Can a Haval car be locked without turning off the engine?

1 Answers
DeJoanna
07/30/25 3:44am
Haval car can be locked without turning off the engine. Lower the driver's window to the bottom and raise all other windows. After closing the door from the outside, press the lock button on the central control lock inside the car. This will lock all the doors. Precautions after turning off the engine: Before turning off the engine, always remember to turn off the air conditioning first. If you turn off the engine without turning off the air conditioning, the next time you start the car, the air conditioning will also start. However, if the engine is not warmed up, this will increase the engine's load, and prolonged operation under such conditions can cause engine problems. Preventing forgetting to turn off the engine when exiting the car: Before getting out of the car, check if the display screen has turned off and gone black. Also, check if the tachometer reads zero.
Was this review help?
7
3
Share
More Forum Discussions

How to Determine a Lack of Coolant?

Methods to determine a lack of coolant include observing the coolant warning light on the dashboard; checking the coolant reservoir; and inspecting the water level markings on the coolant overflow tank. Observe the coolant warning light on the dashboard. If it lights up, it is likely due to a lack of coolant, though it could also be caused by excessively high engine temperatures. Check the coolant reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving and promptly add coolant. Inspect the water level markings on the coolant overflow tank. The coolant level should normally be between the maximum and minimum marks. To determine if coolant is lacking, check the markings—if the coolant is below the minimum level, it indicates a shortage. Coolant replacement intervals: For vehicles that operate for extended periods, such as taxis, high-quality coolant should generally be replaced annually. For vehicles with shorter operating times, replacement can be done every two years or every 30,000 kilometers. To prevent excessive foaming, which reduces the heat exchange efficiency between the coolant and engine components, ensure the product is within its validity period when adding it. Long-life coolant can remain effective for up to three years. If suspended particles, sediment, or signs of deterioration or discoloration are observed in the coolant, replace it promptly and clean the system.
17
0
Share

What brand of tires does the original GAC Trumpchi GS3 use?

The original tires of the GAC Trumpchi GS3 are from the brands Atlas and Giti, with tread patterns GitiComfort-F50 and Batman-A51. Below are the specifications of GAC Trumpchi tires: 1. 215/60R17: Giti tire Giti215/60R17-96H Comfort series GitiComfort-SUV520. The 2021 GAC Trumpchi GS3 base model 235T manual Jingku version uses 17-inch tires. 2. 215/55R18: Giti tire Giti automobile tire 215/55R18-95V Comfort series GitiComfort-520V1. The 2021 GAC Trumpchi GS3 models 270T automatic Hongdong version, Xuandong version, Jinxiang version, and Jinzhi version use 18-inch tires.
14
0
Share

Why do some vehicle licenses not have an archive number?

Motor vehicle license archive numbers have been canceled, so there is no archive number on the vehicle license. The motor vehicle registration certificate number serves as proof that the owner's vehicle is recorded in the traffic police department's vehicle management office. The vehicle's data information should be reflected in the motor vehicle registration certificate. Currently, the archive number on the vehicle license has been canceled, and the license plate number is used as the query number. Below is some information about the motor vehicle registration certificate: 1. Replacement for loss of registration certificate: If the motor vehicle registration certificate is lost, missing, or damaged, the owner should apply for a replacement at the local vehicle management office where the vehicle is registered. 2. Motor vehicle services: The owner can authorize an agent to handle various motor vehicle registration and services, except for applying for a replacement of the motor vehicle registration certificate.
19
2
Share

What should the car coolant temperature be?

Engine temperature is typically monitored by a coolant temperature sensor, hence the normal operating temperature of the engine is often associated with coolant temperature. Generally, the optimal engine coolant temperature is 90°C, but it varies under different operating conditions. In a cold engine state, it may be around 85°C, while in a warmed-up state, the coolant temperature can exceed 100°C. However, 90°C is commonly regarded as the normal coolant temperature for an engine, though in actual driving conditions, it may fluctuate around this value. Below is relevant information: When the coolant temperature reaches 90°C, it indicates that the engine's heat generation has stabilized. Both excessively high and low coolant temperatures can damage the engine. Low temperatures are detrimental to engine lubrication, while high temperatures increase the risk of engine self-ignition. During daily driving, it is important to monitor the coolant temperature indicator on the dashboard. If the red warning light illuminates, do not continue driving; it is advisable to pull over and allow the engine to cool down.
20
5
Share

Can Part-Time 4WD Switch Modes?

Part-time 4WD systems can switch modes. Vehicles equipped with part-time 4WD systems have control levers or buttons inside the cabin that allow the driver to switch modes. Part-time 4WD systems generally have three modes: high-range 4WD mode, low-range 4WD mode, and high-range 2WD mode. Below is an introduction to the relevant content: 1. When driving on normal paved roads: high-range 4WD mode and high-range 2WD mode can be used. 2. When driving on some off-road trails: low-range 4WD mode can be used, which increases torque at the wheels. After switching to low-range 4WD mode, the vehicle's escape capability and off-road performance can be improved.
10
5
Share

What Engine Does the Honda CR-V Use?

Here are the details about the Honda CR-V engine: 1. The Honda CR-V is equipped with two engines: a 1.5T and a 2.0L. 2. The model numbers of these two engines are L15BL and LFA11, respectively. Below are the specifications of the L15BL and LFA11 engines: 1. L15BL engine: (1) Actual displacement is 1498ml, with 4 cylinders arranged in an L formation, and turbocharged intake. (2) Compression ratio is 10.3, with a DOHC valve train. (3) Maximum power is achieved at 5600 RPM. (4) Maximum torque is achieved at 5000 RPM. (5) Fuel supply is direct injection, and it is recommended to use 92-octane gasoline. (6) The 1.5T engine has a maximum output power of 142 kW. 2. LFA11 engine: (1) Actual displacement is 1993ml, with 4 cylinders arranged in an L formation, and naturally aspirated intake. (2) Compression ratio is 13, with a DOHC valve train. (3) Maximum power is achieved at 6200 RPM. (4) Maximum torque is achieved at 4000 RPM. (5) Fuel supply is multi-point injection, and it is recommended to use 92-octane gasoline. (6) The maximum output power is 158 kW, with a 0-100 km/h acceleration time of 9.3 seconds, and the MIIT-rated combined fuel consumption is 5L per 100 km.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.