Can a driver's license be processed online?

What does the association of brake switch A/B mean?

Brake switch A/B association means there is a quality issue with the brake switch itself. The related circuit of the brake switch is aging, has poor contact, or is short-circuited. Alternatively, the output appliance of the brake switch is aging or overloaded, such as the brake light bulb. Below is an introduction to the diagnosis and repair methods for the brake switch: 1. Diagnosis method: The brake light switch is installed on the bracket of the brake pedal, and its signal line is directly connected to the ABS/ASC/DSC control module. Damage or abnormal signal from the brake light switch can cause the ABS/ASC/DSC control function to fail, related warning lights to illuminate, and a decrease in vehicle power performance. 2. Repair method: Use a diagnostic tool to perform a self-diagnosis on the ABS/ASC/DSC control system to check if there are any fault codes related to the brake light switch. If such fault codes exist, inspect the brake light switch and its wiring, and replace the brake light switch if necessary.

10

0

Share

Can the owner apply for ETC without a driver's license?

The owner can apply for ETC without a driver's license. According to the "Implementation Plan for Accelerating the Application of Electronic Non-stop Toll Collection Service on Expressways" issued by the Ministry of Transport, the owner needs to provide the original valid ID card, the original and photocopy of the vehicle registration certificate, and the page of the registration certificate with the latest annual inspection seal. If applying on behalf of others, the original valid ID card of the agent is also required. For corporate applications, the handler's ID card or driver's license, the organization code certificate or business license of the company, and the official seal are needed. If applying for ETC through bank branches, a debit card or credit card from the corresponding bank is also required. Some banks only support ETC binding with credit cards, while others may require freezing a certain amount as a deposit when binding with debit cards. The principle of ETC deduction: There will be one or more ETC lanes on the expressway. Through the dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane of the toll station, the computer network technology is used to settle accounts with the bank in the background, achieving the purpose of paying tolls without stopping at the toll station. All this is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and environmentally friendly: Low-carbon, vehicles pass through the toll station without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduced wear and tear: Saves costs, reduces the frequency of vehicle starts and brakes, and lowers wear and fuel consumption; Improved efficiency: The efficiency of passing through ETC lanes can theoretically be increased by 2-3 times, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "Development Plan of Modern Comprehensive Transportation System for the 13th Five-Year Plan" that "by 2020, the interoperability of transportation cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased," and set the target of "reaching a 50% ETC usage rate for road passenger vehicles by 2020" in the main indicators of comprehensive transportation development during the 13th Five-Year Plan. More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the usage rate of ETC passenger vehicles, the future will also promote the use of ETC for trucks and explore the deep integration of the ETC system with smart transportation development directions such as vehicle-to-vehicle communication and vehicle-road coordination, providing comprehensive travel services for vehicle owners. This means more application scenarios will support ETC applications. Precautions for using ETC: The ETC transaction sensing area is 8 meters. When encountering a vehicle in front stopping, to prevent the ETC device failure of the front vehicle or the absence of an ETC device, keep a distance of more than 10 meters from the front vehicle to avoid automatic sensing and paying for the front vehicle. The recognition speed for passing through ETC lanes is 20km/h. If the speed is too fast, the vehicle device information cannot be read, leading to deduction failure. Unauthorized disassembly or movement of the OBU device, or detachment or loosening of the ETC electronic tag, will cause the electronic tag to fail. It can be sent to the bank where the ETC card was applied for or the highway service office for testing. If the loosening or detachment is not man-made, it only needs to be reactivated. When using a debit card bound to ETC, insufficient balance will also cause deduction failure. Follow the guidance of on-site staff to use the manual MTC lane and pass by cash or card. Excessive thickness of the car windshield may cause poor sensing. Especially for vehicles that have undergone accident repairs and had their windshields replaced, or those who have modified their front windshields, need to be cautious.

16

1

Share

What is the maximum wading depth of the Mercedes-Benz G63?

