···
Log in / Register

Can a Flattened Front End of a Car Be Repaired?

4 Answers
AngelinaRose
08/26/25 4:31am

The repair of a flattened front end of a car depends on different situations: 1. It can be repaired if there are dents or cracks on the exterior; 2. It cannot be repaired if the structural components of the car body are deformed or damaged. Car maintenance items include: 1. Replace transmission oil; 2. Replace transmission oil filter; 3. Replace brake pads; 4. Replace belts, spark plugs, and engine oil; 5. Replace air filter; 6. Replace fuel filter; 7. Replace oil filter; 8. Replace cabin air filter. The benefits of car maintenance are: 1. Ensures the vehicle is in excellent performance condition; 2. Effectively improves vehicle efficiency and reduces wear on parts and tires; 3. Prevents sudden problems during driving, ensuring personal safety; 4. Enhances overall vehicle performance; 5. Reduces noise and environmental pollution.

Was this review help?
14
0
Share
IsaacLee
09/08/25 5:57am

I just went through this - my old car's front end got smashed in a collision, scared me to death. Immediately took it to a repair shop for inspection. They said repairability depends on damage severity. For minor dents, sheet metal work can fix it, costing around 2,000-3,000 yuan. But if it's severe - like frame bending or critical component damage (e.g. radiator), repair becomes expensive and unsafe, possibly requiring full part replacement or writing it off. Mine had moderate damage - the mechanic spent two days straightening the structure and replacing light housings, then conducted crash tests to confirm safety before clearing it for road use. Cost over 5,000 yuan, but still better than scrapping. Always drive attentively, avoid sudden braking. After an accident, don't hesitate - get professional diagnosis immediately. Never keep driving damaged vehicles to prevent further damage.

Was this review help?
9
5
Share
Expand All
AlexanderDella
10/22/25 6:01am

Last time my SUV's front end got smashed, I rushed to the 4S dealership for consultation. They said repairs depend on the situation: if it's just a deformed bumper, quick repairs will suffice; but for serious damage like a collapsed hood, new parts must be replaced, costing at least four to five thousand. During repairs, the frame and sensors need inspection to prevent issues like steering failure. I recommend new drivers involved in similar accidents to first report to insurance, as claims might help reduce the burden. After repairs, safety tests are necessary to ensure responsive brakes. My car has been running fine for a year post-repair—timely handling can restore normal vehicle use. Regularly check tire pressure to reduce skidding risks.

Was this review help?
6
0
Share
Expand All
SanSkylar
12/05/25 6:25am

If the front of the car is dented, it can usually be repaired—just take it to a repair shop. Don't try to fix it yourself; let the professionals assess the extent of the damage. Minor dents can be restored through metalworking, but severe damage, such as a bent frame, is more complicated and costly, requiring specialized equipment. After repairs, always test the safety performance to prevent accidents from recurring. Consider your budget and take photos to discuss possible insurance reimbursement with your provider. Addressing the issue promptly can minimize losses from downtime.

Was this review help?
15
3
Share
Expand All
More Forum Discussions

What does the car air conditioning sync mean?

Car air conditioning sync is the synchronization button for dual-zone automatic air conditioning. When the button light is on, the temperature of the air vents on both sides of the car is the same and adjusted synchronously. This means that when you adjust the temperature on one side, both air vents will actually have the same temperature. If you set different temperatures for the two sides, the sync function will automatically turn off. Dual-zone automatic air conditioning refers to a system with two temperature zones, meaning the left and right sides of the front cabin can be independently adjusted for temperature. Vehicles equipped with dual-zone automatic air conditioning can meet the different temperature requirements of passengers in two different positions inside the car, allowing for flexible adjustment between independent temperature zones.
19
2
Share

Where is the oil filter of Geely Auto located?

