Can a Multimeter Measure the Quality of an Igniter?

What Are the Common Faults After a Transmission is Submerged in Water?

Common faults after a transmission is submerged in water include automatic transmission fluid deterioration, clutch damage, transmission slipping, and transmission oil leakage. Automatic Transmission Fluid Deterioration: Water entering the automatic transmission directly causes the transmission fluid to deteriorate and oxidize, reducing its friction coefficient. As a result, the vehicle components lack sufficient friction, leading to symptoms such as jerking, impact, and slipping in the automatic transmission. Clutch Damage: Water entering the automatic transmission not only damages the transmission fluid but is also highly detrimental to the clutch plates. If the clutch plates are submerged in water and cannot be repaired, replacement is the only option, which increases the corresponding repair costs. Transmission Slipping: During driving, if the engine revs up but the vehicle speed does not increase, accompanied by a feeling of overall weakness, this is often caused by burnt clutch plates. Water entering the transmission due to external factors, such as coolant mixing with oil or water entering through the transmission vent cap, can cause abnormal transmission operation. Transmission Oil Leakage: Oil seeping from the transmission housing or oil pan can be caused by aging seals leading to poor sealing or manufacturing defects resulting in pinholes in the housing.

6

4

Share

How Many Times Can You Take the Subject 2 Test?

You can take the Subject 2 test up to 5 times. Below is relevant information about Subject 2: 1. Introduction: Subject 2, also known as the small road test, is part of the motor vehicle driver's license examination. It refers to the field driving skills test. Starting from June 1, 2021, the "slope fixed-point parking and starting" item will be removed from the Subject 2 test for small automatic transmission vehicle driver's licenses; 2. Test Items: For large vehicles (A1, A2, A3, B1, B2), the test items include stake test, slope fixed-point parking and starting, parallel parking, passing single-plank bridge, curve driving, right-angle turning, passing width-limited gate, passing continuous obstacles, driving on undulating roads, narrow road U-turns, as well as simulated highway driving, continuous sharp bends on mountain roads, tunnels, rainy (foggy) weather, slippery roads, and emergency handling. For small vehicles (C1, C2), the test items include reversing into a garage, parallel parking, slope fixed-point parking and starting, right-angle turning, and curve driving.

13

3

Share

Do I need to display the 2021 motor vehicle inspection sticker?

In 2021, motor vehicle inspection stickers no longer need to be displayed. Since 2020, vehicles are not required to display any stickers. Starting from June 2020, China has implemented electronic inspection stickers nationwide. After passing the annual inspection, vehicle owners will not be issued paper inspection stickers. Instead, they can directly obtain the electronic inspection sticker through the 12123 traffic management app. 2021 Inspection Sticker New Regulations: The latest policy combines the vehicle annual inspection with the environmental protection inspection sticker. As long as the vehicle passes the annual inspection, there is no need to obtain a separate environmental protection sticker. Penalties for Not Displaying Inspection Stickers: According to Article 95 of the Road Traffic Safety Law of the People's Republic of China, driving a motor vehicle without displaying the inspection sticker will result in a fine and 1 penalty point. In serious cases, the traffic management department of the public security organ shall detain the vehicle and notify the party to provide the corresponding license, sticker, or complete the required procedures. Note that for vehicle owners who have obtained the electronic inspection sticker, it has the same effect as the paper sticker. When stopped by traffic police, presenting the electronic inspection sticker is sufficient.

16

2

Share

Can an A1 license drive a tractor-trailer?

According to the 'Regulations on the Application and Use of Motor Vehicle Driving Licenses': The A1 license category is for large passenger vehicles, and the permitted vehicle types are: A3, B1, B2, C1, C2, C3, C4, M. Therefore, it does not allow driving an A2 tractor-trailer. Additional information: 1. Detailed introduction to driving license categories: The Ministry of Public Security has subdivided the current three types of permitted driving categories, namely A (large passenger vehicles), B (large trucks), and C (small cars), into seven categories based on the driving difficulty and safety requirements of different vehicle types to further enhance targeted management. 2. Regulations stipulate: First-time applicants cannot directly apply for an A1 (large passenger vehicle) commercial driving license. The tractor-trailer category specifically requires an A2 license, which cannot be applied for initially. When applying for a motor vehicle driving license for the first time in a temporary residence, applicants can apply for a C-series motor vehicle driving license but cannot apply for a motorcycle license, nor can they add a motorcycle endorsement. 3. A1 license type permitted vehicles: Permitted vehicle type: Large passenger vehicles. License code: A1. Permitted vehicles and other permitted vehicle types: Large passenger vehicles A3, B1, B2, C1, C2, C3, C4, M.

12

5

Share

Are the license plates of court-auctioned vehicles transferred together?

Court-auctioned vehicle license plates are not transferred together. The vehicle can be transferred, but the license plate cannot. When transferring the vehicle, the vehicle management office will cancel the original license plate and vehicle registration certificate, and issue new ones to the transferee. Legality of motor vehicle license plate auctions: License plate auctions are illegal and lack legal basis. The "Automobile Industry Development Policy" promulgated by the National Development and Reform Commission also stipulates that no unit may impose any non-operational service fees on automobile consumers except for the fees stipulated by the state. Vehicle license plates are public resources, not government property, and taxpayers are the true owners of the plates. Auctioning public resources should require public consent and cannot exclude the public from decision-making. Article 19 of the "Regulations on the Registration of Motor Vehicles" stipulates that for transfer registration, the current owner of the motor vehicle shall fill out an application form, submit the vehicle for inspection, and provide the following documents and certificates: Identity proof of the current owner, proof and certificate of vehicle ownership transfer, vehicle registration certificate, vehicle registration license, for customs-supervised vehicles, the "Release Certificate of Customs-Supervised Vehicles" or customs-approved transfer certificate, and for vehicles exceeding the inspection validity period, the vehicle safety technical inspection certificate and compulsory traffic accident liability insurance certificate.

3

Share

What is the Function of a Roll Cage?

Roll cages are most widely used in racing cars and are a mandatory piece of equipment in official racing competitions. They serve two main purposes: protecting the driver's safety and enhancing the car body's strength and resistance to torsion. Protecting the Driver's Safety: Due to their reasonable geometric structure design, proper welding points, and qualified materials, roll cages maximize their sturdiness, ensuring the driver remains unharmed in the event of severe accidents such as rollovers. Enhancing Car Body Strength and Resistance to Torsion: In racing competitions, the car body is often stripped and fully welded to ensure its strength. The roll cage is typically welded to the car body, effectively absorbing impacts from the ground and preventing the frame from deforming. Roll cages are not suitable for family cars. However, many car modification enthusiasts install roll cages in their vehicles to achieve a cooler, more race-car-like appearance. Although they may look similar, the actual performance differs significantly. Professional manufacturing must consider welding points, angles, and materials, whereas most roll cages made by non-professionals fail to meet quality standards. In the event of an accident, these substandard roll cages can easily break, causing additional harm to the occupants.

18

3

Share

Can a Multimeter Measure the Quality of an Igniter?

What Are the Common Faults After a Transmission is Submerged in Water?

How Many Times Can You Take the Subject 2 Test?

Do I need to display the 2021 motor vehicle inspection sticker?

Can an A1 license drive a tractor-trailer?

Are the license plates of court-auctioned vehicles transferred together?

What is the Function of a Roll Cage?

What is the function of an automotive radiator?

What Does Car Idle Speed Mean?

How Often Should You Recharge the Refrigerant in a Car?

What are the six-seater car models available?