Can a New Car Handle Long-Distance Trips?

1 Answers
StEvan
07/29/25 4:28pm
New cars can handle long-distance trips as long as you ensure the engine speed does not exceed 3000 RPM. Long-distance travel may involve various road conditions, and although speed limits differ on highways, national roads, and provincial roads, the maximum speed for a new car during the break-in period can be maintained at around 100 km/h. It is acceptable for a new car to undertake long-distance trips. Before setting off on a long journey, it is advisable to warm up the car. After prolonged parking, the engine oil flows back to the oil pan at the bottom of the engine, leaving the upper part of the engine without lubrication. It takes approximately 30 seconds after starting the engine for the oil pump to circulate the oil to critical components such as the pistons, connecting rods, and crankshaft. Even if you start driving immediately after starting the engine, as long as you avoid aggressive acceleration and maintain low RPMs, the car can still warm up effectively.
Was this review help?
6
1
Share
More Forum Discussions

Will the Lynk & Co 03's side mirrors be asymmetrical after folding?

Because the folding speeds on both sides are different, the engagement positions of the two mirrors may be misaligned. However, as long as they can fold normally, it won't cause any issues. Below is some relevant information about the Lynk & Co 03: 1. Introduction: The Lynk & Co 03 is the first sedan product under the Lynk & Co brand and the first sedan built on the CMA (Compact Modular Architecture) platform. It is a premium brand jointly established by Geely Holding Group, Geely Auto Group, and Volvo Cars. 2. Exterior: The Lynk & Co 03's 'Wind Hunting Design' integrates the brand's 'Urban Contrast Aesthetics' family design philosophy with aerodynamic elements, largely retaining the signature Lynk & Co design language. The front features split-type headlights, a horizontal front grille, and lower trim strips. The side profile maintains a traditional three-box sedan shape with smooth C-pillar lines, while the rear adopts 'L'-shaped taillights and a black decorative panel integrating reflectors.
9
5
Share

What does the yellow light on the car air conditioner mean?

The yellow light on the car air conditioner indicates that the air conditioner is in normal working condition. Here is the relevant introduction about car air conditioners: 1. Ventilation system: Its function is to ensure indoor ventilation while the car is moving, which means continuously introducing fresh air into the car interior and expelling air mixed with dust, carbon dioxide, and harmful gases from the engine. In cold winters, the fresh air should also be heated to maintain a suitable indoor temperature. 2. Heating system: Its function is to heat the air inside the car or the fresh air entering from outside to achieve the purposes of warming and dehumidifying. 3. Refrigeration system: Its function is to lower the temperature inside the car when the external environment temperature is high, making passengers feel cool and comfortable. 4. Air purification system: Its function is to filter the incoming air, continuously remove polluted gases from the car interior, and keep the air inside the car clean.
17
0
Share

Can 4S shops repair tires?

4S shops can repair tires. The tire maintenance methods are as follows: 1. Perform four-wheel alignment and tire rotation: Conduct four-wheel alignment and tire rotation every 10,000 kilometers. 2. Regularly check tire pressure: Tire maintenance also includes regularly checking the pressure. Tires with pressure exceeding the specified range will significantly reduce their service life, while tires with pressure below the specified range will lead to poor braking performance, difficulty or heaviness in steering, and also reduce the tire's service life. 3. Always pay attention to the tread wear indicators on the tires: The tread wear indicators are located in the main drainage grooves of the tire and are trapezoidal rubber protrusions. When the tire tread wears down to the level of the wear indicators, the tire must be replaced. During the rainy season, to prevent the vehicle from slipping on wet roads, the tire tread depth must be maintained above 3mm. 4. Regularly check the condition of the tires: Frequently inspect the tires to detect any bulges, cracks, cuts, punctures, aging of the valve rubber, or abnormal tire wear as early as possible. Pay special attention to checking the wear on the tire tread and the edges of the tire.
19
3
Share

What does the EPC light on in Q3 mean?

Here are the reasons why the EPC light is on in Q3: 1. A sign of a dirty throttle body. Remove and clean it, then rematch. If necessary, retrieve the fault code to troubleshoot the issue specifically. 2. Another reason is that the brake light is not working. Replace the bulb or check the brake switch and wiring. 3. There is also the issue of fuel quality. The EPC warning light may also illuminate. Main reasons why the car's EPC warning light comes on: 1. The EPC warning light staying on continuously indicates a fault in the engine management system or electronic control, often accompanied by unstable idling or engine cold start shaking. However, for domestic car owners, it is usually caused by the quality of domestic fuel and a dirty driving environment. Drive to a repair service station as soon as possible for inspection. In most cases, cleaning the throttle body can resolve the issue. 2. The EPC indicator light will illuminate when the ignition is turned on for a function check. If this indicator light comes on while driving, it indicates a fault in the engine power electronic control system. The engine must be checked immediately. Generally, a dirty throttle valve body, vacuum leaks in the intake system, a faulty brake switch, or an engine that has not been upgraded in time can all cause EPC faults.
8
1
Share

What is the displacement of the Land Cruiser V8?

The displacement of the Land Cruiser V8 is 4.6L. Here is some related information about car displacement: 1. Displacement and Cars: The space volume that the piston moves from the top dead center to the bottom dead center is called the cylinder displacement; if the engine has multiple cylinders, the sum of the working volumes of all cylinders is called the engine displacement. It is generally expressed in liters (L). Engine displacement is one of the most important structural parameters, which represents the size of the engine better than the bore and the number of cylinders. Many indicators of the engine are closely related to the displacement. 2. Displacement Classification: The classification of car levels in China is determined by the size of the displacement. The displacement of a micro car is less than or equal to 1.0L; the displacement of a compact car is in the range of 1.0-1.6L; the displacement of a mid-size car is in the range of 1.6-2.5L; the displacement of a mid-to-large car is in the range of 2.5-4.0L; and the displacement of a full-size car is greater than 4.0L.
1
5
Share

How to Connect Porsche Bluetooth?

Press the onboard navigation menu button on the steering wheel and select the Bluetooth phone option from the menu. Turn on your phone's Bluetooth to search for Bluetooth devices and connect to the car phone. Enter the Bluetooth device connection password on your phone. Once the car phone's Bluetooth is successfully activated, you can make calls.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.