Can a sedan drive on the Sichuan-Tibet Line?

1 Answers
SabrinaAnn
07/29/25 2:31pm
Nowadays, sedans can drive on the 318 Sichuan-Tibet Line. Below is relevant information about whether sedans can travel on the Sichuan-Tibet Line: 1. Introduction to the Sichuan-Tibet Line: The Sichuan-Tibet Line, with a total length of 2,146 kilometers, has over 500 kilometers of expressways, including the Ya'an-Kangding Expressway and the Linzhi-Lhasa Expressway. However, due to the mountainous terrain, it is recommended to choose SUVs or off-road vehicles for better performance. 2. Overall road conditions on the Sichuan-Tibet Line are not ideal: First, the roads are steep with numerous high peaks. There are 15 major peaks to cross along the way, as well as continuous curves like those at Zheduo Mountain. Second, the road conditions are poor, often encountering mountain floods, mudslides, landslides, and falling rocks.
Was this review help?
10
1
Share
More Forum Discussions

What is the ground clearance of the Honda Haoying?

Honda Haoying's ground clearance is 193mm when fully loaded and 208mm when unloaded. Below is the relevant introduction of the Honda Haoying: Dimensions: The Honda Haoying is an SUV model under GAC Honda, with a body length, width, and height of 4634mm, 1855mm, and 1679mm respectively. Appearance: The Honda Haoying adopts GAC Honda's own family design elements. The front grille is decorated with a large number of chrome strips and connected to the headlight groups on both sides. Additionally, it features a three-section air intake design below, making the overall appearance more sporty.
13
5
Share

Is the Volkswagen Tayron compliant with China VI emission standards?

The Volkswagen Tayron complies with China VI emission standards. The Tayron is a mid-size SUV under FAW-Volkswagen, with body dimensions of 4589mm in length, 1860mm in width, and 1660mm in height, featuring a wheelbase of 2731mm, front track of 1576mm, and rear track of 1566mm. The 2020 Intelligent Connect Edition Volkswagen Tayron adopts a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.4L turbocharged engine delivering maximum power of 150PS (110kW) and peak torque of 250Nm, paired with a 7-speed dual-clutch transmission.
8
3
Share

What to Do When Car Paint Gets Scratched?

The solutions for scratched car paint are: 1. Use a mixture of soap, appropriate amount of ammonia, and turpentine to apply and wipe the scratched area; 2. Repeatedly stick and peel transparent tape on the paint; 3. Use essential balm to wipe the paint; 4. Use an eraser to rub off the paint; 5. Use a cleaner to wipe the paint; 6. Use a hair dryer to dry the paint and then scrape it off with a thin blade. The functions of car paint are: 1. Protect the car from erosion by various corrosive media in the atmosphere; 2. Decorate the car; 3. Identify the type of car; 4. Improve the comfort and sealing of the car, preventing noise caused by vibration.
7
1
Share

How Many Cylinders Does the Focus Engine Have?

The Focus engine is a three-cylinder. The functions of the engine are: 1. To fully combust the fuel input into the cylinders to generate power; 2. To determine the vehicle's power, fuel efficiency, stability, and environmental performance. Taking the 2021 Focus Fengyue model as an example, its body dimensions are: 4647mm in length, 1810mm in width, and 1468mm in height, with a wheelbase of 2705mm and a fuel tank capacity of 53 liters. The 2021 Focus Fengyue model features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 122ps, a maximum power of 90kw, and a maximum torque of 153nm, paired with a 6-speed manual transmission.
1
2
Share

How many liters of brake fluid are needed for a single replacement?

Brake fluid replacement requires 1 liter. The replacement method is as follows: 1. Turn off the vehicle and open the hood to extract the fluid from the reservoir; 2. Use a funnel to pour the new brake fluid into the reservoir; 3. Lift the vehicle with a jack and remove the tires; 4. Remove the rubber dust cap from the brake caliper; 5. Loosen the bleeder screw and attach a rubber tube to it, connecting it to a drainage bottle; 6. Press the brake pedal and observe the fluid drainage; 7. Start the vehicle and perform a brake test. Brake fluid is composed of castor oil and low-carbon alcohol. Its functions include: 1. Lubricating components of the braking system; 2. Preventing rust and corrosion of brake pads; 3. Assisting in cooling and dissipating heat from the brake pads.
13
3
Share

Is the Three-Way Catalytic Cleaner Useful for Three-Way Catalytic Converter Blockage?

The three-way catalytic cleaner is useful for three-way catalytic converter blockage. Its function is to remove sulfur and phosphorus chemicals from the surface of the three-way catalytic converter, unclog the exhaust pipe blockage, and restore the activity of the three-way catalytic converter. The cleaning steps for the three-way catalytic cleaner are: 1. Start the vehicle for preheating and connect the hanging tube to the three-way catalytic cleaner; 2. Insert the device into the vacuum tube connected to the engine; 3. Start the engine and open the device control valve to allow the three-way catalytic cleaner to form droplets in the viewing window; 4. Keep the engine idling to allow the cleaner to drip completely; 5. After cleaning, turn off the engine and reconnect the pipelines; 6. Let the engine idle to discharge any remaining liquid.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.