Can a Dead Car Battery Be Charged Directly in the Vehicle?

2 Answers
DelGrant
07/28/25 11:20pm
Yes, a dead car battery can be charged directly in the vehicle. The charging methods for a car battery are as follows: 1. For a fully automatic charger, connect the positive terminal to the battery's positive terminal and the negative terminal to the battery's negative terminal. Once connected, you can start charging. 2. For a manual charger, after connecting, set the charging voltage to the 12V setting and adjust the current to the 3 to 5 setting. A charging current of 4 to 6 amps is sufficient for charging. The reasons for a dead car battery include: 1. The vehicle has been parked for an extended period; 2. The car battery has reached the end of its lifespan; 3. Engine damage; 4. Insufficient battery electrolyte; 5. Corrosion of the battery terminals. The maintenance methods for a car battery are: 1. Avoid overusing the battery; 2. Regularly clean the positive and negative terminals of the battery; 3. Periodically check the vent holes on the cover of non-maintenance-free batteries to prevent clogging; 4. Avoid low battery water levels.
Was this review help?
13
1
Share
SanEsther
08/12/25 3:44am
I'm an experienced driver with over a decade behind the wheel and have encountered dead batteries multiple times. It's entirely possible to charge directly in the vehicle - I've done it myself. Just connect a charger to the positive and negative terminals, but never start the engine to charge as it may overcharge and damage the circuits. Always check that the wires are intact to prevent short circuits and sparks. Keep the garage well-ventilated since batteries may release gases during charging, posing safety risks. I regularly check my battery voltage as proper maintenance prevents problems, ensuring peace of mind and safety.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

Why is the car lock symbol flashing on the Corolla dashboard?

The reason why the car lock symbol on the Corolla dashboard keeps flashing is that the anti-theft system is active. When the car doors are locked, the vehicle automatically enters anti-theft mode, at which time the key light will flash continuously. The engine's anti-theft system consists of an electronic chip embedded inside the car key. Each chip has a fixed ID, and the car can only start when the key chip's ID matches the engine's ID. If they don't match, the car will immediately cut off power automatically, preventing the engine from starting. When the car is left unlocked, the electronic anti-theft system enters sleep mode, and the warning light flashes once every 5 seconds. If the light is off, it means the anti-theft system is not functioning and has failed to enter the working state. In this case, you need to check the display settings to find the remote lock mode setting and enable the horn with light flashing when locking.
5
5
Share

What Causes the Inaccurate Fuel Gauge in Cruze?

The main reason for the inaccurate fuel gauge in Cruze is an issue with the fuel level sensor. Below are the reasons for an inaccurate fuel gauge: 1. Fuel gauge needle fluctuates in speed This is a common occurrence, typically manifested as the fuel gauge needle dropping slowly in the first half of the gauge, then rapidly declining after passing the midpoint. However, the fluctuating speed of the fuel gauge needle cannot be considered a malfunction. This is related to the design of the fuel pump used to reflect fuel levels, which cannot uniformly indicate gasoline consumption. Achieving such uniform changes is difficult, and it cannot be altered through repairs or part replacements. 2. Fuel gauge suddenly drops to zero: The fuel gauge's indication depends on the fuel level sensor. When this happens, it indicates a problem with the vehicle's fuel level sensor. It is likely that the fuel level sensor has become contaminated and not cleaned promptly. It's important to note that gasoline contains many impurities, and the fuel level sensor, constantly submerged in it, can become polluted over time, directly affecting the accuracy of the readings. 3. Fuel gauge readings increase: This situation occurs because the linkage between the fuel level sensor and the float gets stuck, preventing the float from moving up and down normally. As a result, the fuel level sensor does not change, causing the fuel gauge needle to remain fixed at a certain position.
2
0
Share

Is a Claim of Over 10,000 Yuan Considered a Major Accident for a Car?

