Can a Dash Cam Monitor the Inside of the Car?

3 Answers
VonSkylar
07/30/25 2:54am
Generally, dash cams are only responsible for recording the road conditions in front of the vehicle, while some models also support dual recording of both front and rear views. Here are the specific details about dash cams: 1. The loop recording settings for dash cams usually offer options such as 1 minute, 2 minutes, 3 minutes, 5 minutes, and 10 minutes. Once a segment is recorded, it moves on to the next. 2. When setting the loop recording time, avoid setting it too short or too long. If the recording time is too short, the video will be split into more segments, increasing the chance of dropped frames. Conversely, if the time is too long, fewer video segments will be stored, and they will be overwritten quickly. It is recommended to set the time to 3 or 5 minutes for optimal performance. 3. A dash cam is a device that records images, sounds, and other relevant information during vehicle operation. After installation, it can record the entire driving process, including video and audio, providing evidence in case of traffic accidents.
Was this review help?
19
0
Share
DeJosephine
08/16/25 9:15am
Having driven for many years, I have some insights on whether dash cams can monitor the inside of the car. Standard dash cams primarily record the road conditions outside the vehicle to prevent accident disputes, usually with the lens facing forward and unable to capture the interior. However, if you install a dual or triple-lens version, like the one I use, there's a camera that can be turned inward to specifically record the activities of the driver and passengers. This can be quite useful in certain scenarios, such as ride-hailing drivers using it to monitor passenger behavior to prevent disturbances, or parents wanting to check on their kids in the car. That said, privacy needs to be handled carefully—when installing, make sure the camera only points at specific areas to avoid unintentionally infringing on others. I've used the interior recording feature during long trips, and upon reviewing the footage, I found it captured small details, like my pet moving around in the back seat, which gave me peace of mind afterward. Overall, it can monitor the inside of the car, but it depends on the model you buy and how it's set up.
Was this review help?
19
2
Share
Expand All
VonAngela
10/22/25 2:13am
As an automotive technology enthusiast, I must say whether a dash cam can monitor the interior depends on its configuration. Standard single-lens devices only record the road ahead, but dual-lens or 360-degree versions come with additional cameras that can be installed facing the cabin, thus capturing interior footage. Technically, some high-end models feature night vision and wide-angle lenses, enabling clear cabin recording even at night, which aids safe driving by monitoring driver fatigue, for instance. However, functionality varies greatly, requiring careful product selection. From my research on car accessories, I've learned that improperly set interior cameras may create blind spots or distort footage, compromising effectiveness. Users are advised to clearly define their needs when purchasing, opt for models with adjustable lenses, and regularly check if the angles remain optimal.
Was this review help?
10
5
Share
Expand All
More Forum Discussions

How to Check the Engine Serial Number?

Under the B-pillar on the passenger side, open the door to see it. This nameplate only specifies the year and month. The nameplate also notes the vehicle's chassis number. Additionally, the certificate of conformity that comes with the new car is located in the upper right corner of the certificate. The production date indicated here can be precise to the year, month, and day. Related precautions for engine disassembly: 1. Disassemble after the engine cools down: Disassembling after the engine cools down makes it easier to remove parts and prevents deformation during disassembly, as high temperatures weaken rigidity, making parts prone to deformation. 2. Avoid deforming the oil pan during removal: The Wuling B-series engine uses an iron oil pan, which is difficult to remove due to the adhesive on it. Avoid forcing it open at high temperatures to prevent deformation, which could lead to oil leaks after reassembly. The best method: Use specialized tools for removal. 3. Remove bolts in sequence: Removing bolts in order prevents breakage or deformation during disassembly. 4. Use specialized tools for inspection: After engine disassembly, each component needs to be inspected. Many experienced mechanics rely on visual or tactile methods, but for beginners or those with less experience, professional tools are necessary (and this is also the most accurate and recommended method). Follow the repair manual's instructions and use tools such as calipers, micrometers, and dial indicators.
4
4
Share

How much engine oil does the Kove 500X require?

