Can a Class C License Drive a 4.2-Meter Vehicle?

1 Answers
DiIsabelle
07/30/25 8:39am
Can a Class C License Drive a 4.2-Meter Vehicle? A Class C license can drive a 4.2-meter vehicle as long as it is a blue-plate truck, but the driver needs to obtain the corresponding freight transport qualification certificate. The maximum vehicle length for a Class C1 driver's license is less than 6 meters, and the total mass is less than 4,500 kg. A 4.2-meter box truck can be driven with a Class C1 license, as box trucks are low-speed trucks. However, if it is a large truck, a Class C1 license is insufficient. Box trucks can be equipped with rear doors, side doors, fully enclosed, semi-enclosed, or cargo rail options, offering advantages such as flexibility, ease of operation, high efficiency, large transport capacity, space utilization, safety, and reliability. They are widely suitable for transporting various goods and are used by factories, supermarkets, and individuals alike. They can operate on intercity highways as well as within urban areas to complete transport tasks.
Was this review help?
15
1
Share
More Forum Discussions

How to Remove the Spare Tire of Dongfeng Nissan Sylphy?

Here are the specific steps to replace the spare tire for the Dongfeng Nissan Sylphy: 1. Park the car on a flat and solid surface, and turn on the hazard lights. In case of rain, snow, or fog, place a triangular warning sign about 100 meters behind the car. 2. Loosen the screws of the tire that needs to be replaced, then use a jack to lift the car. 3. After lifting the car, remove all the screws from the tire and replace it with the new one. 4. After installing the new tire, slightly tighten the screws, then lower the car. 5. Once the car is lowered, fully tighten all the screws on the tire to complete the spare tire replacement. Here are some important notes regarding tires: 1. Regularly check the tire pressure, which is usually around 2.5 bar. 2. Always inspect the tires before driving on highways. If any damage is found, repair or replace them promptly to prevent safety hazards. 3. When replacing tires, it is best to use original equipment manufacturer (OEM) tires to ensure quality. 4. If modifying tires and rims, make sure to register the changes with the vehicle management office.
10
5
Share

How to remove the odor inside a Surui new car?

Here are the methods to remove the odor inside a Surui new car: 1. Open the car doors for ventilation, especially under the sun. 2. Place grapefruit peels or tea leaves inside the car to absorb the odor. Below is a detailed introduction to the Surui: 1. The Surui is a compact sedan under BYD. 2. In terms of appearance, the Surui features a more stylish and elegant design, with a front face that integrates dual chrome strips and lens-type headlights seamlessly; the sides and rear also adopt a minimalist design style, with simple lines creating a visually cohesive effect. 3. For interior configuration, it uses a harmonious black and beige dual-tone interior. 4. In terms of features, the 8-way electrically adjustable driver's seat is soft and comfortable; the full-leather multifunction steering wheel integrates multimedia controls, instrument function settings, cruise control, and other shortcut keys for smart convenience. The 4.3" TFT screen with cannon-style LCD instrument cluster offers a visually striking effect; the 7-inch high-definition capacitive touchscreen includes an in-car digital TV.
3
0
Share

Does the Levin have a one-key start feature?

The Levin is equipped with a one-key start system. Here are specific details about the car's one-key start feature: 1. The car's one-key start system leads a new era of intelligent automotive life, utilizing a 3D (three-dimensional) low-frequency antenna for the smart card. 2. The function of the one-key start system is to ensure non-directional sensing with stable and precise sensing distance. Below are specific details about the Levin: 1. The new-generation Levin adopts a younger and sharper design, featuring Toyota's latest family design language, making it more striking. 2. The interior design has also seen significant improvements, with more curves and simplicity compared to the older model's straightforward style. 3. In terms of power, the new-generation Levin's pure fuel version and hybrid version are equipped with a 1.2T inline four-cylinder engine and a 1.8L hybrid system, respectively, similar to the previous Levin model.
10
2
Share

What is the mileage for the first maintenance of BMW X1?

The first maintenance for BMW X1 is generally recommended at either one year or 10,000 kilometers, whichever comes first. Below are the specific details about BMW X1: 1. The mileage for the first maintenance of BMW X1 can be either 5,000 kilometers or 10,000 kilometers, depending on how the owner breaks in the vehicle, as there is no fixed standard. 2. It is important not to exceed the 10,000-kilometer limit. The first maintenance items are relatively simple, mainly including an oil change and oil filter replacement. Below are the key inspections and replacements to be completed during the first maintenance: 1. It is essential to change the engine oil and oil filter and clean the air filter. 2. Check whether the coolant level in the car is within the normal range. 3. Inspect the car's brakes and check for any scratches on the chassis components. 4. Verify the oil level of the power steering fluid and check for any oil leaks at the pipe connections. 5. Examine the condition of the generator, air conditioning, water pump, and belts for aging and tension. 6. Check the tire pressure and wear condition; if there is significant wear, perform a tire rotation.
20
1
Share

Where is the fuse box located in a Volkswagen Passat?

The fuse box in a Volkswagen Passat is located on the left side of the driver's seat. You can access it by opening the cover panel. Below are the steps for replacing a fuse: 1. For safety, ensure the engine and power are turned off before locating the fuse box. 2. Find the corresponding position of the fuse box and carefully pry open the cover panel using a screwdriver or other tool. Inside the cover panel, you can locate the corresponding component fuse based on the provided information. 3. Use a light or a test pen to perform a preliminary check on the fuse. Confirm that it has blown before considering replacement. 4. The new fuse should match the old one in size, color, and all specifications. 5. If the component still does not respond after replacing the fuse, visit a repair shop as soon as possible. Below are some important precautions regarding fuses: 1. Installing fuses of different specifications may cause damage to components or even pose a fire risk. 2. Do not replace a fuse with one that exceeds the rated current, as this may cause the component to burn out. 3. Do not attempt to reconnect a broken fuse. 4. Never use metal strips, paper clips, or similar metal objects as substitutes for fuses.
4
0
Share

How to Reset the Maintenance Reminder on a Volkswagen Polo?

To reset the maintenance reminder on a Volkswagen Polo, follow these steps: 1. Turn off the ignition switch and shut down the engine. 2. Press and hold the right button (reset/adjust) on the instrument panel. 3. While keeping the right button pressed, turn on the ignition switch. 4. Continue holding the "reset/adjust" button until the maintenance light enters reset mode, then release the right button. 5. Within 20 seconds of releasing the right button, press the left "menu button" once to confirm the reset. Following this procedure will clear the maintenance interval indicator and restore it to the normal display mode.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.