Browse

Antiques Collectibles Apparel Baby Kids Items Books， Movies And Music Electronics Free Stuff Garden Outdoor Health Beauty Home Goods Home Improvement Supplies Musical Instruments Office Supplies Pet Supplies Sporting Goods Ticket Toys Games Transportation Others

Used Cars New Cars Others

Business Crafts Design And Web Events Home Improvement Legal Lessons Personal Pets Photography Repair And Technical Support Wellness Writing， Translation， And Transcription Others

Activities & Groups Artists & Musicians Classes & Lessons Events Friendship & Networking Lost & Found Rideshare Sports Teams Volunteers Travel & Travel Partners Skills & Language Swap Other

Can a car with tire pressure of 2.2 still drive on the highway?

1 Answers

CatherineFitz

07/29/25 3:15pm

Tire pressure of 2.2 is acceptable for highway driving, but it's important to control the speed, which should be maintained between 80-100km/h. According to the international GBT2978-2008 standard requirements, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: should not exceed 3.5bar. Tire pressure reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally the warning light on the dashboard will turn off, indicating the tire pressure reset is complete.

Was this review help?

17

5

Share

More Forum Discussions

How to Drive a New Honda XR-V on the Highway?

The methods for driving a new Honda XR-V on the highway are: 1. Avoid frequent hard braking; 2. Maintain appropriate RPM and avoid rapid acceleration at high RPM; 3. Use gears reasonably and avoid prolonged driving in low gears; 4. Do not overload the vehicle. Taking the Honda XR-V 2019 Manual Classic Edition National VI as an example, its body dimensions are: length 4328 mm, width 1772 mm, height 1605 mm, wheelbase 2610 mm, and fuel tank capacity 50 liters. The Honda XR-V 2019 Manual Classic Edition National VI is equipped with a 1.5L naturally aspirated engine, with a maximum power of 96 kW, maximum torque of 155 Nm, and maximum torque speed of 4600 rpm.

Where is the car tracking locator located?

Car tracking locators can be located in: 1. Front and rear bumpers; 2. Inside the trunk or spare tire. A car locator, also known as a car tracking device, is primarily a vehicle anti-theft GPS positioning product with functions including: SMS positioning, timed positioning, online query, remote monitoring, and remote vehicle locking. The functions of a car tracking locator are: 1. Real-time tracking of the vehicle and retaining three months of driving routes; 2. Printing Chinese address reports; 3. Automatic real-time positioning of the vehicle; 4. Timed positioning and tracking of registered vehicles in different periods; 5. Increasing effective working hours. The car locator consists of GPS server equipment, and its terminal relies on satellites to monitor the vehicle.

What to Do When the Engine Shakes in Cold Weather?

Solutions for engine shaking in cold weather include: 1. Clean the fuel system and check if the idle speed motor has carbon deposits; 2. Inspect the spark plugs for excessive carbon buildup and replace them if necessary; 3. Check the fuel pressure and replace components as needed; 4. Verify that the battery voltage is within the specified range. Reasons for engine shaking in cold weather are: 1. Dirty throttle body or excessive carbon deposits in the fuel injectors; 2. Fuel quality issues; 3. Faulty coolant temperature sensor; 4. Unstable fuel pressure; 5. Worn engine mounts; 6. Faulty spark plugs or ignition coils. Engine maintenance methods include: 1. Use high-quality engine oil; 2. Use qualified coolant; 3. Regularly clean the radiator scale; 4. Periodically remove carbon deposits from the car; 5. Replace the car's three filters on time.

How to Check the Production Date of a Seat Belt?

To check the production date of a seat belt, pull the belt out completely and look for the label at the base where the production date is usually indicated. A seat belt, also known as a safety belt, is a type of occupant restraint system designed to secure the occupant during a collision, preventing secondary impacts with the steering wheel, dashboard, or ejection from the vehicle. The steps for using a seat belt are: 1. Pull out the belt and fasten the buckle to ensure it is securely fastened around the body; 2. Adjust the lap belt so it sits across the hips; 3. Adjust the shoulder strap so it lies diagonally across the collarbone; 4. Before driving, check that the belt is secure and functioning properly; 5. To release, press the release button on the buckle and allow the belt to retract into the reel, then store the buckle in its designated position.

Can Brake Pads Be Replaced by Yourself?

Brake pads can be replaced by yourself. The method to replace brake pads is as follows: 1. Lift the car and remove the tire; 2. Unscrew the fixing screws on the brake caliper and remove the brake caliper; 3. Remove the old brake pads and push back the brake caliper piston; 4. Clean the installation bracket of the brake disc and install the new brake pads. The methods to determine whether brake pads need to be replaced are: 1. Observe that the thickness of the brake pads is only one-third of the original; 2. There is abnormal noise when lightly braking; 3. The braking response is slow, and the braking force becomes weak. Brake pads, also known as automotive brake linings, refer to the friction materials fixed on the brake drum or brake disc that rotates with the wheel.

What are the differences between Type A and Type B cars?

The differences between Type A and Type B cars are: 1. Different vehicle types: Type A cars are compact cars; Type B cars are mid-size cars. 2. Different lengths: Type A cars are between 4.3 to 4.6 meters in length; Type B cars are between 4.6 to 4.9 meters in length. Representative models of Type A cars include: Skoda Octavia, FAW-Volkswagen Bora, Sagitar, FAW Toyota Vios, Corolla, etc.; Representative models of Type B cars include: Buick Regal, Citroën C5, Peugeot 508, Honda Accord, Passat, etc. Taking the FAW-Volkswagen Bora as an example, its front suspension is MacPherson independent suspension, and the rear suspension is torsion beam non-independent suspension.

Trending Ranking

What is the 0-100 km/h acceleration time of the Porsche Cayenne?

What is the suitable engine oil for the LaCrosse?

Where are the various sensors of the engine located?

How to Wash Tires to Make Them Black and Shiny?

Does prolonged engine idling affect the car?

Which Audi A5 model is a convertible?

What does 260turbo mean?

How to set the dashboard to display total mileage on Inspire?

How to Defog a Car on Rainy Days?

What does 'auto' mean in Mercedes-Benz?

More Forum Discussions

How often should the Octavia battery be replaced?

Where is SWM Motors produced?

How to Drain the Coolant in a Cadillac XT5?

What is the reason for the persistent illumination of the BMW engine yellow light?

Help

Cookie

Cookie Settings

© 2025 Servanan International Pte. Ltd.