···
Log in / Register

Can a pre-selected license plate number be canceled?

5 Answers
SanClara
07/29/2025, 11:37 AM

Pre-selected license plate numbers can be canceled. Here is relevant information about pre-selecting license plates: 1. New vehicle license plate selection methods: Selection at the vehicle management office, self-composed selection, and online selection. When selecting at the vehicle management office, you can get the license plate on the same day. Self-composed selection or online selection requires waiting for 15 working days to obtain the license plate. 2. Temporary license plate validity period: Before obtaining the metal license plate, the vehicle management office will issue a paper-printed temporary license plate. Temporary plates have a limited validity period, typically 7 or 15 days. When using temporary plates, one should be affixed to the upper right corner of the front windshield and another to the upper left corner of the rear windshield inside the vehicle.

Was this review help?
14
5
Share
LaAmara
08/14/2025, 05:23 AM

I had pre-selected a license plate number but later wanted a better one, so I went to the DMV to cancel the operation. It was quite simple—just log in online to cancel the reservation. If I had already paid, I might have to wait for a refund, but most places are free as long as I act before confirming the plate. Remember to bring my ID and reservation number. The staff handled it pretty quickly, taking about ten minutes. But don’t wait too long—if someone else picks the same number, it could be troublesome. I’ve had friends who waited a long time to get a new number, so cancellation is feasible, but it’s best to act early. No need to worry—it’s not difficult. For any questions, just call the official hotline for the most reliable advice.

Was this review help?
6
5
Share
Expand All
DeLucy
10/11/2025, 10:53 PM

I've done this several times. Honestly, it's entirely possible to cancel after pre-selecting a license plate number, but it depends on local DMV policies. Some cities allow free cancellation within a time limit, like 48 hours after selection. After that, a small handling fee may apply. Rules vary by region, so don't act blindly. In Beijing, I simply canceled online, while in a small southern city, I had to visit in person to submit application materials. Remember to check if the system hasn't locked your selection. Generally, just fill out a form and submit it. However, if the plate is already finalized, it becomes difficult. So think carefully before selecting. I recommend checking local government websites or apps for clear guidelines to avoid wasted effort.

Was this review help?
9
4
Share
Expand All
VanAthena
11/24/2025, 10:56 PM

Pre-selected license plate numbers can be canceled, and there are no technical obstacles. I have worked on relevant platforms where the system design grants users revocation rights. The operation path usually involves finding a cancellation option in the online account. If no payment has been made, the cancellation takes effect immediately. If payment has been made, the refund process is slightly slower, but most cities support it. The key factor is the application status—revocation is possible before the final submission of the license plate. Otherwise, you can only wait until the vehicle is scrapped or transferred. In practice, I have seen users easily cancel due to misclicks or other reasons. However, remember to act promptly to prevent the number from being released to someone else. Details may vary by region, but the core principle is feasible.

Was this review help?
9
4
Share
Expand All
OJessica
01/15/2026, 12:28 AM

Speaking as an ordinary car owner, canceling a preselected license plate number is absolutely doable. Last time I did it because I regretted choosing the wrong number—just a simple online process to get it done. But be aware that after cancellation, you might not be able to select the same number again or may have to wait for the next round. Some places also charge a small fee, but overall, the risk is minimal, so don’t worry too much. When I did it, the system automatically sent a confirmation email, which was quite convenient. Additionally, I recommend checking the latest regulations with the DMV because policies often change—for example, big cities tend to be more flexible, while smaller towns might be stricter. My experience is that the sooner you handle it, the better.

Was this review help?
16
2
Share
Expand All
More Forum Discussions

do car headlights dim over time

Yes, car headlights do dim over time. This is a normal and expected process known as lumen depreciation . The primary cause is the gradual degradation of the bulb's components and/or the headlight housing itself. The rate of dimming varies significantly depending on the type of bulb: traditional halogen bulbs dim slowly, High-Intensity Discharge (HID) bulbs experience more pronounced color shift and output loss, and while LEDs have an exceptionally long lifespan, their output also decreases minutely over thousands of hours. Environmental factors like UV exposure from the sun, which causes the polycarbonate lens to yellow and haze , severely reduce light output by scattering the beam. The most common factors contributing to dimming headlights include: Bulb Filament/Housing Degradation: In halogen bulbs, the tungsten filament slowly evaporates, darkening the bulb's glass and reducing light output. For HID and LED bulbs, the complex internal components and phosphors degrade over time. UV Hazing and Oxidation: The plastic headlight lenses are constantly exposed to sunlight. Ultraviolet (UV) radiation breaks down the surface, causing it to become cloudy or yellow. This hazy layer diffuses the light, making it much less effective. Environmental Wear: Road grime, dirt, salt, and minor abrasions from debris scratch the lens surface, further impeding light transmission. The following table compares the average lifespan and dimming characteristics of different headlight types: Headlight Type Average Lifespan Primary Dimming Cause Lumen Depreciation (Over Life) Notes Halogen 450 - 1,000 hours Tungsten filament evaporation, glass darkening Up to 20% Slow, gradual dimming; often replaced before severe dimming is noticed. HID (Xenon) 2,000 - 5,000 hours Electrode wear, phosphor degradation, color shift Can exceed 70% Output drops significantly and color often shifts to pink/blue towards end-of-life. LED 15,000 - 30,000 hours Semiconductor degradation, phosphor wear 20-30% (after 25,000+ hrs) Extremely long lifespan; dimming is barely perceptible for most of the bulb's life. Addressing dimming is crucial for safety. If you notice a significant drop in nighttime visibility, start by thoroughly cleaning the headlight lenses. If they are hazy, a restoration kit can often clear them up. If cleaning doesn't help, replacing the bulbs is the next step. For older vehicles with hazy lenses that cannot be cleared, replacing the entire headlight assembly is the most effective solution.
18
0
Share