Geely Auto's oil filter is located in different positions for each model. For example, the oil filter of Geely Boyue is inside the black tank on the left side of the engine, while the oil filter of Geely Jingang is above the exhaust pipe at the rear of the engine. The oil filter, also known as the oil cleaner, functions to filter out impurities, colloids, and moisture from the engine oil, delivering clean oil to various lubrication points. Geely Auto is a domestic Chinese brand, and Geely Auto Group is a subsidiary of Zhejiang Geely Holding Group, headquartered in Hangzhou, Zhejiang, China. The brand's logo is inspired by the expanding universe, incorporating silver starlight, deep space gray, and earth blue, symbolizing Geely Auto's evolution from the blue sky and earth of its 3.0 era to the pursuit of the vast universe.
20
3
Share

Is Changan Engine Domestic or Joint Venture?

Changan engine is a domestic engine. For example, the Changan Eado uses a direct injection engine developed by Changan Automobile, called the BlueCore system. The BlueCore is a 1.6L naturally aspirated and 1.5T turbocharged direct injection engine. Its maximum power is 94KW, and the maximum torque is 168Nm. Moreover, its advantage is high torque at low speeds, achieving 140Nm torque at 2000 rpm, making it suitable for frequent start-stop conditions on Chinese urban roads. This engine is made of all-aluminum material. An aluminum engine weighs half as much as a cast-iron engine, and aluminum has good thermal conductivity, so it dissipates heat faster. Direct injection technology improves fuel atomization and combustion efficiency, resulting in stronger power, with a maximum power of 128 horsepower. Compared to multi-point electronic injection, the biggest advantage of direct injection is reduced fuel consumption. In its early stages, Changan Automobile mainly used the H-series engines. The H-series engines are inline 4-cylinder, 16-valve, all-aluminum engines. This series of engines has outstanding advantages such as high power, high torque, low emissions, and low fuel consumption. Equipped in Changan's main self-branded sedan models, these engines were put into production in 2010 and can meet the competition in the automotive market from 2010 to 2025.
3
0
Share

How Much Transmission Fluid Does the Axela Need?

The Axela requires 5L of transmission fluid. If a circulating replacement of the transmission fluid is performed, approximately 10L is needed. The replacement interval for transmission fluid is every two years or 40,000 kilometers. Transmission fluid refers to the lubricant that maintains the cleanliness of the gear system, protecting the transmission and extending the service life of the transmission components. The Axela refers to the Mazda 3 Axela, a vehicle produced by Changan Mazda, with dimensions of 4582mm in length, 1795mm in width, and 1458mm in height. The car features the MZD Connect Mazda infotainment system for the first time, built on an advanced human-machine interface that prioritizes driving safety, offering a technologically advanced and user-friendly driving experience.
2
2
Share

How many grams of refrigerant should be added to the 2008 Reiz?

2008 Reiz requires 500 grams of refrigerant. Below is relevant information about refrigerant: 1. Definition: Refrigerant is used in refrigeration and air conditioning systems to transfer heat energy and produce cooling effects. It serves as an intermediate substance in the refrigeration process, first absorbing the cooling capacity from the refrigerant to lower its temperature, and then cooling other materials that need to be cooled. This intermediate substance is called refrigerant or coolant. 2. Function: The primary purpose of refrigerant is to ensure that the refrigeration system operates safely, reliably, and economically within the specified temperature range, while also avoiding environmental pollution.
9
2
Share

Where to Go for Driver's License Physical Examination?

To apply for a driver's license, you need to undergo a physical examination at a county-level hospital or a military hospital at or above the regimental level. For the initial application of a motor vehicle driver's license, you should fill out the application form and submit the following documents: 1. Proof of identity of the applicant; 2. A medical certificate issued by a county-level or military hospital at or above the regimental level regarding the physical condition. For those applying for a special small automatic passenger vehicle for the disabled, a medical certificate issued by a specialized medical institution designated by the provincial health authority is required. The C1 driver's license physical examination includes tests for height, vision, color discrimination, hearing, upper limbs, lower limbs, torso, and neck.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.