Can a New Car Be Washed?

What to Do When the Cruze Temperature Gauge Shows Normal but the Radiator Boils Over?

Wait for the vehicle to cool down. Never replace the coolant when the engine is in a high-temperature state. Pour the coolant directly into the reservoir tank and stop filling when the liquid level reaches the upper limit MAX mark. Unscrew the drain plug and continue adding coolant. Once coolant continuously flows out from the drain plug, tighten the drain plug.

6

4

Share

Where is the B-pillar of a car located?

B-pillar is the position between the front door and the rear door of the vehicle. The main function of the B-pillar is to withstand the impact force from the side, fully ensuring the safety of the driver and passengers, while also playing a role in supporting the vehicle structure. It is an essential part of the entire car body. Here is some extended information: 1. It is not recommended to purchase vehicles with replaced B-pillars: It is not advisable to buy such vehicles. Although new parts have been replaced, the integrity of the car body has been compromised. In the event of an accident, the B-pillar will not be able to withstand the impact force from the vehicle, thereby posing certain risks to the driver and passengers inside. Vehicles with replaced B-pillars can be considered as major accident vehicles. 2. Models without B-pillars: BMW's i3 model adopts a design without a B-pillar. Such models must use coach doors (suicide doors). At the same time, the safety of the vehicle cannot be guaranteed, and the performance in vehicle crash tests is relatively poor, mainly because there is no supporting point on the side of the vehicle. From this perspective, the B-pillar cannot be omitted.

17

5

Share

How to Determine Brake Pad Thickness?

A new brake pad typically has a thickness of around 15mm, which gradually wears down with use due to friction. Professional technicians recommend that when visual inspection shows the brake pad thickness has reduced to approximately one-third of its original thickness (about 5mm), vehicle owners should increase self-inspection frequency and prepare for replacement. Additional information is as follows: 1. Classification: Brake pads are mainly divided into the following categories: metallic brake pads and carbon-ceramic brake pads. Metallic brake pads are further classified into low-metallic and semi-metallic brake pads, with ceramic brake pads falling under the low-metallic category. Carbon-ceramic brake pads are used in conjunction with carbon-ceramic brake discs. 2. Braking Principle: The working principle of braking primarily relies on friction, utilizing the friction between the brake pads and brake discs (or drums), as well as between the tires and the ground, to convert the kinetic energy of the moving vehicle into thermal energy through friction, thereby stopping the vehicle. An efficient and effective braking system must provide stable, sufficient, and controllable braking force, along with good hydraulic transmission and heat dissipation capabilities, to ensure that the force applied by the driver on the brake pedal is effectively transmitted to the master cylinder and slave cylinders, while avoiding hydraulic failure and brake fade caused by excessive heat.

7

5

Share

How to Enable Automatic Folding for CT6 Rearview Mirrors?

Press the left arrow button on the multifunction steering wheel repeatedly in short intervals; stop when the setup option appears on the instrument cluster menu interface. Click the right button on the steering wheel to enter the setup interface; after entering, select the rearview mirror tab. At this point, simply choose the automatic folding option to enable automatic mirror retraction when locking the car doors.

16

2

Share

What is the brake pad model for the Tiggo 3xe?

The brake pads used for the Tiggo 3xe are the ZOOM CPZ6204 model from ZOOM. Currently, ZOOM brake pads perform quite well, with their own brand manufacturers, independent R&D capabilities, production lines, and sales channels. However, there are also many OEM manufacturers, leading to uneven quality and severe polarization. Below are the instructions for brake pad usage: 1. Depending on different driving habits and usage conditions, the wear of brake pads varies. For the same car model, some may need replacement at 30,000 to 40,000 kilometers, while others, due to smoother road conditions and better driving techniques, may not require replacement even after over 100,000 kilometers, which is quite common. 2. The correct driving method is to stay fully alert at all times, be aware of the surroundings, and decelerate by easing off the throttle when anticipating problems, deciding whether to apply the brakes based on the situation. This approach not only saves fuel but also extends the lifespan of the brake pads. 3. When choosing to replace brake pads, opt for high-quality ones and try to select original equipment manufacturer (OEM) parts. Of course, OEM parts are guaranteed to have no quality issues.

13

3

Share

How is the horsepower of a truck calculated?

Horsepower equals torque multiplied by speed, symbolizing how much air-fuel mixture the engine can intake per unit time. Here is some related information about horsepower: 1. The origin of horsepower: "Horsepower" is a unit of power, commonly seen marked on diesel engines and steam turbines. Over 200 years ago, engineers manufactured the world's first batch of improved steam engines based on the design by British engineer James Watt. A brewery ordered one to replace horses in driving a water pump. The brewery owner wanted to determine whether the steam engine's productivity could match that of a horse. So he selected the strongest horse from his stable and had it work continuously for 8 hours. After conversion, it was concluded that a horse could lift 75 kilograms of water by 1 meter per second, i.e., 1 horsepower = 75 kilogram-force·meter/second. Since then, horsepower has been used as the power unit for mechanical engines and continues to be used today. 2. Metric horsepower: Metric horsepower, also known as PS (Pferdestärke), defines 1 metric horsepower as the work done to lift 75 kilogram-force·meter in 1 second. That is, 1 metric horsepower = 75 kilogram-force·meter/second = 735 watts.

16

4

Share

Can a New Car Be Washed?

What to Do When the Cruze Temperature Gauge Shows Normal but the Radiator Boils Over?

Where is the B-pillar of a car located?

How to Determine Brake Pad Thickness?

How to Enable Automatic Folding for CT6 Rearview Mirrors?

What is the brake pad model for the Tiggo 3xe?

How is the horsepower of a truck calculated?

How many driver's licenses can be deducted for one car?

How to Solve the Squeaking Noise from Car Doors?

Do Used Cars Still Require Purchase Tax?

Which gear to start with in a 12-speed transmission vehicle?