Can a Private Car Pass the Annual Inspection After CNG Conversion?

1 Answers
WillowMarie
07/29/25 6:34pm
Vehicles are allowed to undergo CNG conversion, so they can pass the annual inspection. Here is relevant information: 1. Notes: If the CNG cylinder needs to be relocated for some reason, it is entirely possible because the service life of the cylinder is 15 years. Relocation requires a secondary inspection at a cylinder testing station. After obtaining a new vehicle gas cylinder usage registration certificate, the cylinder can be relocated and used normally in a new vehicle. 2. Relevant Procedures: Before vehicle modification, the owner must submit an application to the local motor vehicle administration department. After approval, fill out the vehicle modification application form, and then proceed to the designated CNG conversion company for modification. After the modification is completed, the vehicle modification certificate issued by the modification unit, along with the modification application form, must be submitted to the vehicle administration department to complete the motor vehicle modification registration procedures.
Was this review help?
15
0
Share
More Forum Discussions

How many points are deducted for not turning off the engine when getting out of the car in Subject 3?

Not turning off the engine when getting out of the car in Subject 3 will result in a deduction of 100 points. Below is an introduction to the Subject 3 exam techniques: 1. Follow the prompt instructions: Listen carefully to the voice broadcast instructions of Subject 3 and follow the prompts accordingly. Remember not to perform any operations before the voice broadcast ends; you must wait until the broadcast is complete before proceeding to the next step. 2. Pay attention to special areas: In many regions, the voice broadcast no longer reminds candidates of special areas such as school zones, bus stops, and crosswalks. However, candidates must perform corresponding deceleration or yielding operations based on the project signs and road markings. For school zones, apply the brakes within 10 meters of the project sign, keeping the speed below 30km/h. For bus stops, apply the brakes within 10 meters of the project sign, keeping the speed below 30km/h. For crosswalks, decelerate by applying the brakes within 30 meters before the crosswalk, and stop to yield if there are pedestrians crossing.
14
0
Share

How to Identify Front-Wheel Drive and Rear-Wheel Drive Vehicles?

Identifying front-wheel drive (FWD) and rear-wheel drive (RWD) vehicles can be done by: 1. Squatting down to check if there is a differential on the rear axle; 2. If there is no differential on the rear axle, it is a front-wheel drive vehicle; 3. If there is a differential on the rear axle, it could be a rear-wheel drive or four-wheel drive vehicle. If the front wheels have half-shafts, it is a four-wheel drive vehicle; if the front wheels do not have half-shafts, it is a rear-wheel drive vehicle. Characteristics of front-wheel drive include: 1. Reduced vehicle weight; 2. Increased interior space. Characteristics of rear-wheel drive include: 1. Improved vehicle balance and handling; 2. Easier maintenance; 3. Insufficient traction; 4. Power loss occurs as the engine's power is transmitted to the rear axle via the driveshaft.
3
0
Share

What are the tips for driving in a straight line in Subject 2?

The technique for driving in a straight line in Subject 2 is to master the steps. Extended information is as follows: 1. Steps for moving forward and backward: Forward: Press the brake → Release the handbrake → Press the clutch → Shift to 1st gear → Release the brake → Release the clutch → Half-clutch to control speed; Backward: Press the clutch → Press the brake → Shift to reverse gear → Release the brake → Release the clutch → Half-clutch to control speed → Align with the line using the rearview mirror → Press the clutch → Press the brake at the designated point → Shift to neutral → Pull the handbrake. 2. Purpose of driving in a straight line: Master the coordination between the clutch and the brake; Learn to control the steering wheel, look ahead, and develop good driving habits; Familiarize yourself with the shifting actions of 1st gear and reverse gear; Understand the function of the clutch pedal and master the 'half-clutch' driving method to skillfully control the vehicle's speed when moving forward or backward.
10
3
Share

Can the Golf GTI Outrun the CC?

Can the Golf GTI Outrun the CC? The Golf GTI can indeed outrun the CC, with the Volkswagen CC's acceleration performance lagging behind by 0.8 seconds, clearly at a disadvantage. Below are the relevant power specifications: 1. Golf GTI: Equipped with the third-generation EA888-2.0T engine, it delivers a maximum power of 220 horsepower (162 kW) at 4500-6200 rpm and a peak torque of 350 N·m at 1500-4400 rpm. It is paired with the same 7-speed wet dual-clutch transmission. 2. Volkswagen 2.0T: The turbocharged engine produces a maximum power of 200 horsepower at 5100-6000 rpm and a peak torque of 280 N·m at 1700-5000 rpm, mated to a 6-speed dual-clutch transmission.
7
3
Share

What is the size of the original tires on the Kia K4?

The size of the original tires on the Kia K4 is 215/50R17, where 215 indicates the tire width is 215mm, 50 represents the aspect ratio of 50%, R stands for radial tire, and 17 denotes a 17-inch rim diameter. The Kia K4 is positioned as a mid-size sedan, with its predecessor being the Kia K4. The dimensions of the currently available K4 models are 4720mm in length, 1815mm in width, and 1465mm in height, with a wheelbase of 2770mm. Its front fascia features Kia's signature tiger-nose grille design, adorned with vertical chrome accents. The lower air intake adopts an inverted trapezoidal design, compact yet refined, complemented by eagle-eye-style headlights on both sides, offering a strong sense of layering and high recognition.
17
4
Share

Will the right or wrong be displayed during the subject one exam?

During the subject one exam, the right or wrong will be displayed, but there will be no answer hints. Additional information is as follows: 1. Subject one exam: The total time is 45 minutes. The test paper consists of 100 questions, including true or false and multiple-choice questions, with a full score of 100 points and a passing score of 90. The test paper is randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations". The questions are randomly selected by the computer from the question bank to form a set of 100 questions. Candidates select answers based on the questions and click submit after completion, with no modifications allowed. If the answer is wrong, the computer will directly display the correct answer for the previous question when moving to the next question, but it will not show the correct answer. 2. Notes: If you answer 10 questions incorrectly (i.e., deduct 10 points), the computer will automatically prompt the end of the exam and will not allow further answers. Therefore, candidates must carefully check and repeatedly confirm their answers during the exam to ensure they select the correct answers before submitting.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.