Can a car with very dark window film pass the annual inspection?

1 Answers
DiIsla
07/29/25 12:11pm
Window film that is too dark cannot pass the annual inspection. Below are the specific details: Glass: Before the annual inspection, the window film on the vehicle must be removed; otherwise, it will not pass the inspection. During the inspection, the windshield of the vehicle should be intact, with no cracks or damage in the driver's field of vision, and no mirrored reflective sunshade film should be applied to any of the windows. Annual Inspection: The annual inspection, also known as the annual check, refers to the yearly or biennial safety inspection of the vehicle, which includes a comprehensive check of the horn, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, license plate installation, and more. Before the annual inspection, it is essential to check if the vehicle has any outstanding traffic violations. If there are any, they must be resolved before proceeding with the inspection. Otherwise, the annual inspection cannot be completed if there are unresolved violations.
Was this review help?
17
0
Share
More Forum Discussions

How to Start a Manual Transmission Car Without Stalling?

Manual Transmission Car Without Stalling_58 Auto Here are the methods to start a manual transmission car without stalling: 1. Press the clutch first: After starting the car, press the clutch with your left foot all the way down; 2. Release the handbrake: Shift into first gear, then release the handbrake. Beginners often forget this step, leading to stalling; 3. Release the clutch: The clutch engagement point varies for each car. Step on the accelerator. Many beginners are afraid to press the accelerator when starting, only slowly releasing the clutch, which is a major reason for stalling. Releasing the clutch and pressing the accelerator should be done simultaneously; 4. Stay calm: Don’t get nervous at a red light. When there are 5 seconds left, lightly press the clutch and shift into gear. When you see the car in front move, release the clutch and gently press the accelerator to avoid stalling.
19
3
Share

What is the Camry's fuel consumption in city driving?

The Camry's fuel consumption ranges from 5.5 to 10.3L. Here are the specific details about the Camry: 1. Model: A mid-size sedan under the Toyota brand. 2. Powertrain: Two powertrain options are available, featuring 2.0L and 2.5L naturally aspirated engines respectively. There is also a hybrid version, which combines a 2.5L naturally aspirated engine with an electric motor. 3. Engine Power: The 2.0L engine delivers a maximum power of 131kw and a maximum torque of 210 Nm. The 2.5L engine produces a maximum power of 154kw and a maximum torque of 250 Nm. The hybrid version's engine has a maximum power of 178 horsepower, and the electric motor provides a maximum power of 120 horsepower.
13
4
Share

What is the fuel consumption of the Mercedes-Benz GLC260?

The Mercedes-Benz GLC260 currently has four models on sale: the 2022 facelift II GLC260L 4MATIC Dynamic, Luxury, the 2022 facelift GLC260L 4MATIC Luxury, and the facelift III GLC260L 4MATIC Dynamic. These models are equipped with a 2.0T turbocharged engine producing 197 horsepower, with an NEDC fuel consumption of 10.5L per 100 kilometers. The fuel tank capacity of the Mercedes-Benz GLC260 varies by model. The distance that can be covered on a full tank of fuel is as follows: For models equipped with the 197-horsepower engine, the fuel tank capacity is 66L, allowing a distance of 66/10.5*100=629km on a full tank. Vehicle fuel consumption is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption include: Driving habits: Aggressive driving behaviors such as rapid acceleration, frequent overtaking, and not easing off the throttle before reaching a red light can increase fuel consumption. The vehicle itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements typically produce more power, requiring more gasoline for combustion. Heavier vehicles also have higher fuel consumption due to the greater driving torque needed. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during a cold start, requiring more gasoline for combustion, which increases fuel consumption. Additionally, in cold temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, further increasing fuel consumption.
10
1
Share

Do New Cars Need Break-in Oil?

New cars do not require break-in oil during the run-in period. Here is relevant information about break-in oil: 1. Composition: Break-in oil is essentially engine oil mixed with trace amounts of grinding powder (whose main component is aluminum oxide, also known as corundum, the same material as grindstones). This accelerates wear to shorten the run-in period. 2. Formation factors: The additive aluminum oxide exists in the engine oil as micro-solid particles, with crystal hardness far exceeding that of piston aluminum. These particles embed into the piston's outer diameter. Even after switching to regular engine oil post run-in, the fine grindstone particles on the piston surface continue to abrade the engine until fully consumed.
5
1
Share

Why Is My Car Emitting White Smoke?

Car emitting white smoke is usually caused by excessive moisture in the gasoline, or damage to the water channel gasket, cylinder liner, allowing coolant to enter the combustion chamber, resulting in white smoke emission. Below is a relevant introduction to the causes of car smoke emission: 1. Blue Smoke: When a car emits blue smoke, it can generally be determined that the vehicle is "burning engine oil." The main reason for blue smoke is that the oil-gas mixture in the cylinder (note: not gasoline) is contaminated by engine oil vapor. When the engine oil vapor burns, it produces very light blue smoke. Due to its light color, it is often confused with white smoke, so careful identification is necessary. 2. White Smoke: If the car is a turbocharged model, another possible cause is damage to the turbo's oil seal ring on the exhaust side, allowing engine oil to leak into the exhaust pipe and burn, forming white smoke.
10
4
Share

What is the fuel consumption of the SYM Cruise 150?

The SYM Cruise 150 has a fuel consumption of 3 liters per 100 kilometers. The fuel consumption of a motorcycle is not only related to the motorcycle itself but also to the rider's driving habits and road conditions. To improve fuel efficiency, it is advisable to drive on smooth roads and adjust driving habits. Below is some relevant information about the SYM Cruise 150: 1. Exterior: The SYM Cruise 150 has a design very similar to the Cruise 180, featuring sharp body lines and extensive use of matte finishes, giving it a modern and stylish appearance. As a 150cc scooter, it comes with 14-inch wheels and a full-looking front end, resembling a 250cc scooter. 2. Features: The Cruise 150 is equipped with a full LCD dashboard displaying speed, RPM, fuel level, and other information. It also features an ABS system, and the distinctive headlight and logo enhance its visibility, making it easily recognizable even under bright sunlight.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.