can you use disinfectant in car

Yes, you can use disinfectant in your car, but it's critical to choose the right product and apply it correctly to avoid damaging your vehicle's interior. The safest approach is to use disinfectant wipes or sprays that are explicitly labeled as safe for automotive interiors. Harsh chemicals found in many household cleaners can cause permanent damage to your car's surfaces. The key risk involves the materials used inside your car. Volatile organic compounds (VOCs) in some disinfectants can break down and discolor materials like leather, vinyl, plastic, and fabric. They can also degrade the anti-glare coatings on touchscreens and dash displays. Safe Application Steps: Read Labels Carefully: Look for disinfectants approved by the EPA List N that are also safe for common surfaces. Isopropyl alcohol (at concentrations of 70% or less) is generally considered one of the safer disinfecting agents for car interiors. Test First: Always apply the disinfectant to a small, inconspicuous area (like the back of a seat or a hidden part of the door panel) and wait a few minutes to check for any adverse reaction. Wipe, Don't Soak: Use a lightly moistened wipe or soft cloth. Avoid oversaturating surfaces, as liquid can seep into electronics, switches, or seams, leading to mold or malfunctions. Ventilate: Keep windows open during and after cleaning to dissipate fumes and speed up drying. The following table compares common disinfectant types and their suitability for automotive use: Disinfectant Type Suitability for Car Interiors Key Considerations & Risks Isopropyl Alcohol (70%) Good Effective against germs; relatively safe on most hard surfaces. Can dry out leather over time. Hydrogen Peroxide (3%) Fair to Good Generally safe on hard, non-porous surfaces. May cause bleaching on colored fabrics or leather. Quaternary Ammonium Compounds Conditional Often found in commercial disinfectant wipes. Check label for material compatibility. Bleach-Based Cleaners Poor Highly likely to cause discoloration and damage to plastics, vinyl, and fabrics. Avoid. Ammonia-Based Cleaners Poor Can degrade and crack vinyl, leather, and plastics. Avoid on dashboards and screens. Vinegar Solutions Fair (Disinfecting) A natural option, but less effective as a disinfectant. Acidic nature can damage surfaces over time. For daily upkeep, focusing on high-touch points like the steering wheel, gear shift, and door handles with a safe product is more effective and less risky than a full interior disinfection. Proper technique is just as important as the product you choose to maintain a clean and well-preserved cabin.
4
0
Share

can you use a jet wash on a car

Yes, you can use a jet wash (also known as a pressure washer) on a car, but it must be done with caution and proper technique to avoid damaging the paint, trim, and seals. The key is to use a wider-angle nozzle, maintain a safe distance, and avoid focusing the high-pressure stream on sensitive areas. The primary risk comes from using too high a pressure or holding the nozzle too close to the vehicle's surface. This can force water past door and window seals, potentially damaging interior electronics. More commonly, it can chip paint or leave permanent swirl marks if the stream is directed at an angle that grinds dirt into the clear coat. The correct technique involves using a 40-degree fan nozzle or wider. Start by rinsing the car to loosen surface dirt. When applying soap, keep the wand at least 12-18 inches away from the paint, moving it continuously in straight lines. Always rinse from the top down, and be extra careful around areas like side mirrors, emblems, and sensors. Avoid directing the stream directly at seams, rubber trim, or the engine bay. For those focused on paint preservation, a foam cannon attachment is a great investment. It applies a thick, clinging layer of shampoo that gently lifts dirt away, minimizing the need for aggressive spraying. Here’s a quick guide to safe distances and pressures: Pressure Washer Setting / Nozzle Type Recommended Minimum Distance Potential Risk if Misused 40-degree (White) Fan Nozzle 12-18 inches Low risk of paint swirls if used correctly. 25-degree (Green) Nozzle 18-24 inches Moderate risk; can cause paint damage if held too close. 15-degree (Yellow) Nozzle Not Recommended High risk of instant paint chipping and clear coat damage. 0-degree (Red) Nozzle Never Use on Car Paint Will absolutely strip paint and damage surfaces. "Car Wash" Setting (if available) 10-14 inches Designed for safety, but still maintain distance. Ultimately, a jet wash is a highly efficient tool when used properly. It saves time and water compared to a standard hose. For a consistently pristine finish without risk, the two-bucket hand-wash method is superior, but for regular maintenance washes, a careful jet wash is perfectly acceptable.
17
5
Share

