Can a Lost Vehicle Certificate of Conformity Be Replaced?

1 Answers
Valeria
07/30/25 6:06am
Yes, it can be replaced by contacting the 4S dealership where the vehicle was purchased. Below are the specific steps for replacement: 1. Go to the customer service department of the 4S dealership to file a record. The service department of the 4S dealership will then contact the manufacturer to arrange for the replacement. Provide the vehicle model information to the main factory, which will send a new certificate of conformity. The replacement fee for domestic vehicles is generally between 100-200 yuan. 2. After confirmation by the manufacturer, a new certificate of conformity will be issued. Once the certificate is received, carefully check whether the chassis number and engine number match those on the invoice. Special note: The certificate number may be different. If it differs, a new sales invoice will need to be issued. If the vehicle purchase tax has already been paid, a change procedure will need to be completed.
Was this review help?
2
3
Share
More Forum Discussions

What to do if the Audi A4L has difficulty starting after being parked for about an hour when hot?

Possible causes include fuel injector leakage or gasoline mixing with the engine oil. Alternatively, difficulty starting may be due to an overly rich air-fuel mixture caused by fuel injector leakage. It is recommended to remove the fuel injectors for a spray pattern test or replace them directly. Check if the oil is mixed with gasoline. The holding pressure of the fuel system should be 0.3 MPa. Install a fuel pressure gauge between the fuel pump and the high-pressure pump. After starting the engine and shutting it off, if the fuel pressure does not drop, it indicates no leakage in the switch. Check if the air filter element is clean and if the intake pipe is blocked. Verify if the carbon canister's electronic valve is functioning properly. After testing and replacement, if the fault persists, use a VAG1318 to check the fuel system's holding pressure. According to EISA's instructions, the oil pressure should be 0. Within 10 minutes after the engine is turned off, the pressure should remain at 3 MPa (3 Bar). If the pressure does not drop when the switch is closed, it indicates the low-pressure fuel system is functioning normally. If the pressure slowly drops after the switch is opened, it suggests a leak in the high-pressure system. Analysis indicates possible fuel injector leakage. After replacing all four fuel injectors, recheck the fuel pressure. A malfunctioning coolant temperature sensor is another common cause of cold start difficulties. If the sensor fails, the engine control unit may miscalculate, leading to reduced fuel injection and insufficient engine power, preventing the engine from reaching optimal operating conditions.
8
1
Share

Is the SVS light on the car dashboard serious?

At this time, the vehicle condition is quite serious. When the SVS light appears on the dashboard, it indicates a fault in the vehicle's engine. The driver should immediately stop the car in a safe manner and contact professional maintenance personnel for repairs. Here are the relevant details: Reasons for the SVS light to illuminate: The SVS light is similar to the engine fault light. When the SVS indicator lights up, it means the engine control unit has detected an error signal from a sensor or that the sensor has exceeded its standard operating parameters. When the ignition is turned on, the SVS light will illuminate briefly for an automatic check and then turn off after a few seconds, indicating that the vehicle is safe to drive. How to handle the SVS light: First, check if other vehicle systems are showing abnormalities, such as the coolant temperature gauge or oil pressure warning light. If only the SVS light is on and the engine can still start, drive cautiously, control your speed, and promptly take the vehicle to a repair shop for inspection. If symptoms such as increased combustion chamber temperature or the oil pressure warning light accompany the SVS light, continuing to drive may lead to accelerated engine wear and premature engine damage.
17
0
Share

The Process Steps of Vehicle Annual Inspection?

Vehicle annual inspection refers to the standard procedure that every motor vehicle must undergo each year for inspection. It is a mandatory test equivalent to a regular health check-up for vehicles, aimed at promptly eliminating serious safety hazards and minimizing the occurrence of traffic accidents. Emission Test: Before the emission test, a preliminary check is required to verify if the engine number matches the one on the vehicle license. Once the qualified emission test form is obtained, proceed to the window to pay and receive the emission compliance label. Check for Violations: At the inquiry window, collect and fill out the "Motor Vehicle Regular Inspection Registration Form." Staff will check if the vehicle has any violations. If no violations are found, the form will be stamped with "Verified, Ready for Inspection." Deposit Payment: Pay the deposit at the designated service counter, where you will also need to fill out and collect the inspection form. Exterior Inspection: The exterior check primarily involves examining the vehicle's lights for damage, ensuring the body appearance matches the original, and verifying there are no changes to the suspension. On-site Testing: If the exterior passes inspection, the vehicle can proceed to on-site testing, which mainly checks the brakes, headlights, and chassis. Final Review: Once all items pass inspection, go to the main inspection office in the hall to sign and stamp the documents, and then receive a refund of the deposit.
10
0
Share

Is it necessary to install a license plate bracket?

License plate brackets are necessary to install. Here is a detailed introduction to license plate brackets: Function: A license plate bracket is a frame for holding the license plate, also known as a license plate frame or license plate holder. There is one at the front and rear of the vehicle. It serves to secure the license plate, protect the license plate and the vehicle body, and prevent the license plate from damaging the body. Installing anti-theft screws on the license plate bracket can also provide anti-theft functionality. Compatibility: Some imported vehicles have license plate mounting holes that differ from those of domestic license plates. License plate brackets can also address compatibility issues with mounting license plates on imported vehicles.
14
2
Share

What is the service life of commercial vehicles?

Commercial vehicles have the following service life: The service life of small and micro rental passenger vehicles is 8 years, medium rental passenger vehicles is 10 years, and large rental passenger vehicles is 12 years; The service life of public transport passenger vehicles is 13 years, other small and micro commercial passenger vehicles is 10 years, and large and medium commercial passenger vehicles is 15 years; The service life of micro commercial trucks is 8 years, light and large commercial trucks is 10 years. Vehicle scrapping process: The owner of the vehicle applying for scrapping and renewal must fill out an "Application Form for Vehicle Modification, Transfer, Alteration, Suspension, or Scrapping" and affix the owner's seal. Apply at the registration acceptance counter, and for vehicles that have reached the scrapping age, a "Vehicle Scrapping Notice" will be issued. For vehicles that have not reached the scrapping age, if they meet the scrapping standards after inspection by the vehicle inspection counter, a "Vehicle Scrapping Notice" will be issued. The owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The owner must submit the "Modification Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the vehicle inspection counter for verification and signature. The license plates will be reclaimed, and the application will be submitted for approval according to regulations to complete the scrapping registration.
2
0
Share

Will Insurance Fully Cover a Vehicle Submerged While Stationary?

In the event of a vehicle being submerged, the vehicle damage insurance can cover parts of the vehicle damaged except for the engine. Damage to the engine caused by such an incident may only be covered by the additional water-related damage insurance. Water-related damage insurance, also known as engine special loss insurance, is an additional coverage purchased by the vehicle owner specifically for the engine. Here is some relevant information about vehicle damage insurance: 1. Definition: Vehicle damage insurance is a type of commercial auto insurance where the insurance company compensates within reasonable limits for damage to the insured vehicle caused by an accident while the vehicle is being used by the insured or an authorized driver. 2. Methods for determining coverage amount: The coverage amount for vehicle damage insurance can be determined based on the new vehicle purchase price, the actual value at the time of insurance purchase, or through negotiation between the policyholder and the insurance company.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.