Whether a car claim of over 10,000 yuan is considered significant depends on the type of insurance involved. For example, in auto damage insurance or property insurance, 10,000 yuan would be considered a large amount. However, in life insurance, 10,000 yuan would not be considered substantial. Below is more relevant information: 1. Follow-up procedures after a car claim: After a car accident, the policyholder should immediately report the incident to the traffic management authorities at the scene and promptly notify the insurance company. If the insured vehicle is stolen, robbed, or seized, the policyholder should report to the local public security department and the insurance company without delay and issue a public notice. 2. Premium payments to the insurance company: No claims: 20% discount in the second year, no claims in the second year, 30% discount in the third year. 1 to 2 claims: The discount for the following year remains unchanged, meaning a 30% discount stays at 30%, and a 20% discount stays at 20%. 3 claims: The following year's premium is paid without any discount. 4 claims: The following year's premium increases by 10%. 5 claims: The premium increases by 50%. More than 5 claims: The insurance company may refuse coverage.
19
3
Share

Is It Serious to Scrape the Tire When Parking by the Side?

Scraping the tire when parking by the side is serious. It causes significant damage to the tire, as the sidewall is the thinnest part and may suffer catastrophic harm, leading to bulges or ruptures. Once the tire sidewall bulges, even if it hasn't ruptured, it must be replaced immediately; otherwise, it poses a high risk of blowout, threatening safety. Tires are one of the most critical components of a vehicle, so special attention must be paid to their maintenance: 1. Maintain distance: Keep a safe distance when driving at high speeds to avoid unnecessary or frequent braking, reducing tire wear. Also, for safety, monitor the tread depth; tires with nearly worn-out treads have reduced friction with the road, leading to longer braking distances—avoid high-speed driving with such tires. 2. Proper loading: There is a direct relationship between tire load and pressure. Overloading is similar to underinflation and can cause tire damage. Frequent overloading reduces tire lifespan by 20%-50%. Incorrect loading methods can also lead to uneven tire wear, causing some tires to bear excessive loads and shorten their lifespan. 3. Ensure proper pressure: Tire pressure is vital. The inflation pressure must comply with national standards for different types and specifications of tires. Regularly check tire pressure; both overinflation and underinflation can cause irregular wear, tread groove cracking, cord breakage, ply separation, and tire blowouts. For sustained high-speed driving, increase the pressure by 5%-10% above the standard. Note that tire pressure rises with temperature after driving—do not release air in this case. 4. Tire rotation: Rotate tires appropriately and timely (check during vehicle primary and secondary maintenance) to ensure even wear and extend lifespan. Install slightly larger-diameter tires on the outer wheels. 5. Tire selection: Avoid using retreaded tires on the front wheels. Prefer tires with vertical tread patterns for the front wheels and horizontal tread patterns for the rear wheels.
20
4
Share

Where is the Lexus rearview mirror heating button located?

The Lexus rearview mirror heating button is located on the center control panel, above the hazard light button, and features an icon with three upward-pointing wavy arrows. Press this button to activate the rearview mirror heating function. Rearview mirror heating is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the mirror surface, gradually removing rain or fog from the mirror. This eliminates the need for drivers to manually wipe the mirrors frequently, thereby reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. No manual angle adjustment is required, as the driver's side has a dedicated adjustment button. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius. The heat is then distributed across the left and right rearview mirrors. As the temperature rises and evaporates, water droplets on the mirror surface gradually shrink, and fog slowly disappears, effectively defogging and deicing the mirror. However, if the rain is particularly heavy, the effect may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves adding electric heating wires to the mirrors, which consume a significant amount of power. When using this function, ensure the car is running. Avoid activating the rearview mirror heating while the car is stationary to prevent draining the battery and potentially leaving insufficient power to start the car. Other methods for defogging rearview mirrors include: Opening windows for air circulation: Slightly open the side windows to allow air exchange between the inside and outside of the car. This reduces the temperature difference, causing the fog to gradually disappear. Using the car's air conditioning: Adjust the air conditioning to the appropriate setting to blow warm air, which helps remove fog.
18
2
Share

What are the contents of the vehicle maintenance schedule?

Common maintenance items include: engine oil, oil filter, fuel filter, air filter, and cabin air filter. Below is an introduction to vehicle maintenance schedules: 1. Each vehicle comes with: Automakers provide a "Vehicle Periodic Maintenance Schedule" with every new vehicle. Maintenance items and intervals are typically determined by mileage, aiming to achieve optimal performance and extend the vehicle's service life through regular maintenance. 2. Variations among manufacturers: Different automakers and models may have different maintenance items and intervals. Therefore, it's essential to follow the accompanying maintenance schedule for your specific vehicle when performing upkeep.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.