Can a Maybach be driven with a C1 driver's license?

2 Answers
Games
07/28/25 5:51pm
Oversized models are not allowed. If the length of a Maybach exceeds the 6-meter limit required for a C1 driver's license, it cannot be driven, such as the Maybach 62S. Maybach is a subsidiary product of Mercedes-Benz. The earliest Maybach was an independent brand. In 1919, Bach and his son Carl Maybach jointly created the legendary brand "Maybach" and began designing and manufacturing luxury cars. The following is an introduction to Maybach cars: 1. Car emblem: It consists of two crossed M's enclosed in a spherical triangle, with the two M's representing the abbreviations of Maybach and Manufaktur. 2. Car brands under Maybach: Maybach 57, Maybach 62, Maybach Zeppelin, Maybach Landaulet, Maybach Exelero.
Was this review help?
11
5
Share
DiFaith
08/11/25 11:50pm
As a new driver who just got a C1 license, I'm quite curious about this question. After checking the information, a C1 license allows driving small cars with fewer than 9 seats. Most Maybach models like the S-Class or GLS fall into this category, so there's no problem. However, it's necessary to check the specific vehicle manual—if it's an oversized or extended version with more seats, it might exceed the limit. When driving such luxury cars, beginners should familiarize themselves with the controls, avoid rushing to speed, and be aware that maintenance and insurance costs are quite high—don't strain your finances just for prestige. In short, it's fine to drive, but safety comes first. Take your time to adapt.
Was this review help?
13
0
Share
Expand All
More Forum Discussions

What is the difference between turning one and a half turns and turning to the lock?

The steering wheel's one full turn has a larger turning amplitude than half a turn. Here is some extended information about the steering wheel: 1. Introduction: A wheel-shaped device used to control the direction of cars, ships, airplanes, etc. This new design of the steering wheel emerged as the times required, introducing a gear system between the driver and the wheels that operates flexibly and effectively isolates severe vibrations from the road. 2. Function: The steering wheel is generally connected to the steering shaft via splines, and its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. Using a steering wheel with a larger diameter reduces the hand force required from the driver when turning. The steering intermediate shaft, as a connecting piece between the steering gear and the steering shaft, facilitates the standardization of the steering gear, compensates for errors during manufacturing and installation, and makes the installation of the steering gear and steering wheel on the vehicle more reasonable.
18
5
Share

What Causes a Car Roof to Leak?

It may be caused by a sunroof leak or failure of the car's waterproof sealant. Below is relevant information about sunroofs: 1. Functions of a Sunroof: It can rapidly cool down the car, eliminate fogging, and quickly exchange fresh air. Opening the sunroof while driving can swiftly increase the air circulation speed inside the car, thereby improving ventilation in the cabin. 2. Precautions for Sunroof Use: Open the sunroof in traffic jams to prevent exhaust fumes from entering the car. During traffic congestion, all vehicles are stationary, and exhaust fumes inevitably disperse in the air. Open the sunroof after exposure to sunlight to balance the interior temperature. In hot summers, after the car has been exposed to intense sunlight, the interior temperature becomes extremely high. At this time, the owner should promptly open the sunroof.
7
0
Share

Is the caf488wqe6 One of the Top Ten Globally?

caf488wqe6 is one of the top ten globally. Here is an introduction to the caf488wqe6: 1. Introduction: The caf488wqe6 engine originates from the UK and is an engine under the Ford company. 2. Engine: An engine is a machine that converts other forms of energy into mechanical energy, including transmission gear engines and rotating shafts, etc. The core part of the engine is the engine block, which forms the skeleton of the engine. The engine block must have sufficient strength and rigidity. It consists of the cylinder block, cylinder head, cylinder gasket, etc. The cylinder block is divided into general type, gantry type, and tunnel type. To properly cool the cylinder block, water cooling and air cooling methods are used. Water-cooled engines have cooling water jackets around the cylinders. The cooling water in the cylinder block and cylinder head is the same, continuously circulating within the water jacket to carry away some of the heat, thereby cooling the cylinders and cylinder head.
9
0
Share

What are the causes of CVT failure?

Here are the reasons for CVT failure: 1. Engine: Fluctuations in engine speed at idle, or engine stalling when shifting into gear. In this case, it is necessary to check the oil pressure of the forward clutch, the flow rate of the radiator, and the engagement and release oil pressure of the lock-up. If the measured oil pressure is too low, attention should be paid to the valve body and oil passages, such as using the vacuum test method to check the main pressure regulator valve hole in the valve body. If the oil pressure of the main chain wheel is too low, the main chain wheel control valve in the vacuum test should be checked. At this point, the valve body can be replaced or individual valve holes can be repaired, mainly depending on the cost. 2. Torque converter without lock-up: This is related to the lock-up oil circuit of the torque converter, and it is necessary to check the lock-up oil pressure and lock-up release oil pressure. 3. Hydraulic noise at idle: Check the release oil pressure of the torque converter lock-up clutch.
2
0
Share

Why Does the Car Dashboard Screen Flicker?

The reason for dashboard screen flickering is poor contact or malfunction in the circuit. More information about the dashboard is as follows: 1. Indicator lights: The most common indicator lights encountered while driving, such as light signal indicators, turn signal indicators, parking lights, etc., serve to indicate the status of various vehicle functions. 2. Warning lights: These have an alerting function, such as the fuel indicator light, door status indicator light, seat belt indicator light, etc. Generally, warning lights turn off after the driver performs the corresponding action. For example, the seat belt indicator light will turn off once the seat belt is fastened. 3. Fault indicator lights: The most important indicator lights, such as the generator fault indicator light, transmission fault indicator light, etc. These fault indicator lights rarely light up under normal circumstances, or they may light up briefly when starting the engine and then turn off. If a fault indicator light stays on continuously and is accompanied by a warning sound, it indicates that the vehicle has a malfunction or abnormality.
5
0
Share

What kind of oil is used for air pump compressors?

Air pump compressors use lubricating oil. Below is a partial introduction about engine oil: 1. Composition: Engine oil consists of base oil and additives. Base oil is the main component of lubricating oil, determining its basic properties, while additives are an important part of lubricating oil. 2. Types of engine oil: The winter oil grades classified by SAE lubricant viscosity are: 0W, 5W, 10W, 15W, etc. The symbol W stands for winter, and the smaller the number before W, the lower the low-temperature viscosity and the lower the applicable minimum temperature. The summer oil grades classified by SAE lubricant viscosity are: 20, 30, 40, 50, where the larger the number, the higher the viscosity and the higher the applicable maximum temperature. The all-season oil grades classified by SAE lubricant viscosity are: 5W-20, 5W-30, 5W-40, 5W-50, 10W-20, etc.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.