···
Log in / Register

Can a Car with Replaced Airbags Still Be Driven?

4 Answers
LaJulianna
07/29/25 11:30am

Excluding flood-damaged or accident vehicles, a car with replaced airbags can still be driven. Below is relevant information about airbags: 1. History: The airbag was first proposed by Hetrick in August 1953 and obtained the U.S. patent for 'Automobile Safety Cushion Assembly.' With the establishment of vehicle safety standards in various countries, the installation rate of airbags has been increasing. In Europe, the U.S., Japan, and other countries, the installation rate of airbags in vehicles has reached nearly 100%. 2. Composition: Mainly consists of airbag sensors, collision airbags, and electronic control devices. The driver-side collision airbag is installed in the steering wheel; the passenger-side collision airbag is generally installed on the dashboard. Airbag sensors are installed on the left, right, and middle sections of the cabin partition; the middle airbag sensor and airbag system are installed together with the electronic control device. The airbag module mainly consists of the airbag, gas generator, and igniter.

Was this review help?
16
2
Share
Sanders
08/13/25 7:18pm

Can a car still be driven after replacing the airbag? As an expert with years of car repair experience, I've seen many similar cases. The answer is definitely yes, but only if the replacement process is professional and standard. The airbag is a life-saving device, including the ejection module and impact sensors. When replacing it, ensure to use original or high-quality parts; otherwise, the airbag may fail in an emergency. It's recommended to go to a 4S shop or a certified repair shop for the operation, and after replacement, check if the system indicator light turns off normally. In my experience, a correctly replaced car is just as safe and reliable, but never go for cheap roadside stalls, as they can easily lead to safety hazards. It's also a good habit to test the airbag response during regular maintenance to avoid unexpected risks. Driving on the road is completely fine. If the car is too old or the airbag has been replaced many times, considering the overall safety, it might be more prudent to replace the car at an appropriate time.

Was this review help?
2
0
Share
Expand All
OMaverick
10/08/25 4:46am

Can a car with replaced airbags still be driven? I must say, having driven for over a decade, I've experienced this situation myself. A car with replaced airbags can absolutely be driven normally as long as the repair was done properly. My own car had its airbags replaced after a minor accident last year. I was initially concerned, but the mechanic assured me everything was done by the book, and now it drives just like before. The key is to confirm that genuine airbag parts were installed—avoid counterfeit products. After replacement, monitor the dashboard warning light—if it turns off, it indicates the system is functioning normally. Regularly inspect airbag-related components, such as sensor positions, to ensure nothing is loose. Overall, this isn't a major issue; continuing to use the car saves both peace of mind and money. But if you still feel uneasy, getting a comprehensive diagnostic check at a professional shop will give you extra reassurance.

Was this review help?
5
3
Share
Expand All
LeJourney
11/21/25 6:05am

Can the car still be driven after replacing the airbag? From a safety perspective, here's my opinion. Airbags are life-saving devices, and if replaced professionally, the car can still be driven normally. I emphasize the importance of using reliable parts to avoid the risk of failure due to inferior replacements. After replacement, ensure the system is tested properly and the indicator light functions normally—don't ignore any abnormal flashing. When driving on the road, pay attention to your driving habits and avoid reckless behavior that could lead to accidents. During regular maintenance, check the airbag area for any signs of wear. By handling it this way, you can drive with peace of mind.

Was this review help?
17
0
Share
Expand All
More Forum Discussions

What Are the Reasons for the Brake Pedal Being Hard to Press and the Car Failing to Start?

The reasons for the brake pedal being hard to press and the car failing to start include a leaking vacuum booster pump or a damaged brake booster pump. Below are the specific explanations: 1. Vacuum Booster Pump Leakage: If the car's vacuum booster pump is leaking or malfunctioning, it should be noted that the force applied to the brake pedal is amplified by the brake booster pump. If it fails, the brake loses its power assistance, making it difficult to press down. 2. Brake Booster Pump Damage: Pressing the brake pedal after turning off the engine is also related to the brake booster pump. The brake booster pump only continuously generates vacuum when the engine is running. When the engine is off, it relies solely on the residual vacuum assistance left from previous operations.
4
4
Share

Is Secondary Ignition Harmful to the Car?

