Can a newly purchased motorcycle be directly ridden to get licensed?

1 Answers
McErin
07/29/25 7:34pm
It cannot be directly ridden to get licensed because unlicensed motor vehicles are not allowed on the road. The motorcycle must be transported to the vehicle management office for inspection before licensing. Having a driver's license but no vehicle license plate, and without passing the inspection, does not mean the vehicle is qualified for road use. Below is relevant information: 1. Road Traffic Safety Law: According to Article 8 of the "Road Traffic Safety Law of the People's Republic of China," the state implements a registration system for motor vehicles. Motor vehicles can only be driven on the road after being registered by the traffic management department of the public security organ. For motor vehicles that have not yet been registered but need temporary road use, a temporary license must be obtained. 2. Motorcycle Annual Inspection: Motorcycles generally require annual inspections, with some requiring biennial inspections. "Road Traffic Safety Law Implementation Regulations": Article 16 states that motor vehicles must undergo safety technical inspections according to the following periods from the date of registration: annual inspections only check the vehicle's condition, insurance, driver's license, vehicle license, and the steel stamps of the frame and engine.
Was this review help?
2
3
Share
More Forum Discussions

How to check tire pressure on Volkswagen Passat?

Volkswagen Passat can only monitor and alert tire pressure, but does not have a tire pressure display function. Taking the 2020 Volkswagen Passat as an example, it belongs to the mid-size car category with body dimensions of: length 4933mm, width 1836mm, height 1469mm, wheelbase 2871mm, fuel tank capacity 68.5l, and curb weight 1470kg. The 2020 Volkswagen Passat features a front MacPherson strut independent suspension and rear multi-link independent suspension. It is equipped with a 1.4L turbocharged engine delivering maximum power of 150PS (110kW) and maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
16
2
Share

How to Check if the Car Battery Has Power?

Methods to check if the car battery has power are: 1. Observe the inspection window on the battery—green indicates normal, black means it needs charging, and white signifies damage; 2. Check the indicator window on the battery—blue or green color indicates normal, while white means no power; 3. Press the horn—a loud sound indicates power, while a weak sound suggests low power; 4. Observe the battery warning light on the dashboard—if it stays lit, it means the battery is out of power. Function of the battery: It stores electrical energy to supply power for car starting, ignition, lighting, signals, and audio-visual equipment. Working principle of the battery: Car batteries use lead-acid batteries based on the primary cell principle. When the load is connected, the lead on the negative plate reacts with sulfuric acid to form lead sulfate and lose electrons, while the lead oxide on the positive plate reacts with sulfuric acid to form lead and water, gaining electrons, thus generating electric current.
6
0
Share

At what distance should high beams be switched to low beams?

High beams should be switched to low beams when an oncoming vehicle is between 150 to 200 meters away. Relevant details are as follows: High beams: The intensity of the light is adjusted based on the distance of the filament. High beams focus the light parallel, emitting a concentrated and bright beam that can illuminate distant and high objects. Low beams, on the other hand, are positioned beyond the focal point (between 1x and 2x the focal distance), emitting a divergent light that covers a wider area at closer range. Difference between high and low beams: Both are used for nighttime illumination, but high beams have a higher angle and longer range, while low beams have a lower angle and shorter range.
17
5
Share

Is the Lynk & Co 02 a Three-Cylinder Engine?

The Lynk & Co 02 is equipped with a three-cylinder engine. The function of the engine is to convert the thermal energy of gasoline into mechanical energy by burning and expanding the gas in a sealed cylinder to push the piston and perform work. Taking the 2019 Lynk & Co 02 as an example, it belongs to the compact SUV category, with body dimensions of 4448mm in length, 1890mm in width, and 1528mm in height, a wheelbase of 2702mm, a fuel tank capacity of 50 liters, and a curb weight of 1535kg. The 2019 Lynk & Co 02 features a MacPherson independent front suspension and a multi-link independent rear suspension. It is powered by a 2.0T turbocharged engine with a maximum horsepower of 230PS, a maximum power of 169kW, and a maximum torque of 353Nm, paired with an 8-speed automatic transmission.
16
5
Share

What are the reasons for the VSC light coming on in the Reiz?

The reasons for the VSC light coming on in the Reiz are: 1. The vehicle stability control system is turned off; 2. There is a fault in the vehicle stability control system. Taking the 2013 Reiz as an example, it belongs to the mid-size car category, with body dimensions of: length 4750mm, width 1795mm, height 1450mm, wheelbase of 2850mm, fuel tank capacity of 70 liters, and curb weight of 1520kg. The 2013 Reiz features a front suspension of double-wishbone type and a rear suspension of multi-link independent type. It is equipped with a 2.5L naturally aspirated engine, delivering a maximum horsepower of 193PS, maximum power of 142kW, maximum torque of 236Nm, paired with a 6-speed automatic transmission.
2
4
Share

How to Turn On/Off the Parking Assist?

To turn the parking assist on or off, manually press the 'P' button near the gear lever. Functions of the parking assist: 1. Provides a more intuitive display of surrounding obstacles; 2. Eliminates troubles caused by parking, reversing, and starting the vehicle; 3. Assists the driver in eliminating blind spots or unclear vision defects, enhancing driving safety. Working principle of the parking assist: The ultrasonic detection signals emitted by the ultrasonic sensors embedded in the front and rear bumpers are reflected when encountering obstacles. After the sensors receive the reflected signals, they promptly feed them back to the system for distance calculation, alerting the driver through sound and video about the distance between the vehicle and obstacles beyond the field of vision.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.