Can a new car use S gear?

1 Answers
VonNorah
07/29/25 8:29pm
New cars should not use S gear. Below is a related introduction to the S gear in cars: Definition: In S gear (Sport mode), the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high RPM for a longer period. This allows the car to operate at lower gears with higher RPM for extended durations, resulting in greater torque output and acceleration. Advantages: Using S gear also has benefits for the vehicle. For cars frequently driven in congested urban areas, engine carbon buildup can be significant. Therefore, periodically using S gear appropriately helps remove carbon deposits from the engine, improves fuel economy, and extends engine lifespan.
Was this review help?
20
5
Share
More Forum Discussions

What Causes the Abnormal Noise When Starting the Haval H6?

It is mainly due to cold start. When the car has been parked for a day, the engine lubricant has almost entirely flowed back into the oil pan. During a cold start, the oil pump cannot immediately establish oil pressure or form an oil film between components, especially for the valves inside the cylinder head, which do not receive lubrication during a cold start. The relevant introduction of the Haval H6 is as follows: 1. Introduction One: The Haval H6 is a compact SUV equipped with two engines—a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine delivers 169 horsepower and a maximum torque of 285 Nm. This engine can output maximum power at 5000 to 5600 rpm and maximum torque at 1400 to 3000 rpm. It features CVVL technology, direct fuel injection, and an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 2. Introduction Two: The 2.0-liter turbocharged engine produces 224 horsepower and a maximum torque of 385 Nm. This engine can output maximum power at 5500 rpm and maximum torque at 1600 to 3600 rpm. It is equipped with DVVT technology, direct fuel injection, an aluminum alloy cylinder head, and a cast iron block. It is matched with a 7-speed dual-clutch transmission. 3. Introduction Three: The Haval H6 uses a MacPherson independent suspension at the front and a double-wishbone independent suspension at the rear. The double-wishbone suspension is an improvement over the double-wishbone independent suspension, which can reduce the body's roll amplitude, thereby enhancing the car's handling performance.
1
4
Share

What does mph mean on a Mercedes dashboard?

Speed unit in miles, 1MPH=1.609KM/HMILES. Commonly referred to as 'miles per hour'. mph is the abbreviation for mile per hour, a unit of speed measurement indicating miles/hour. It's colloquially called 'mile', where 1 mile = 1.609344 kilometers/hour. Here is some related information: 1. mph: km is widely known as kilometers, while mph is colloquially called 'mile'. Due to the late start of China's automotive industry, especially in the early days of the nation's founding, foreign cars dominated, most of which used miles per hour as the unit for speed and odometer readings. Abroad, it means 'mile'. 2. Mercedes: Mercedes generally refers to Mercedes-Benz. Mercedes-Benz is a world-renowned luxury car brand.
7
2
Share

How Often Should Volkswagen Spark Plugs Be Replaced?

Volkswagen's original spark plugs should generally be replaced every 20,000 to 30,000 kilometers under normal conditions. For iridium or platinum spark plugs, replacement can be extended to every 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the engine hood, lift the plastic cover of the engine, and remove the high-voltage distributor wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage distributor wires in the correct firing order, then secure the cover. Effects of faulty spark plugs: Damaged spark plugs can directly cause issues such as electrical leakage in the vehicle's ignition system, increased fuel consumption, and reduced power. The most significant problem is difficulty in ignition, which affects the vehicle's normal operation. Severe spark plug erosion—indicated by pitting, damage, or melted electrodes—means the spark plug is ruined and should be replaced. Symptoms of faulty spark plugs in a car: Damaged spark plugs may lead to the following issues: difficulty starting the engine, reduced power, excessive exhaust emissions, and increased fuel consumption.
14
4
Share

BMW X1: Should I Use 95 or 98 Octane Gasoline?

BMW X1 uses 95 octane gasoline, which is the recommended fuel grade in the vehicle's official user manual. In addition to checking the appropriate gasoline grade in the user manual, you can also find it marked on the fuel tank cap of the BMW X1. Typically, the fuel grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, those between 10.0-11.5 should use 95 octane, and if the compression ratio is higher, 98 octane is recommended. However, with the application of new technologies, the fuel grade can no longer be determined solely by the compression ratio. High compression ratio engines can also be tuned to use lower octane gasoline because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane number, the higher the octane value and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If you occasionally use the wrong gasoline grade in your BMW X1, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using a higher octane grade will not cause damage, but the increase in octane value can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces both the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles recommended to use higher octane gasoline, using a lower octane grade can cause engine knocking. The significantly lower octane value reduces the gasoline's ignition point, causing premature ignition during the compression stroke. If the fuel ignites before the spark plug fires during the compression stroke, resistance occurs in the upward stroke. This resistance makes the engine run very unstably. If the knocking is imperceptible, it only increases noise without obvious engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.
20
5
Share

How many seconds does the Emgrand GS take to accelerate from 0 to 100 km/h?

According to official data, the Geely Emgrand S takes 10.29 seconds to accelerate from 0 to 100 km/h. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, naturally resulting in faster acceleration. The Geely Emgrand S takes 10.29 seconds to accelerate from 0 to 100 km/h with a torque of 235 Nm, while the Haval H6 in the same class takes 9 seconds with a torque of 210 Nm. Transmission efficiency: The transmission serves as the medium for power delivery, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Geely Emgrand S is equipped with a CVT continuously variable transmission (simulating 8 gears). Power-to-weight ratio: The relationship between horsepower and vehicle weight is referred to as the power-to-weight ratio (unit: Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Geely Emgrand S takes 10.29 seconds to accelerate from 0 to 100 km/h with a power-to-weight ratio of 100 Hp/T, while the Haval H6 takes 9 seconds with the same power-to-weight ratio of 100 Hp/T. Powertrain: In terms of powertrain, in addition to the 1.4T turbocharged engine, the vehicle is also equipped with a 1.5T turbocharged engine and a 1.8L naturally aspirated engine. The 1.5L engine delivers a maximum power of 130 kW and a peak torque of 255 Nm. The 1.8L engine produces a maximum power of 98 kW and a peak torque of 170 Nm. The transmission options include a 6-speed dual-clutch, a 6-speed manual, and a 7-speed dual-clutch transmission.
6
5
Share

What Causes the Volkswagen Sunroof to Open Automatically?

Volkswagen sunroof may open automatically due to the following reasons: 1. Low battery voltage: Power interruption or insufficient voltage from the battery can affect the sunroof's initialization settings. This may cause the sunroof control unit to fail in recognizing the exact position of the sunroof, leading to misjudgment and incorrect operation. 2. The sunroof system is equipped with an automatic anti-pinch function. When encountering excessive resistance during movement (such as pinching a hand or other obstacles), the sunroof will automatically move in the opposite direction to prevent personal injury. Therefore, under certain circumstances, the sunroof may reverse its movement during the closing process.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.