can you wash a car without soap

Yes, you can wash a car without soap, but it is not the best method for a thorough, safe clean. Using just water is better than leaving heavy dirt and grime on the paint, but it's essentially a heavy rinse that struggles to lift and encapsulate contaminants. For a proper wash that protects your car's clear coat, a dedicated car shampoo is highly recommended. The primary issue with a water-only wash is the lack of lubrication and cleaning agents. Soap creates a slippery layer that allows dirt particles to slide off the surface without scratching. Water alone lacks this lubricity, meaning you risk creating microscopic swirls and scratches as you wipe the dirt across the paint. This is especially true if the car is moderately dirty. For situations where soap isn't an option, there are better alternatives than plain water: Rinseless Wash Products: These are concentrated solutions (e.g., Optimum No Rinse, Wolfgang Uber Rinseless) that you mix with a few gallons of water in a bucket. They contain surfactants and polymers that loosen dirt and suspend it safely in the solution, providing the lubrication plain water lacks. This is the most effective and safest soap-free method. Waterless Wash Sprays: These are spray-on products designed for light dust or pollen. They contain lubricants and waxes to help lift dust safely with a microfiber towel. They are not suitable for a car that is actually dirty or muddy. The effectiveness of these methods largely depends on the level of dirt. The table below compares the risk of marring the paint (creating swirls and scratches) for different methods based on the vehicle's condition. Wash Method Light Dust/Pollen Moderate Road Grime Heavy Mud/Dirt Plain Water & Sponge High Risk Very High Risk Extreme Risk Rinseless Wash Solution Very Low Risk Low Risk Not Recommended Waterless Wash Spray Low Risk High Risk Not Recommended Traditional 2-Bucket Wash Lowest Risk Lowest Risk Lowest Risk Ultimately, while a quick rinse with water is better than nothing, investing in a proper rinseless wash product is the smartest way to get a safe, clean car without using traditional soap and a hose.
6
5
Share

can you use 4 car ramps at once

Using four car ramps at once is generally not recommended and can be unsafe for most DIY home mechanics. The primary risk is instability; ramps are designed to be used in pairs on a level, solid surface like concrete. Using two pairs on all four wheels can create a precarious situation if the vehicle shifts, as ramps lack the locking mechanisms of professional jack stands. For any work requiring you to go under the vehicle, jack stands are the only safe, professional-grade solution. The design of car ramps makes them susceptible to tipping or sliding if not perfectly aligned. Having all four wheels elevated simultaneously increases the chance of the vehicle rocking, which could dislodge a ramp. This is especially dangerous during tasks that involve applying force, like loosening a tight bolt. For simple tire rotations or brake work, it's safer to lift one end of the car at a time using a floor jack and secure it with jack stands, leaving the other two wheels firmly on the ground. Safety Concern Professional Alternative Ramp sliding on garage floor Use jack stands on a solid, level concrete surface Vehicle rocking off ramps Place wheel chocks behind the grounded wheels Plastic ramps cracking under prolonged load Choose heavy-duty steel jack stands rated for your vehicle's weight Uneven weight distribution causing tip-over Always use a floor jack at manufacturer-specified lift points Lack of a positive locking mechanism Jack stands feature a locking pin or ratchet for fail-safe support For ultimate safety, a combination of methods is best. You can drive the front wheels onto ramps for an oil change, but still place jack stands under the vehicle's frame as a backup. Never trust a jack or ramps alone with your life. The few minutes it takes to set up proper supports are worth the peace of mind.
13
0
Share

can you use etag in another car

No, you generally cannot legally or effectively use an ETag (or any electronic toll collection transponder) assigned to one car in a different vehicle. These devices are specifically linked to your vehicle's license plate and your tolling account for accurate billing and enforcement. Using a tag in an unregistered car can lead to violations, fines, or incorrect charges. The primary reason is the integrated enforcement system. Toll cameras capture your license plate as you pass through. If the plate number does not match the vehicle registered to the active ETag in your windshield, the system flags it as a potential violation. You might receive a fine in the mail instead of the discounted toll rate, even if you have a valid account. There are, however, official procedures for occasional use of a different vehicle. Most toll authorities allow you to add a second, temporary vehicle to your account online or via their app before your trip. This links the tag to the new plate for a set period. For frequent use of multiple cars, like in a household, the solution is to obtain additional tags from your toll agency, often for a small fee or deposit. Each tag will be registered to a specific vehicle on your account. Attempting to circumvent this system is not advisable. The potential hassle and cost of dealing with violation notices far outweigh the minor inconvenience of properly updating your account. The correct approach ensures you always benefit from your account's discounted rates and avoids any legal complications.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.