The Kove 500X requires approximately 4L of engine oil for each maintenance service. The replacement interval is about 1 year or 10,000 kilometers. If the vehicle is driven less frequently, the oil can be changed once a year. However, for vehicles frequently used for long-distance travel or in poor condition, it is recommended to change the oil every 10,000 kilometers or every six months. Prolonged replacement intervals may potentially cause damage to the engine. Steps for changing the engine oil: Lift the vehicle, remove the protective plate, and place a container with a capacity of about 10 liters under the oil drain plug. Unscrew the drain plug and use an air gun to blow into the oil filler port for two minutes. After draining, tighten the drain plug and wipe it with a tissue to check for leaks. Reinstall the protective plate and lower the vehicle. Use a funnel to add oil through the filler port. Precautions when changing engine oil: Perform the change while the engine is warm to ensure the old oil is drained as thoroughly as possible. Add the appropriate amount of new oil. After adding the oil, start the engine and check all components for leaks. Run the engine for 3 minutes to confirm the oil level is at the normal mark.
18
1
Share

Is It Recommended to Buy a Test Drive Car with 5,000 Kilometers?

A test drive car with 5,000 kilometers can be purchased, but it must be well-maintained. New cars require regular maintenance to ensure better performance, especially during the initial break-in period. Below is relevant information about test drive cars: 1. Concept: A test drive car refers to a vehicle provided by a 4S store or car dealership for potential buyers to test drive. Generally, since the vehicle's various performance aspects are tested during the drive, drivers may engage in behaviors unsuitable for the break-in period, such as sudden acceleration or hard braking. Therefore, test drive cars are usually sold at a discount. Buyers should carefully consider their own situation before purchasing a test drive car. 2. Key Considerations When Choosing a Car: (1) Try to select a recently produced vehicle, preferably one manufactured within the last one or two months. (2) Pay attention to tire wear. For vehicles frequently used for test drives, tire wear can be a distinguishing factor. Buyers can compare the tires of several new cars to assess the vehicle's condition in detail. Normally, vehicles stored in a warehouse by the manufacturer and transported to the 4S store via freight will have minimal tire scratches. (3) Check the door handles and keys. Frequent door openings and closings often leave subtle traces. Additionally, vehicles with mechanical keys may show scratches around the lock due to repeated use. These details can help verify the authenticity of the vehicle.
2
4
Share

How to Deal with Abnormal Noises from Valve Tappets?

There are three main methods to address abnormal noises from valve tappets: 1. Valve leakage noise: Typically occurs outside the valve chamber, more noticeable under high load and low RPM conditions, with the noise intensifying as the load increases. The solution involves removing the cylinder head, lapping the valves, checking the valve spring tension, and readjusting the valve clearance. 2. Valve tapping noise: During engine idling, a continuous tapping sound occurs between the valve stem end and its driving component. The remedy is to readjust the valve clearance to the engine's standard specifications. If the locking nut on the adjustment screw is loose, it should be securely tightened. Severely worn components should be replaced, and broken valve springs must be replaced promptly. 3. Valve seat noise: Caused by seat ring detachment, rough valve seat surface, or substandard machining precision. The solution is to reinstall the valve seat according to assembly specifications, ensuring the upper surface is flush with the body plane and any protruding parts are ground flat.
14
2
Share

How to Use the Car Wiper Switch?

The method to use the wiper is to push the wiper control upward for an automatic return, which activates the wiper once, while downward it is divided into three gears. Below is relevant information about car wipers: 1. Basic Introduction: The wiper, also known as a windscreen wiper, is a device used to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety. Due to legal requirements, almost all cars are equipped with wipers. Rear windows of vehicles such as hatchbacks and SUVs also have wipers. Apart from cars, other means of transportation like trains and trams are also equipped with wipers. Some engineering machinery, such as cranes, also have wipers installed. 2. Operating Principle: The power source of the wiper comes from an electric motor, which is the core of the entire wiper system. It uses a DC permanent magnet motor, and the wiper motor installed on the front windshield is generally integrated with the worm gear mechanical part. The function of the worm gear mechanism is to reduce speed and increase torque, and its output shaft drives a four-bar linkage mechanism, which converts continuous rotational motion into left-right swinging motion.
5
0
Share

Will Polishing Damage the Car's Paint?

Car polishing does have an impact on the paint. Here is some relevant information about car polishing: 1. Introduction: Car polishing is a step in the car detailing process that is performed before waxing, sealing, or coating. This is because sealing or coating requires polishing first, and only a finely polished car can achieve a mirror-like finish. This is a necessary step for sealing. Without polishing, the paint surface will not be smooth, and the sealant will not last long, failing to provide long-term adhesion. 2. Function: It restores the mirror-like effect of the paint surface, fills in the pores of the paint, and enhances the gloss and luster of the paint. The coarseness of the polishing compound used depends on the level of oxidation of the paint. For example, coarse compounds like rubbing compound are used to remove deeper scratches but can cause more damage to the paint. If oxidation is not noticeable, as is often the case with new cars with good paint quality, you can choose not to polish when waxing or sealing.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.