According to official specifications, the maximum wading depth of the Mercedes-Benz G63 is 700mm. It commonly features tire specifications of 295/40R22, a vehicle height of 1979mm, and is configured as a 5-door, 5-seat SUV. Maximum wading depth refers to the deepest water level a vehicle can safely pass through. Generally, sedans have a maximum wading depth not exceeding 300mm, while SUVs can handle slightly deeper water, though it's advisable not to exceed 500mm. Among common models, the GAC Trumpchi GS8 has a maximum wading depth of 700mm, the Audi A4 at 320mm, the Volkswagen Sagitar at 700mm, the Land Rover Range Rover at 900mm, the Jeep Compass at 800mm, and the Toyota Highlander at 455mm. SUVs typically exhibit higher wading depths compared to sedans. Generally, when driving through water, vehicle owners should take different measures based on water depth and vehicle characteristics, as detailed below: When water reaches the exhaust pipe level, the situation remains safe. Even if water enters the exhaust pipe, the internal pressure can expel it. As long as the engine isn't turned off in the water, backflow into the vehicle won't occur. When water reaches the door sill height, it becomes hazardous. Most electrical circuits, components, and sensors are located at the vehicle's base, risking circuit shorts that may damage critical electronics and prevent normal startup. When water reaches the air intake level, it's extremely dangerous. Driving directly into such conditions may cause immediate engine stalling, resulting in permanent engine damage or complete failure.

16

2

Share

What is the maximum wading depth of the Mercedes-Benz G63?

The maximum wading depth of the Mercedes-Benz G63 is 600mm. The wading depth of the Mercedes-Benz G63 is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Mercedes-Benz G63 is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the vehicle from automatically restarting after stalling in water, which could cause severe engine damage due to water ingress. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow it at a low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, use warning water level markers, trees, or the wheels and doors of other vehicles as reference points to judge the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, do not proceed and choose an alternative route instead.

15

1

Share

Where to Buy a Red Badge Civic?

The Red Badge Civic can be purchased from local parallel import car dealers. Here is a brief introduction to the Red Badge Civic: 1. Basic Information: The first Honda model in history to feature a red "H" badge was the "NSX-R." This car boasts performance comparable to Ferrari, making it a legend among Honda enthusiasts. Following the tremendous success of this model, Honda began applying the red badge to its performance-oriented models. 2. Powertrain: Although the Honda Civic Type-R may look similar to the standard Civic, its "inner workings" are entirely different. The Red Badge Civic is equipped with a K20C1 inline 4-cylinder "red top" engine. This 4-cylinder engine delivers a maximum power output of 235 kW, a top speed of 272 km/h, and can accelerate from 0 to 100 km/h in just 5.7 seconds.

10

2

Share

What is the trunk capacity of the Accord?

2018 Accord trunk dimensions: depth ranges from 1170-2100mm, width is 1400mm, and height is 550mm. The interior space design is quite regular, fully meeting the needs of daily household cargo carrying. However, the rear seats can only be folded down as a whole, which slightly compromises practicality. Here is some extended information: About the Accord: The Accord is Honda's embodiment of innovative spirit and globally leading technology, with a 38-year history worldwide. The original tires equipped on the Accord are Michelin's ultra-high-performance Pilot Super Sport tires. In September 2013, the first Chinese model featuring Honda's "Earth Dreams Technology"—the ninth-generation Accord by GAC Honda—made its debut.

11

3

Share

Can a driver's license be processed online?

What does the association of brake switch A/B mean?

Can the owner apply for ETC without a driver's license?

What is the maximum wading depth of the Mercedes-Benz G63?

What is the maximum wading depth of the Mercedes-Benz G63?

Where to Buy a Red Badge Civic?

What is the trunk capacity of the Accord?

Is there a grace period for vehicle inspection if it's overdue by a few days?

What does it mean when the ESC system needs to be checked?

How Often Should Power Steering Fluid Be Replaced?

Will Skoda Discontinue Production?