Can a Dash Cam See Outside the Car?

2 Answers
McKyle
07/24/25 5:48am
Can a Dash Cam See Outside the Car? A dash cam can see outside the car. Here is some relevant information about dash cams: Concept: A dash cam is a device that records images, sounds, and other related information during vehicle travel. After installation, it can record the entire process of driving, including video images and sounds, providing evidence in case of traffic accidents. Key Points for Purchase: When purchasing, it's necessary to analyze product parameters, including the recording angle, video resolution, compression format, cache, whether recording can be manually turned off, emergency recording, whether it interferes with other automotive electronic products, and whether it comes with a memory card.
Was this review help?
19
0
Share
MadelineRose
08/11/25 1:31am
The design of a dash cam is specifically for capturing the exterior view of the vehicle. It is typically installed on the interior side of the windshield or near the rearview mirror, using a wide-angle lens to record the road ahead. Some high-end models can even cover side and rear views. I often enjoy researching these devices while driving. Standard dash cams usually have a lens angle of 120 degrees or more, with high-definition footage that clearly captures license plates and traffic light changes. In rainy weather or at night, infrared lights help enhance brightness, but improper installation may result in missing critical details. When choosing one, it's recommended to opt for models with loop recording to avoid manual file storage, and ensure the battery life is sufficient for daily use to prevent power loss mid-drive. Regularly checking the lens cleanliness and stability is crucial—otherwise, blurry footage can be a real hassle, as video evidence is often the most reliable way to resolve disputes on the road. After years of driving, a good dash cam feels like an extra pair of eyes for safety—practical and affordable.
Was this review help?
1
4
Share
Expand All
More Forum Discussions

What are the perfect repair methods for rusted and rotten side skirts?

For perfect repair of rusted and rotten side skirts, use touch-up paint or go to a 4S shop for polishing and welding depending on the situation. Not serious: If the rust is not very serious, it can be solved with touch-up paint. Use ultra-fine water sandpaper with water to polish in the same direction until the rust is removed. After cleaning, apply primer, wait for it to dry, then sand it with water sandpaper, and finally apply the small can of original paint that came with the car. This counts as rust prevention treatment. Serious: If the rust is severe, it is necessary to go to a 4S shop for repolishing and welding. During the sheet metal repair process of the side skirt, high-temperature welding is required, which will damage the anti-corrosion layer of the original car sheet metal. After sheet metal repair, rust-proof wax can be used for internal rust prevention.
15
3
Share

How to Reset the Sunroof of Volvo XC60?

Here are the specific methods to reset the sunroof of Volvo XC60: 1. Component Aging: Press the sunroof switch button and observe the movement track of the sunroof. Check if there is any obvious up-and-down fluctuation. If so, it is likely due to component aging, and the only solution is to replace the components. 2. Presence of Debris Particles: After prolonged use, it is inevitable for some debris particles to accumulate on the sliding track. When the sunroof moves along the track, it rubs against these particles, causing abnormal noises. Open the lubricant and apply it to both sides of the sunroof's sliding track. 3. Loose Screws: Loose screws can lead to abnormal noises from the roof and the sunroof, and even pose a risk of the sunroof falling off. Simply tighten the sunroof screws to resolve this issue.
6
2
Share

What does maximum engine torque mean?

Engine maximum torque is related to the design of the engine's intake system, fuel supply system, and ignition system. At a certain speed, when these systems' performance is optimally matched, maximum torque can be achieved, usually within the engine's medium to low-speed range. As speed increases, torque tends to decrease. Below is a related introduction: 1. Definition of automobile torque: It refers to the moment output from the crankshaft end of the engine; under fixed power conditions, it has an inverse relationship with engine speed—the faster the speed, the smaller the torque, and vice versa, reflecting the vehicle's load capacity within a certain range. Like power, automobile torque is one of the main indicators of an engine, reflected in vehicle performance, including acceleration, climbing ability, and suspension. 2. Is higher automobile torque always better? Generally speaking, higher torque is better. For family cars, higher torque means better acceleration; for off-road vehicles, higher torque allows for steeper climbing; for trucks, higher torque enables greater load capacity.
4
2
Share

What is the fuel consumption of the Mazda CX4?

Mazda CX4 has a fuel consumption of 7.9 liters per 100 kilometers. Here are specific methods to reduce fuel consumption: 1. Lightly press the accelerator: When starting at low speeds, the car consumes the most fuel. Therefore, gently pressing the accelerator during startup to prevent excessively high RPM can effectively reduce fuel consumption. 2. Avoid high RPM: Try to avoid unnecessary high RPM as fluctuating engine speeds can significantly increase fuel consumption. 3. Regular maintenance: Change the engine oil and remove carbon deposits. 4. Avoid emergency braking: Anticipating road conditions in advance not only improves driving safety but also saves fuel. For example, gradually slowing down before traffic lights and utilizing inertia to glide.
9
4
Share

What Are the Reasons for Rapid Blinking of Turn Signals?

Reasons for rapid blinking of turn signals include: 1. Burned-out turn signal bulb; 2. Poor contact in the turn signal; 3. Inconsistent power of turn signals; 4. Mismatched turn signal models; 5. Faulty control relay. Solutions for rapid blinking of turn signals are: 1. Replace the faulty bulb; 2. Replace the control relay. How to use turn signals: 1. Push the turn signal lever to the left to activate the right turn signal; 2. Push the turn signal lever to the right to activate the left turn signal; 3. Push the turn signal lever upward to make the turn signals flash. Functions of turn signals: 1. Indicate the turning direction to pedestrians or vehicles; 2. Show the direction for overtaking or lane changing; 3. When both left and right turn signals are on simultaneously, it indicates an emergency situation to alert other vehicles.
4
1
Share

Will points be deducted for stopping over the white line at a traffic light?

Drivers who stop over the white line at a traffic light will be penalized with 3 demerit points and a fine of 200 yuan. Here are the specific details about stopping over the white line at a traffic light: 1. Definition of violation: Stopping over the white line at a traffic light constitutes a violation of traffic marking instructions, as the white solid line intersection serves as the stop line. 2. Penalty regulations: According to the regulations on the application and use of motor vehicle driving licenses, it can be recorded as a violation of prohibited markings with 3 demerit points, or as failing to drive as required at intersections along the vehicle's driving route, with 2 demerit points. 3. Additional explanation: If drivers do not comply with the prescribed driving rules on the road, resulting in corresponding traffic violations, it will affect their driving record with corresponding demerit points.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.