Can a Sedan Carry 1000 Jin?

1 Answers
VonElle
07/30/25 1:45am
Occasionally carrying such a load once is fine, but doing so long-term will damage the vehicle. For some compact sedans, a 1000-jin load already constitutes overloading. Overloading shortens the vehicle's lifespan and accelerates component aging; increases tire wear and deformation; hastens engine damage; makes steering heavier and increases centrifugal force, compromising handling performance; reduces braking efficiency, extending unsafe stopping distances; shortens leaf spring lifespan and diminishes off-road capability. The damages caused by overloading are as follows: 1. Shortens vehicle lifespan and accelerates component aging: Vehicle load limits are predetermined during manufacturing. Overloading alters original design parameters, causing issues like loose rivets, detached fasteners, and frame deformation. This accelerates aging of rubber/plastic components. 2. Increases tire wear and deformation: Tires are designed with safety margins based on gross vehicle weight. Overloading causes excessive deformation and friction, drastically reducing tire lifespan. 3. Accelerates engine damage: Overloading severely stresses the engine through increased load and power deficiency. Prolonged low-speed operation leads to overheating and accelerated part wear, while also increasing fuel consumption and operational costs. 4. Heavy steering and increased centrifugal force compromise handling: Overloading magnifies centrifugal force during turns, reducing stability and increasing accident risks.
Was this review help?
2
0
Share
More Forum Discussions

What are the solutions for the abnormal noise in Peugeot 5008?

Solutions for the abnormal noise in Peugeot 5008 are as follows: 1. Abnormal noise from the air vents: Check if the air vents are loose or if the noise is caused by an installed perfume bottle. Tighten them or pad the edges with materials like 3M tape. 2. Abnormal noise due to loose central control panel: This situation is rare. The solution is to disassemble and re-tighten or wrap tape around the clips. Below is relevant information about Peugeot: 1. Introduction: Peugeot is a car brand under Peugeot Automobile Company, a subsidiary of the French PSA Peugeot Citroën Group. Peugeot Automobile Company is a long-established automobile manufacturer in Europe. 2. Logo meaning: The emblem of Peugeot is a standing lion. This lion has appeared on Peugeot products for 150 years. The lion can be seen on the engine cover or front grille of Peugeot cars.
2
0
Share

Where to check the average fuel consumption of Mercedes-Benz C-Class?

The fuel consumption of the Mercedes-Benz C-Class can be viewed by operating the display function switch button on the steering wheel of the driver. That is, by pressing the switch button, the fuel consumption display will appear after cycling through the options. Air Filter: The air filter can also affect the car's fuel consumption. When the air filter has not been replaced for a long time, it can become clogged, affecting the engine's air intake, which in turn can lead to increased fuel consumption. Carbon Deposit Issue: Many car owners might first think of carbon deposits when encountering increased fuel consumption. Carbon deposits are like grease on a range hood—difficult to clean. Carbon deposits can affect the compression ratio, causing poor ignition, thinning of the air-fuel mixture, and fuel adsorption. All these issues can impact fuel consumption.
14
5
Share

What is the speed limit for the slow lane?

60 kilometers per hour. Below is the relevant content introduction: 1. Relevant regulations: According to the "Road Traffic Safety Law" regulations: Article 78 Expressways shall indicate the driving speed of lanes, with the maximum speed not exceeding 120 kilometers per hour and the minimum speed not less than 60 kilometers per hour. On expressways, the maximum speed for small passenger vehicles shall not exceed 120 kilometers per hour, other motor vehicles shall not exceed 100 kilometers per hour, and motorcycles shall not exceed 80 kilometers per hour. 2. Multiple lanes: In the case of 2 lanes in the same direction, the minimum speed for the left lane is 100 kilometers per hour. For cases with 3 or more lanes in the same direction, the minimum speed for the leftmost lane is 110 kilometers per hour, the middle lane is 90 kilometers per hour, and the rightmost lane is 60 kilometers per hour.
11
4
Share

How to Choose a Used Car?

Here are the precautions for purchasing a used car: 1. Pay attention to the appearance: Some used cars have been involved in accidents. To increase the value of the car, dealers may refurbish it, repaint it to make it look newer. Therefore, when buying a car, pay attention to the appearance, observe all corners and parts of the car for signs of repainting, and check for wear on the tires, headlights, and bumpers. 2. Pay attention to the chassis and frame: After a car is involved in an accident, even if the exterior is well repaired, its frame and chassis are difficult to restore. If you find any deformation or bending, be cautious as the car may be an accident vehicle. 3. Pay attention to the car's performance: When selecting a used car, tap the body to listen for normal sounds, start the car to hear if the engine sounds normal.
14
3
Share

Will Original Factory Headlights Turn Yellow After Polishing?

Polishing car headlights can have certain effects, as it removes the protective layer on the surface of the headlights. Therefore, waxing is usually applied after polishing. However, the wax composition on the lamp surface tends to wear off quickly. Once the wax is gone, the headlight surface oxidizes rapidly without the protective layer, leading to a decrease in light transmittance. As a result, repeated polishing becomes necessary. Excessive polishing can make the headlight cover thinner and more prone to cracking. Relevant information about car lights is as follows: 1. Introduction: Car lights refer to the lamps on vehicles, serving as tools for road illumination during night driving and as signals for various vehicle movements. 2. Reverse Light: The reverse light automatically turns on when the driver shifts into reverse gear. It is a white, transparent light primarily used to alert vehicles behind that the car is reversing.
16
4
Share

What does 4T oil pressure mean?

4T oil refers to specialized engine oil designed for 4-stroke engines. Engine oils are categorized into 2-stroke and 4-stroke oils based on the engine's working cycle, with packaging marked as 2T or 4T oil accordingly. 4T oil is used in 4-stroke motorcycles and serves functions such as lubrication, heat dissipation, and cleaning. Relevant information about engine oil includes: 1. Introduction: Engine oil, also known as engine lubricant (English name: Engine-oil), with a density of approximately 0.91×10³ (kg/m³), provides lubrication and wear reduction, aids in cooling, seals against leaks, prevents rust and corrosion, and acts as a shock absorber. It is often referred to as the 'blood' of a vehicle. 2. Composition: Engine oil consists of base oil and additives. The base oil is the primary component, determining the oil's fundamental properties, while additives compensate for and enhance the base oil's performance, introducing new characteristics and playing a crucial role in the oil's overall effectiveness.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.