Can a Pure Electric Vehicle Keep the Air Conditioning Running After Shutting Down?

What is the ECU in a car?

ECU in a car is the Electronic Control Unit, a specialized microcomputer controller for automobiles, also known as the vehicle computer or onboard computer. The ECU can be considered one of the core electronic components in modern vehicles. The car's ECU functions like the human brain and is mostly installed under the dashboard on the driver's side or near the wiper linkage. The role of the ECU is to continuously monitor various input data (such as braking, gear shifting, etc.) and the vehicle's operating conditions (acceleration, skidding, fuel consumption, etc.). It calculates the information sent by various sensors according to pre-programmed procedures, processes it, and then sends the parameters to the relevant actuators to perform various predetermined control functions.

6

5

Share

What does it mean when the EPC light comes on?

The EPC indicator light has two states of illumination: during power-on self-test and under other circumstances. The power-on self-test is an indication that the vehicle is monitoring the status of all sensors before driving. Generally, if the vehicle is not started after power-on, the light will turn off by itself after about 3 seconds. In other cases, if the EPC light remains on or does not turn off for a long time after the vehicle is started, the main causes for the EPC light staying on include faults in the engine intake system, throttle valve issues, fuel system problems, engine malfunctions, ECU control unit failures, and brake light faults. Below is a detailed introduction to the reasons for the EPC light coming on under other circumstances: Engine intake system fault: The EPC light will alert when the engine intake is obstructed or insufficient. Throttle valve fault: Carbon buildup is a common issue with the throttle valve. Additionally, dirt on the main body can affect intake, causing the indicator light to illuminate. Fuel system fault: Examples include substandard fuel, deteriorated fuel, or poor fuel atomization. Engine fault: Insufficient engine pressure or issues with the intake valves and other power system components can also trigger the EPC light. ECU control unit fault: For instance, interference with the vehicle computer signals or false alarms from the vehicle computer. Brake light fault: Situations such as brake lights not working, faulty brake switches, or brake circuit issues. Solutions for when the EPC indicator light comes on: Troubleshoot intake system faults, use qualified fuel, clean the throttle valve body, etc. Remove carbon deposits from relevant parts, perform cleaning, etc. Rewrite ECU-related data (this is done when other faults have been resolved but the issue persists). Other faults cannot be ruled out. Specific repairs should be based on actual vehicle inspection results. When the vehicle starts its self-test, the EPC light will illuminate for a few seconds and then turn off. If a fault occurs, this light will stay on. Insufficient battery power can also cause the EPC fault light to come on. It is generally recommended to go to a 4S shop for inspection and maintenance.

15

1

Share

What type of engine oil is best for Toyota Camry?

Toyota Camry is suitable for using Toyota Genuine Engine Oil. Commonly available grades like 0W40, 5W30, and 5W40 have strong applicability. Engine oil is a crucial factor affecting engine performance and lifespan. High-quality oil not only lubricates but also cleans, seals, cushions, and dissipates heat within the engine. When selecting engine oil, it's essential to choose the right grade for your engine model. The oil viscosity shouldn't be too high or too low. If viscosity is too low, the oil can't form a stable oil film during engine operation, accelerating engine wear. If viscosity is too high, it increases resistance during operation, leading to reduced engine power and higher fuel consumption. Additionally, oil performance degrades over time, so vehicle owners must change the oil regularly.

19

5

Share

Should You Replace One or Both Rear Wheel Bearings When One Fails?

When a rear wheel bearing fails, replacing just the one is sufficient. Below are specific details regarding rear wheel bearings: Regular Inspection: To maximize safety and reliability, regardless of the vehicle's age, it's essential to frequently inspect the rear wheel bearings. Watch for early warning signs of wear, such as any friction noise during rotation or abnormal deceleration of the suspension assembly during turns. For rear-wheel-drive vehicles, it's recommended to lubricate the rear wheel bearings at 38,000 kilometers. When replacing the brake system, inspect the bearings and replace the oil seals. Noise Handling: If you hear noise coming from the bearing area, first identify the source of the noise. There are many moving parts that could potentially generate noise, or it might be due to contact between rotating and non-rotating components. If the noise is confirmed to be from the bearing, it may be damaged and require replacement.

15

5

Share

Is the 1.5T SUV's power sufficient for climbing hills?

1.5T SUVs may feel underpowered when climbing hills. Here are some related details about engine displacement: 1. Hill climbing: For frequent hill climbing, larger displacement or models above 2.0T are better. For regular roads, even a 1.3T model is sufficient, let alone a 1.5T SUV. So, it's not that 1.5T models are inadequate for hill climbing, but rather it depends on the type of hill. 2. Difference between 1.5T CVT and 1.5L CVT: Both use CVT continuously variable transmissions and have a 1.5 engine displacement, but the engine's intake methods differ, leading to variations in output power. The 1.5T employs a turbocharged engine, while the 1.5L uses a naturally aspirated engine.

18

2

Share

How to Perfectly Solve the Shaking Issue in the 7th Generation Honda Accord?

In most cases, the shaking phenomenon in the 7th generation Honda Accord is caused by poor combustion within the cylinders. The reasons and solutions for the Accord's shaking are as follows: 1. Steering Wheel Shaking: A car wheel is composed of a tire and a rim forming an integral unit. However, due to manufacturing reasons, the mass distribution of various parts of this unit cannot be perfectly uniform. When the car wheel rotates at high speed, it creates a dynamic imbalance, resulting in wheel shaking during driving. Solution: Adjust the dynamic balance. 2. Idle Shaking: The engine idle speed is preset in the ECU. When the RPM drops below a certain threshold, the car's computer automatically adjusts it. If the idle speed is too low and causes shaking, it indicates that it has exceeded the ECU's control range. Solution: Replace the thermostat.

20

4

Share

Can a Pure Electric Vehicle Keep the Air Conditioning Running After Shutting Down?

What is the ECU in a car?

What does it mean when the EPC light comes on?

What type of engine oil is best for Toyota Camry?

Should You Replace One or Both Rear Wheel Bearings When One Fails?

Is the 1.5T SUV's power sufficient for climbing hills?

How to Perfectly Solve the Shaking Issue in the 7th Generation Honda Accord?

Can the Fit use 5w30 engine oil?

What to Do When the Mercedes Run-Flat Indicator Stops Working?

Is it no longer necessary to display the annual vehicle inspection sticker for car insurance?

What to Do If a Mouse Gets into the Car Engine?