Secondary ignition after the car has started can cause significant harm to the vehicle, potentially damaging the starter gear or burning out the starter. Below are specific details regarding secondary ignition in cars: 1. Symptoms: The most obvious sign of secondary ignition is hearing an abnormal "grinding" noise from the engine area. This noise is produced by the starter gear clashing with the flywheel. The flywheel rotates at a much higher speed when the engine is running, far exceeding the starter's speed. Due to this significant speed difference, the starter's drive gear does not re-engage with the flywheel teeth during secondary ignition, thus preventing the starter from being damaged. 2. Hazards: Issues such as starter slippage, severe wear of the starter drive gear, and burnout of the starter coil are directly related to secondary ignition. Additionally, secondary ignition can also cause some wear to the teeth on the flywheel.
9
3
Share

Where is the position to turn off the headlights?

The position to turn off the headlights is located at the lower right side of the vehicle's steering wheel, which is a rotary knob that operates by turning up and down. Here is some related information: 1. Car headlights: Car headlights, also known as car front lights or car LED daytime running lights, serve as the eyes of the car. They not only relate to the external image of the car owner but are also closely linked to safe driving at night or under bad weather conditions. 2. Car lights: Car lights are divided into low beam, high beam, fog lights, warning lights, indicator lights, width lights, and reverse indicator lights. Generally, car front lights adopt a four-light system, and the main cause of failure in this four-light system car front light is usually the use of excessively high-power bulbs leading to malfunction.
15
2
Share

How to Report the Loss of a Vehicle Registered Under Your Name?

To report the loss of a vehicle registered under your name, follow these steps: The vehicle owner must submit a loss report application with proof of identity and a theft report at the corresponding window of the vehicle management office. Below is relevant information about vehicle loss reporting: 1. Method: The vehicle owner must submit a loss report application with proof of identity and a theft report at the corresponding window of the vehicle management office. The statutory loss report must be published in a provincial-level publicly circulated newspaper. 2. Required procedures: The documents needed for reissuing a vehicle registration certificate include the "Application Form for Motor Vehicle License Plates and Certificates," the original and a copy of the vehicle owner's identity proof, the motor vehicle inspection record form (processed on-site), and for reissuing the motor vehicle registration certificate, the vehicle owner must bring the vehicle to the vehicle management office.
20
5
Share

Do I need to switch from high beam to low beam when turning off the lights?

No reset is required. Here are the relevant details: 1. First test group: During the Category 3 lighting test, if the high beam is the first lighting signal in the test group, there's no need to reset it. Simply proceed to the next test group and follow the instructions. 2. Final test: If it's the last lighting signal in the test, it's recommended to switch back to low beam after completing the test. During normal testing, there's no need to deliberately check its position. If the lighting signal test begins with the high beam already activated, and the instruction requires switching to high beam, you only need to perform the action of switching to high beam.
14
3
Share

Is the Kodiaq's transmission dry or wet?

Kodiaq uses a wet transmission. The automatic transmission features oil-immersed friction plate clutches, which require the design of a hydraulic coupling or torque converter to work in conjunction with the power flexible connection clutch, making it easy to operate and with a low failure rate. Below is a detailed introduction to the Kodiaq: 1. The Kodiaq is Skoda's first domestically produced mid-size SUV based on the MQB platform. This mid-size SUV made its debut at the 2016 Guangzhou International Auto Show and received widespread attention and praise upon its appearance. The arrival of the Kodiaq broke the awkward situation where Skoda only had one compact SUV, while also providing consumers with a broader range of choices. The performance of the Kodiaq's 7-speed dual-clutch transmission is still considered one of the best in its class, with almost no jerking during low-speed driving, effectively controlling the common issues of dual-clutch transmissions. The gear shifts are crisp and decisive, with upshifts being very proactive during daily driving, keeping the engine speed mostly below 2000 rpm, ensuring better fuel economy. 2. The Kodiaq is equipped with the DQ380 7-speed dual-clutch DSG transmission, which takes into account a large amount of actual Chinese road conditions, providing smooth and jerk-free gear shifts with excellent stability, and optimizes the efficiency of low-speed gear shifting; 7 forward gears with manual and automatic modes, comprehensively upgrading the dual-clutch transmission in terms of power, driving pleasure, and fuel economy. The rapid gear shifting and continuous power improve both power performance and fuel economy; the latest transmission adopts more advanced designs, capable of withstanding a maximum torque of up to 420N·m; the wet dual-clutch form, with continuous circulation of transmission oil, cools and lubricates the dual-clutch module, ensuring more stable performance.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.