Can a Car with Modified Body Kit Pass the Annual Inspection?

1 Answers
EllieDella
07/29/25 2:56pm
If the modified body kit has been registered with the vehicle management office, it can pass the annual inspection. If not registered, it cannot pass the inspection. Changes to the vehicle's body color, model, performance, purpose, and structure, as well as replacement of the frame, body, or engine, all require applying for modification registration with the vehicle management office. Body kits are categorized into minor and major kits, and since they alter the car's appearance, they must be registered with the vehicle management office. Otherwise, the vehicle may be penalized by traffic police or fail the annual inspection. Vehicles with any of the following conditions must undergo the necessary procedures before being inspected: discrepancies between the vehicle's condition and the records in the driving license or archives; damaged, incomplete, or illegible license plates or driving licenses, or self-made license plates; modifications, model changes, or technical transformations without approval and modification procedures; failure to display the required unit name and enlarged license plate characters as specified; improper installation of alarms or indicator lights; or failure to pay road maintenance fees and insurance as required.
Was this review help?
17
1
Share
More Forum Discussions

What are the steps for remote starting the Emgrand GL?

The steps for remote starting the Emgrand GL are: 1. Stand within the remote control range; 2. Press the vehicle's lock button to lock the car; 3. Wait for the vehicle's lights to flash, indicating the operation was successful; 4. Hold down the remote start button at the very bottom of the remote control; 5. The vehicle will start remotely successfully. Taking the 2020 Geely Emgrand GL as an example, it belongs to the compact car category, with body dimensions of: length 4725mm, width 1802mm, height 1478mm, a wheelbase of 2700mm, a fuel tank capacity of 55 liters, and a curb weight of 1335kg. The 2020 Geely Emgrand GL features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 141PS, a maximum power of 104kW, a maximum torque of 235Nm, and is paired with a 6-speed manual transmission.
10
1
Share

What should be noted when driving an automatic transmission car?

When driving an automatic transmission car, the following points should be noted: 1. Do not place your left foot on the brake pedal to avoid mistaking the accelerator for the brake in emergencies; 2. Avoid coasting in neutral as it can easily damage the transmission; 3. When starting the car, do not release the brake too slowly as it may harm the engine; 4. Do not rev the engine when starting the car, as it can cause a sudden increase in speed and lead to safety hazards; 5. When parking, first shift into N (Neutral) gear before shifting into P (Park) gear. The correct method to start an automatic transmission car is: 1. After sitting in the driver's seat, press the start button directly; 2. Depress the brake pedal and press the start button to ignite and start the engine; 3. Release the foot brake and optionally warm up the car while stationary; 4. Depress the brake pedal again and shift into D (Drive) gear; 5. Release the handbrake and slowly lift the foot brake to start moving; 6. Gently press the accelerator according to road conditions for safe driving.
18
3
Share

What is 2.5 bar tire pressure in psi?

A tire pressure of 2.5 bar is approximately 36.25 psi. Both bar and psi are units of pressure, with 1 bar approximately equal to 14.5 psi. Introduction to Tire Pressure: Tire pressure refers to the air pressure inside the tire, which is essentially the 'blood pressure' of a car. The level of tire pressure plays a crucial role in the performance and power of the vehicle. According to the international standard GBT2978-2008, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar. Hazards of Overinflated or Underinflated Tires: For tires, pressure should not be too high or too low. Overinflated tires reduce the contact area with the ground, leading to poor grip, which affects the car's handling and driving stability. Underinflated tires can cause wave-like deformation during high-speed driving, which not only shortens the tire's lifespan but also increases the risk of a blowout.
13
1
Share

What are the inconveniences of having an out-of-town license plate?

Inconveniences of having an out-of-town license plate include issues with missing license plates and annual inspections. Below are the specific details: Missing License Plates: If your vehicle registration or license plate is lost, you can only apply for a replacement at the vehicle's registered location. Annual Inspection: Although policies support annual inspections in different locations, the procedures, required documents, and rules vary from place to place. Traffic Restrictions: Large cities with high populations often impose travel restrictions on vehicles with out-of-town license plates.
19
2
Share

What are the reasons for the X-Trail key ID error preventing startup?

X-Trail key ID error preventing startup reasons are: 1. The vehicle key battery is dead; 2. Insufficient battery power; 3. The vehicle's anti-theft system cannot properly detect the remote key chip. Taking the 2021 Nissan X-Trail as an example, it belongs to the compact SUV category, with body dimensions of: length 4675mm, width 1820mm, height 1722mm, wheelbase 2706mm, fuel tank capacity 65L, and curb weight 1514kg. The 2021 Nissan X-Trail features MacPherson strut front suspension and multi-link rear suspension, equipped with a 2.0L naturally aspirated engine producing maximum power of 151PS (111kW) and peak torque of 194Nm, mated to a 7-speed continuously variable transmission.
12
5
Share

What is the method for using car antifreeze?

The method for using car antifreeze is: 1. Use the same brand of antifreeze; 2. Avoid mixing with water. The steps for replacing antifreeze are: 1. Open the vehicle's engine hood, and the antifreeze reservoir can be seen in the upper right corner; 2. Open the antifreeze plug under the radiator to drain the old antifreeze; 3. Add new antifreeze, tighten the cap, and the antifreeze replacement is complete. The functions of antifreeze are: 1. To provide anti-corrosion protection for the engine's cooling system; 2. To prevent water from boiling when the engine temperature reaches 100 degrees Celsius; 3. To prevent scale formation and avoid reducing the radiator's cooling effect; 4. To ensure the engine operates normally under low temperatures.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.