Can a newly purchased car be driven on the road without license plates?

1 Answers
JessicaRose
07/30/25 1:06am
A newly purchased car cannot be driven on the road without license plates. Here are the precautions to take after buying a new car: 1. No driving without a license: You can buy a car without a driver's license, but you cannot drive the car on the road after purchase. Driving without a license is illegal. 2. License plate instructions: When registering a car after purchase, the driver's license will not be checked. After purchasing a new car, you will need your ID card, vehicle certificate, purchase invoice, tax payment certificate, insurance policy, etc. to register the car. At the vehicle management office, staff will inspect the vehicle and take photos. After the car is registered, the owner will receive the vehicle registration certificate and the vehicle license. 3. The vehicle license must be carried with the car: When driving, you need to carry both your driver's license and vehicle license. During the probationary period, you are not allowed to drive on highways.
Was this review help?
4
2
Share
More Forum Discussions

What is the minimum speed in second gear without accelerating?

The minimum speed at idle in second gear is approximately 15 km/h. Below is an introduction to gear shifting: 1. First to second gear: The permissible range for first gear is 0-20 km/h, shifting to second gear at 15-20 km/h. 2. Second to third gear: The permissible range for second gear is 10-30 km/h, shifting to third gear at 25-30 km/h. 3. Third to fourth gear: The permissible range for third gear is 20-40 km/h, shifting to fourth gear at 35-40 km/h. 4. Fourth to fifth gear: The permissible range for fourth gear is 30-50 km/h, shifting to fifth gear at 45-50 km/h.
15
3
Share

How to Deal with Porsche Engine Control Device Malfunction?

It should be the exhaust gas warning light. When this light stays on for a long time, it indicates a fault in the engine that reduces exhaust gas quality. The possible causes are either a damaged oxygen sensor or a faulty catalytic converter, and it should be checked and repaired promptly. Below is some relevant information: 1. Porsche Macan: The Porsche Macan is positioned below the Porsche Cayenne. The interior design of the Macan is very refined, featuring the distinctive Porsche family style and incorporating some elements from the Cayenne and Panamera models. 2. Powertrain: In terms of the powertrain system, the Porsche Macan is equipped with engines including a 2.0T, a 3.0T-V6, and a 3.6T-V6. The 2.0-liter turbocharged engine has a maximum output of 235 horsepower, the 3.0-liter V6 twin-turbocharged engine has a maximum output of 340 horsepower, and the 3.6-liter V6 twin-turbocharged engine has a maximum output of 395 horsepower.
4
0
Share

What is the highway range of the Xpeng G3?

The highway range of the Xpeng G3 is approximately 351 to 365 kilometers. Taking the Xpeng G3 2020 460 Yuexiang Edition as an example, its body dimensions are: length 4450mm, width 1820mm, height 1600mm, with a wheelbase of 2625mm, and a luggage compartment volume of 380 to 760 liters. The curb weight is 1609 kilograms. The Xpeng G3 2020 460 Yuexiang Edition is equipped with an electric single-speed transmission, with a maximum power of 145 kilowatts and a maximum torque of 300 Newton-meters. Its front suspension type is MacPherson independent suspension, and the rear suspension type is torsion beam non-independent suspension.
2
3
Share

Do Cars Come with Jumper Cables?

Cars do not come with jumper cables; owners need to purchase them separately. For general household vehicles, jumper cables with a diameter of 10mm or larger are recommended. Excessively long jumper cables can lead to power loss and affect the vehicle's startup, so a length of 3-4 meters is ideal. Below are the details about jump-starting: Jump-starting Method: First, open the engine hood by locating the switch under the steering wheel. Then, find the battery position under the hood and identify the positive and negative terminals. Connect the red cable to the positive terminal of the dead battery first, then to the positive terminal of the rescue vehicle's battery. Next, connect the negative terminal of the rescue vehicle to the negative terminal of the dead battery. After starting the rescue vehicle's engine, wait for the dead vehicle's engine to start, then remove the positive cable first, followed by the negative cable. Let the rescued vehicle's engine run for a while to ensure the battery gets sufficient charge. Jump-starting Precautions: Jumper cables are for emergency use when a vehicle fails to start. You can ask a passing car for help to jump-start your vehicle. The method involves connecting your car battery's positive terminal to another vehicle's positive terminal and the negative to negative, then starting your vehicle as an emergency measure.
14
2
Share

What does the second maintenance of a vehicle include?

Car second maintenance items include: 1. Engine: Three cleans and three filters, ensuring the engine starts easily, runs smoothly, meets exhaust standards, has no abnormal noises, and no leaks of water, oil, electricity, or gas; 2. Steering wheel: Light and flexible steering, with no wobbling or deviation of the front wheels during driving; 3. Clutch: Easy operation, complete separation, smooth engagement, no abnormal noises, and no oil leaks in the hydraulic system; 4. Transmission, drive, and front half-shaft: Good lubrication, reliable connection, easy gear shifting, and no oil leaks; 5. Brake pedal and service brake: Good braking performance, no deviation or oil leaks, and normal operation of the inertia proportioning valve.
17
5
Share

Are Car Body Bumper Strips Useful?

Car body bumper strips are useful. Car bumper strips are made of rubber or natural rubber materials and serve as external decorative accessories, typically installed at the corners of doors and front/rear bumpers. Bumper strips, also known as protective strips, anti-scratch strips, fender rubber strips, or side moldings, have the following functions: 1. Enhance the body lines and dynamic appearance, resist fading, and serve a decorative purpose; 2. Protect the car body sides from scratches or impacts by foreign objects; 3. Reduce the risk of door collisions due to their elastic properties. The materials used for car body bumper strips include: 1. Stainless steel plates; 2. Die-cast zinc; 3. Aluminum-based alloy steel plates; 4. ABS; 5. Polyvinyl chloride (PVC) and rubber.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.