three hundred yuan, whereas replacing the glass would cost thousands. For small pits, the repaired strength is almost restored to its original state, effectively preventing the pit from expanding into a crack that could compromise safety. Personally, I recommend checking the glass after driving on roads with large temperature variations or frequent vibrations, and repairing any pits early. Also worth mentioning is that some car insurance policies can cover such minor repair costs. In short, don’t overlook small pits—the benefits of repairing them outweigh the drawbacks.
Was this review help?
7
0
Share
Expand All
StVanessa
10/09/25 8:37am
Small dents in car windshields can generally be repaired. From a safety perspective, this is crucial: small dents are prone to expanding into large cracks when the vehicle is jolted or subjected to sudden temperature changes, which can obstruct vision and lead to accidents. The repair process is simple and quick, typically involving filling the dent with a special resin and then curing it to prevent crack propagation. Cost-wise, it's economical—repairs cost at most a few hundred dollars, much cheaper than replacing the entire windshield. I recommend that drivers address small dents promptly by seeking professional services. As a side note, maintaining a safe distance from other vehicles at high speeds can reduce the risk of stone impacts, but if a dent does occur, decisive action should be taken.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

What Causes the Engine Light to Illuminate on the Car Dashboard?

The reasons for the engine light illuminating on the car dashboard are: 1. Sensor issues; 2. Poor engine maintenance; 3. Substandard fuel quality; 4. Poor combustion of the air-fuel mixture; 5. Dirty air filter in the car; 6. Damaged catalytic converter or thermostat; 7. Engine misfire. Other indicator lights on the car dashboard include: 1. Seatbelt indicator: Shows whether the seatbelt is locked; 2. Door indicator: Displays the status of each door; 3. Oil pressure indicator: Shows the oil pressure status inside the engine; 4. Coolant temperature indicator: Displays the temperature of the coolant in the engine; 5. Handbrake indicator: Shows the status of the vehicle's handbrake.
15
2
Share

How long after replacing the windshield can I drive?

You can drive approximately 12 hours after replacing the windshield. Post-replacement precautions include: 1. Do not wash the car for three days, and remove the adhesive tape fixing the windshield position after three days; 2. Try to avoid driving on excessively bumpy roads; 3. Avoid emergency braking and rapid acceleration; 4. Do not insert parking permits or other cards into the gap between the windshield and the dashboard; 5. Avoid highway driving and keep the speed below 80 km/h; 6. Do not apply window tint within seven days; 7. Do not open the windows while driving for three days. The function of the windshield is to maintain a certain level of clarity when impacted and cracked, ensuring the driver's field of vision remains unaffected and withstanding strong impacts.
14
3
Share

What is the reason for frequent scratches on the window glass when rolling up and down?

The reason for frequent scratches on the window glass when rolling up and down is: there is sand and dirt inside the window rubber seal, which causes friction when the glass moves. The solution is to replace the rubber seal or clean it. The maintenance methods for window glass are: 1. Use a soft cloth when cleaning the car; 2. Use more glass cleaner to wash the glass. The window is an important part of the entire car body, serving to meet the needs of interior lighting, ventilation, and visibility for the driver and passengers. Depending on the installation position, the glass is divided into: front and rear windshields, side windows, and door windows. The window structure is usually a curved and sealed type, with rubber sealing strips connecting the window frame and the glass on the car body.
13
5
Share

What are the reasons for the engine stalling and failing to start when hot?

The reasons for the engine stalling and failing to start when hot are: 1. Fuel injector leakage; 2. Damaged carbon canister solenoid valve; 3. Poor fuel quality; 4. Faulty intake air temperature sensor; 5. Engine carbon deposits; 6. Poor fuel quality; 7. Insufficient fuel supply pressure from the fuel pump; 8. Damaged crankshaft position sensor; 9. Faulty engine main relay. The solutions for the engine stalling and failing to start when hot include: 1. Replace the engine oil; 2. Adjust the resistance value of the crankshaft position sensor at a repair shop; 3. Replace the spark plugs or adjust the ignition voltage; 4. Reset the throttle data and adjust the central control at a repair shop.
13
4
Share

What engine does the Lynk & Co 05 use?

Lynk & Co 05 uses a Volvo engine. The Lynk & Co 05 is a compact SUV under the Lynk & Co brand. Taking the Lynk & Co 05 2020 model two-wheel drive Yao as an example, its body dimensions are: length 4592 mm, width 1879 mm, height 1628 mm, wheelbase 2734 mm, and curb weight 1738 kg. The Lynk & Co 05 2020 model two-wheel drive Yao is equipped with a 2.0T turbocharged inline 4-cylinder engine, with a maximum power of 187 kW, maximum power speed of 5500 rpm, maximum torque of 350 Nm, and maximum torque speed ranging from 1800 to 4800 rpm.
13
3
Share

Will the fan run if the water temperature sensor is broken?

If the water temperature sensor is broken, the fan will not run. The symptoms of a broken water temperature sensor include: 1. The water temperature gauge needle does not move; 2. Difficulty starting a cold engine; 3. The ECU cannot receive the signal for a rich air-fuel mixture; 4. Only a lean air-fuel mixture can be provided to the engine; 5. Unstable idle and difficulty accelerating. The water temperature sensor consists of a thermostat part and a water level control part, and it is accompanied by a pressure reducing device before the electric valve and a rotary muffler heater for heating. The functions of the water temperature sensor are: 1. Increasing the fuel injection volume at low temperatures; 2. Increasing the ignition advance angle at low temperatures; 3. The ECU controls the idle control valve based on the water temperature sensor signal at low temperatures to increase the idle speed; 4. Delaying ignition at high temperatures to prevent knocking.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.