Can a Class C license drive a 9-seater business vehicle?

1 Answers
JosephineLee
07/28/25 5:16pm
C1 driver's license is authorized to drive small and mini passenger vehicles, light and mini cargo vehicles, and light, small, and mini special purpose vehicles. Class C licenses specify that the vehicle length should not exceed 6 meters, and as long as it has a blue license plate with no more than 9 seats, a C1 license holder can drive it. Here is more detailed information: The driving scope of a C1 driver's license includes small and mini passenger vehicles, light and mini cargo vehicles, and light, small, and mini special purpose vehicles; small passenger vehicles with seating capacity less than or equal to 9 people. According to these standards, a C1 license cannot drive vehicles with more than 9 seats. Vehicles that a C1 license cannot drive include: large buses, tractors, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams.
Was this review help?
7
0
Share
More Forum Discussions

What Causes an Automatic Transmission Car to Stall While Reversing?

There are several reasons why an automatic transmission vehicle may stall while reversing, including electrical circuit malfunctions, excessive carbon buildup in the fuel injectors or spark plugs, or other electrical issues. Here are the relevant details: 1. Specific causes: Stalling during operation may occur due to low-voltage power interruption, excessive carbon deposits on spark plugs leading to unstable ignition and occasional stalling, or severe engine operation conditions caused by excessive carbon buildup in components like the throttle body and fuel injectors, making the vehicle prone to stalling at low speeds. 2. Electrical circuit malfunctions: Electrical faults, such as low-voltage power interruption during driving, can cause stalling. In such cases, it is advisable to primarily inspect the ignition and starter switches, as well as the fuse box. Stalling caused by short circuits in low-voltage circuits tends to occur intermittently; therefore, checking the low-voltage circuits for component failures is essential.
3
4
Share

Should the control arms be replaced together when the Verna pulls to the left while braking?

When the Verna pulls to the left while braking, the control arms should be replaced together. Relevant information is as follows: 1. The specific function of automobile control arms: Automobile control arms guide and support the suspension, and their deformation affects wheel alignment, reducing driving stability. If there is a problem with the front control arm, the steering wheel may shake, the car may pull to one side when the steering wheel is released, and it may be difficult to control direction at high speeds. If these symptoms are not obvious, it may not be necessary to replace the control arms; instead, a four-wheel alignment may suffice to stabilize the direction. 2. Composition: Automobile control arms are the connecting mechanism between the frame and the wheels. Unlike bicycles, which have a rigid connection between the frame and wheels, making rides on rough roads uncomfortable, automobile control arms are designed with flexible connections and shock absorbers, significantly improving ride comfort and handling stability on uneven roads.
9
2
Share

Why does a dual-clutch transmission not move when in D gear without pressing the accelerator?

The reason a dual-clutch transmission does not move when in D gear without pressing the accelerator is that the engine's throttle opening is too small, and the fuel injector's fuel supply is insufficient, requiring inspection and repair at a 4S shop. The clutch is introduced as follows: 1. Definition: The clutch is installed between the engine and the transmission, serving as the assembly component in the vehicle's drivetrain that directly connects to the engine. Typically, the clutch is mounted together with the engine crankshaft's flywheel group, functioning as the component that cuts off and transmits power between the engine and the vehicle's drivetrain. 2. Function: Its role is to gradually engage the engine with the transmission, ensuring smooth vehicle starts; temporarily disconnect the engine from the transmission to facilitate gear shifting and reduce impact during shifts; and act as a separator during emergency braking to prevent overload in the transmission and other drivetrain components, thereby providing certain protective effects.
6
0
Share

How Many Cylinders Does the Toyota Prado Have

Toyota Prado is equipped with both four-cylinder and six-cylinder engines. Here is some relevant information about the Toyota Prado: 1. The Toyota Prado 2700 features a four-cylinder engine with high fuel efficiency, emphasizing active safety design and configurations. 2. The Middle East version of the Toyota Prado 2700 comes with a six-cylinder engine, further enhancing safety. It adopts a body-on-frame construction with an independent ladder frame and a solid rear axle suspension, ensuring handling and driving stability. 3. Generally, the more cylinders an engine has, the larger its displacement. For example, a 2.7L engine has four cylinders, a 4.0L engine has six cylinders, and engines with 4.6L, 4.7L, and 5.7L displacements have eight cylinders. 4. Since more cylinders typically mean larger displacement, vehicles with more cylinders tend to have higher fuel consumption and greater engine power.
11
3
Share

Where is the Lifan 320 cabin air filter located?

The cabin air filter of the Lifan 320 is located inside the glove compartment on the passenger side. You can access it by opening the glove compartment. The functions of the cabin air filter are as follows: 1. It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. 2. It separates solid impurities such as dust, pollen, and abrasive particles from the air. 3. It absorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air, with strong and long-lasting moisture absorption. 4. It prevents car windows from fogging up, ensuring clear visibility for drivers and passengers, thus enhancing driving safety. It provides fresh air to the occupants, preventing them from inhaling harmful gases and ensuring driving safety. It also effectively sterilizes and deodorizes. 5. It maintains clean air in the cabin, preventing bacterial growth and creating a healthy environment.
1
2
Share

Where is the air filter element of the Peugeot 301 located?

The air conditioning filter element of the Peugeot 301 is located in the glove box on the left side of the dashboard. Below is some relevant information about the Peugeot 301: 1. The Dongfeng Peugeot 301 model is the first new model under Peugeot's new naming system to be named with a 1 at the end. The Dongfeng Peugeot 301 is primarily designed for emerging markets and also adopts Peugeot's new naming strategy. 2. In terms of exterior design, the front grille features a large-mouth design. The Peugeot 301's grille is adorned with small wavy horizontal chrome trim strips, with the standing small leopard emblem in the center, giving it a very imposing look. 3. This car is equipped with a 1.6-liter naturally aspirated engine, with a combined fuel consumption of 6.3 liters per 100 kilometers. It delivers 115 horsepower and 150 Nm of torque, paired with a 6-speed automatic transmission and front-wheel drive.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.