Can a Purchased Used Car Be Modified?

1 Answers
DiTalia
07/29/25 11:02pm
A purchased used car can be modified, but any vehicle modifications must be reported to and approved by the vehicle management department before proceeding. After the modifications are completed, they must be inspected and approved by the vehicle management department to ensure compliance. Once approved, the vehicle will pass future inspections without issues. Below are some considerations when purchasing a used car: 1. Check the electronic devices inside the car: Verify whether the electronic devices and buttons function properly, and test the sunroof's operation by opening and closing it multiple times. 2. Inspect the A-pillar for cracks to determine accident history: Look for any signs of welding on the A-pillar. While this method may seem straightforward, pulling off the rubber seals can make them difficult to reinstall properly, potentially damaging the interior panel clips or failing to restore them to their original position.
Was this review help?
18
4
Share
More Forum Discussions

Where to Register for a Driver's License?

You can register for a motor vehicle driver's qualification certificate through a driving school. If you haven't enrolled in a driving school and wish to register for the exam on your own, you can go to the local vehicle management office to register. Materials required for applying for a motor vehicle driver's license: the applicant's original and photocopy of ID card and household register. For non-locals, a photocopy of the temporary residence permit is also required. The applicant needs to provide one-inch bareheaded ID photos for use on the license after passing the exam. The process for obtaining a motor vehicle driver's license generally involves filling out an exam form, undergoing a physical examination, and after the vehicle management office accepts the application, the applicant pays the fee, attends the exam at the scheduled time, and upon passing, the vehicle management office issues the license. Physical requirements for obtaining a driver's license: Height: Applicants for large buses, tractors, city buses, large trucks, or trolleybuses must be at least 155 cm tall. Applicants for medium-sized buses must be at least 150 cm tall. Vision: Applicants for large buses, tractors, city buses, medium-sized buses, large trucks, trolleybuses, or trams must have uncorrected or corrected visual acuity of at least 5.0 on the logarithmic visual acuity chart. Applicants for other vehicle types must have uncorrected or corrected visual acuity of at least 4.9 on the logarithmic visual acuity chart.
6
0
Share

What Causes Cracks on the Side of a Tire?

Tire sidewall cracks can be caused by: 1. Natural aging: Prolonged exposure to wind and sunlight causes rubber to deteriorate over time, leading to natural cracking; 2. Impact damage: Frequent driving on rough or gravel roads inevitably subjects tires to impacts, which is normal as long as the damage isn't severe - the vehicle remains operational. When inflating tires, ensure they've cooled to normal temperature to avoid pressure measurement errors. Maintain inflation between 2.4-2.6 bar (35-38 psi), neither overinflating nor underinflating. Regularly inspect tire wear patterns and repair/replace when necessary.
8
0
Share

Are Snow Chains Allowed on Highways?

Snow chains are not allowed on highways. Their purpose is to be used when there is snow on the road to prevent traffic accidents. When snowy weather occurs, highways are usually closed. If the highway is not closed, there is typically no need to use snow chains, as using them under such conditions can pose traffic hazards. Additionally, snow chains should not be installed when the tire pressure is insufficient. Snow chains are generally made of steel or rubber and have anti-slip functions. Structurally, they can be divided into two types: pre-assembled cover-type chains and cross-installed individual chains. Snow chains come in size restrictions, suitable for different wheel hub sizes and tire widths, so it's important to choose chains that match your wheel dimensions.
2
5
Share

How to Replace Antifreeze in a Car?

Method for replacing antifreeze in a car: 1. Insert a rubber hose connected to a tap into the radiator filler port, turn on the tap to allow tap water to continuously flow through the engine cooling system, flushing out the remaining antifreeze. After cleaning, add new antifreeze. When adding antifreeze, monitor the level closely to avoid overfilling, which could affect driving safety. Precautions for adding antifreeze: 1. Do not mix different types of antifreeze, as this may cause sedimentation or other issues, reducing its effectiveness. 2. Do not add water to antifreeze: Adding water raises the freezing point of the antifreeze, reducing the engine's cooling performance and increasing the risk of overheating while driving.
8
3
Share

Does the Volkswagen Lavida have a radiator?

The Volkswagen Lavida has a radiator, which is located at the front end of the car's front bumper. The radiator of the Lavida is covered by the engine radiator guard, and the radiator cannot be filled with water. The water referred to here is the engine coolant, and the coolant filler port is located under the blue cap on the right side of the engine compartment. The body dimensions of the Volkswagen Lavida are 4670 mm in length, 1806 mm in width, and 1474 mm in height, with a wheelbase of 2688 mm. The Volkswagen Lavida is front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam non-independent suspension. The body structure is a unibody.
11
3
Share

Can a Hyundai Verna still be driven if one ignition coil is broken?

If one ignition coil of a Hyundai Verna is broken, it cannot be driven. The core components of the ignition system are the ignition coil and the switch device. Increasing the energy of the ignition coil allows the spark plug to generate a spark with sufficient energy, which is a basic requirement for the ignition system to adapt to the operation of modern engines. The Hyundai Verna has a body size of 4300mm in length, 1705mm in width, and 1460mm in height, with a wheelbase of 2570mm. The Hyundai Verna features front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam non-independent suspension, and the body structure is a unibody design.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.