···
Log in / Register

Can a four-month-old car be picked up?

4 Answers
LucasRose
07/24/25 2:36am
A four-month-old car can be picked up. Below are specific explanations regarding picking up a four-month-old car: 1. Definition of inventory cars: A four-month-old car is considered an inventory car. There is no absolute standard for inventory cars, but the general industry consensus is that domestically produced joint venture vehicles and self-owned brand vehicles that have been in stock for over three months or half a year can be called inventory cars. Imported vehicles, due to the time-consuming processes of transportation, customs declaration, and customs clearance, have a more lenient timeframe, usually being referred to as inventory cars if they have been in stock for over half a year or a year. 2. Considerations when purchasing an inventory car: Inventory duration. The production date of the vehicle can usually be found on the car's nameplate located on the side of the co-driver's seat or in the engine compartment. The time elapsed since the production date is the inventory duration. Assess the condition of the vehicle based on the length of the inventory duration. If components such as wipers, engine belts, and tires show no significant signs of aging, at least the storage environment is not too poor. If the inventory car is relatively dirty, it should be thoroughly cleaned before carefully inspecting the paint surface for scratches and dents. 3. Maintenance of inventory cars: Inventory cars still require some maintenance, which is not much different from new cars. It is best to take a test drive to confirm the car's condition.
Was this review help?
8
0
Share
Carson
08/10/25 9:40pm
Last year I ordered a new car, and the salesperson said the popular SUV might take two to three months, but I actually waited four months to get the keys. During that time, I frequently followed up with the salesperson, knowing that supply chain and chip shortages were causing slower factory scheduling and limited inventory for popular models, leading to repeated delays in the delivery date. Looking back now, planning and selecting a car several months in advance was a good idea, especially since electric or imported cars are more prone to delays. I recommend placing an order early and regularly checking with the dealer about the order progress to ease your mind.
Was this review help?
15
0
Share
Expand All
DeGabriela
09/24/25 4:18am
When dealing with customers at work, they often ask about delivery times. A four-month wait isn't uncommon, especially for popular or custom models. Production capacity can't always keep up with demand, and logistics often hit snags. We'll keep a close eye on the progress and notify you immediately with any updates. To shorten the wait, consider choosing models with available stock or shopping during promotional seasons, but for hot-selling vehicles, patience is key—though regular follow-ups don't hurt.
Was this review help?
15
0
Share
Expand All
DiMargaret
11/07/25 6:30am
From a supply chain perspective, waiting four months for car delivery is common with electric vehicles or new model launches. Post-pandemic chip shortages and transportation bottlenecks have slowed production. Standard models may take weeks, while high-end custom orders can drag on longer. Research brand production capacity reports, contact manufacturer customer service for updates—don't just wait passively. Placing orders during promotions sometimes helps secure earlier batches.
Was this review help?
17
3
Share
Expand All
More Forum Discussions

Do Motorcycles Have CVT?

Motorcycles do have CVT. How Motorcycle CVT Works: The CVT in motorcycles is a continuously variable transmission system, a type of transmission without gears. It relies on a centrifugal clutch and a drive belt to transmit power and control speed changes. Scooter motorcycles mostly use this transmission system. Advantages of Motorcycle CVT: In normal operation, a typical geared motorcycle requires at least the operation of the throttle, clutch, and gear lever. However, the CVT system used in scooter motorcycles eliminates the need for shifting gears. Only the throttle needs to be operated to drive the vehicle easily. Besides being simple and easy to use, the combination of the belt and the pulley also produces relatively low vibration, ensuring considerable comfort.
7
4
Share

Does Driving a New Car on the Highway Reduce Fuel Consumption?

Driving a new car on the highway can reduce fuel consumption. Factors that help reduce fuel consumption when driving on the highway: When a car is driven on the highway, the engine inevitably increases its RPM due to the higher speed. This helps burn off some carbon deposits that accumulated during low-speed driving when the engine RPM was too low. As a result, the engine is effectively cleaned, combustion becomes more efficient, and there is a slight improvement in power. Factors affecting car fuel consumption: The car's own technology has a significant impact on fuel consumption. Compared to cars from the last century, modern vehicles are much more fuel-efficient, highlighting the importance of automotive technology. Several key technologies influence fuel consumption, including engine performance, vehicle weight, transmission efficiency, and overall vehicle condition.
7
3
Share

What Causes Abnormal Noises When Refueling a Motorcycle?

This noise could be caused by unstable engine combustion or air leaks. Solutions: Check the air filter, intake pipe, secondary air injection system pipes, and carburetor mixture ratio for any abnormalities. Clean and adjust the carburetor, and inspect the spark plugs for issues. Motorcycle Refueling Precautions: Avoid refueling during hot midday hours in summer when temperatures are high. Gasoline is sold by volume rather than weight and is subject to thermal expansion and contraction. Refueling in the morning or evening allows for more mass per volume of gasoline, saving you money.
10
3
Share

What does displacement power 1975ml, 101kw mean?

Displacement is 1975ml = 1.975L (liters). 101kw is the engine power Meaning of displacement: The displacement of a car refers to the total capacity of all cylinders in the engine. For example, if a car engine has 4 cylinders, each with a capacity of 0.5 liters, then the engine displacement is 0.5 liters multiplied by 4 = 2.0 liters. Meaning of engine power: Engine power refers to how fast the engine does work. The work done by the engine per unit time is called the engine power. Relationship between displacement and engine power: Engine power generally depends mainly on the engine's displacement and speed. When the displacement is constant, the higher the engine speed and the larger the displacement, the greater the power.
2
5
Share

How to Replace Spark Plugs in the New Cruze?

Determine whether to replace the spark plugs ahead of schedule or shorten the manual standards based on the symptoms of spark plug failure. The spark plug is a crucial component of the gasoline engine's ignition system. It introduces high voltage into the combustion chamber and causes it to jump across the electrode gap to generate a spark, thereby igniting the combustible mixture in the cylinder. Under the effect of high voltage, the air between the spark plug's center electrode and the side electrode rapidly ionizes, forming positively charged ions and negatively charged free electrons. When the voltage between the electrodes reaches a certain level, the number of ions and electrons in the gas increases like an avalanche, causing the air to lose its insulating properties. A discharge channel forms in the gap, leading to a "breakdown" phenomenon. At this point, the gas becomes a luminous body, known as a "spark." Along with thermal expansion, a "crackling" sound is also produced. The temperature of this electric spark can reach as high as 2000-3000°C, sufficient to ignite the mixture in the cylinder's combustion chamber.
5
4
Share

Why is the interior light turned off while driving?

Driving with the interior light off is due to obstructed vision and physiological reasons. Obstructed vision: The fundamental reason for turning off the light at night is that when the outside light is dim and the interior light is on, a physical imaging phenomenon occurs. The darkness outside acts like the back of a mirror, while the bright interior light acts like the front of the mirror, turning the windshield into a full-fledged mirror. Driving under these conditions can easily lead to traffic accidents. Physiological reasons: The human pupil controls the amount of light entering the eye. In bright light, the pupil constricts to prevent too much light from entering. In dim light, the pupil dilates to allow more light in for better vision. During nighttime driving, the dark interior allows the pupil to dilate, improving road visibility. If the interior light is turned on, the light causes the pupil to constrict, thereby worsening visibility.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.