Can a car with modified body kit be transferred?

Can the Subject 1 Test Be Taken on Weekends?

Whether the Subject 1 test can be taken on weekends depends on the arrangements of the local vehicle management office. Some cities schedule tests on holidays to make it more convenient for working individuals. Subject 1 Test Content: Basic knowledge of motor vehicles; laws, regulations, and road traffic signals; safe driving and civilized driving basics; fundamental knowledge related to motor vehicle driving operations. Subject 1 Passing Score: The total duration of the Subject 1 test is 45 minutes. The test consists of 100 questions, including true/false and multiple-choice questions, with a full score of 100 points. A score of 90 or above is required to pass. The test papers are randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Standards." Subject 1 Test Attempts: There is no limit to the number of attempts for the Subject 1 test. Each test session provides two opportunities. If both attempts are unsuccessful, the test must be rescheduled.

117

Share

Is there a traffic restriction on highways?

Highways do not have traffic restrictions, but there are several points to note when driving on them: Control your speed: Highways have strict speed limits. According to national regulations, the maximum speed on highways should not exceed 120 kilometers per hour, and the minimum speed should not be lower than 60 kilometers per hour. Driving too fast increases the likelihood of traffic accidents, while driving too slow can obstruct following vehicles and reduce the efficiency of the highway. Maintain a safe distance: The following vehicle must keep a sufficient distance from the vehicle in front in the same lane to allow for valuable reaction time in case of emergencies. Visibility is lower at night, so additional distance should be maintained. Stay in your lane: Drivers should always pay attention to roadside and road markings. It is not allowed to straddle or drive on lane dividers, nor is it permitted to occupy the overtaking lane for an extended period.

109

Share

How long after car ozone disinfection can you enter?

You can sit in the car 30 to 60 minutes after ozone disinfection. Below is an introduction to vehicle disinfection and maintenance: Interior disinfection: For water-soaked vehicles, if not thoroughly dried, they can easily become moldy, producing a very unpleasant odor. During the drying process, special attention should be paid to detailed areas, such as the inside of seats and sound insulation layers. Therefore, not only should the interior be inspected and cleaned, but comprehensive disinfection should also be carried out to prevent bacterial growth. Regular polishing: After a period of driving, the car's surface should be polished and waxed. When waxing, it's best to use waxing tools. If not available, a soft cloth can be used instead, and waxing should be avoided under direct sunlight. Additionally, pay attention to cleaning plastic parts. For painted plastic parts, use a cleaning agent, and avoid applying wax too heavily to prevent penetrating the paint and revealing the base color.

117

Share

Is Tire Pressure Monitoring Accurate?

Tire pressure monitoring is accurate because it automatically monitors tire pressure in real-time while the vehicle is in motion and alerts the driver to tire leaks or low pressure to ensure driving safety. There are three commonly used methods of tire pressure monitoring: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the data for each tire's pressure. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the differences in rotation speeds between tires, the system monitors tire pressure. Indirect tire pressure alert systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Tire Pressure Monitoring System (TPMS) Introduction: This system combines the advantages of both the above systems. It equips direct sensors in two diagonally opposite tires and includes a 4-wheel indirect system. Compared to using only a direct system, this hybrid system can reduce costs and overcome the limitation of indirect systems, which cannot detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time data on the actual pressure in all four tires as effectively as a direct system.

103

Share

Can you drive on the highway with a tire pressure of 192 kPa?

Driving on the highway with a tire pressure of 192 kPa is very dangerous. When the tire pressure is 192 kPa, it is not safe to drive at high speeds. Continuous driving can cause the steering wheel to feel heavy and lead to vehicle drifting, as well as increased fuel consumption. Moreover, continuing to drive with a tire pressure of 192 kPa will accelerate tire wear and shorten its lifespan. Additionally, driving at high speeds with such low tire pressure significantly increases the risk of a tire blowout. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Heavy steering wheel and vehicle drifting, which are factors detrimental to driving safety; Excessive movement of tire components, causing abnormal heat due to over-compression; Reduced functionality of the tire's cords and rubber, leading to delamination or cord breakage, as well as excessive friction with the rim, resulting in damage and abnormal wear at the bead area; Exponentially increased friction between the tire and the ground, causing a sharp rise in tire temperature, softening of the tire, and a drastic drop in strength. High-speed driving under these conditions may lead to a tire blowout; Increased deformation of the tire body, making the sidewalls prone to cracking, along with flexing movements that generate excessive heat, accelerating rubber aging, fatigue of the cord layers, and cord breakage. It also increases the tire's contact area with the ground, accelerating wear at the tire shoulders.

113

Share

What Does Vehicle Overall Dimension Include?

Vehicle overall dimensions include the length, width, and height of the vehicle. A longer body means greater longitudinal usable space, with more generous legroom in both front and rear rows, ensuring passengers won't feel cramped. Here is relevant information about the length, width, and height of vehicle overall dimensions: 1. Vehicle Length: Vehicle length is the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetrical plane, touching the foremost and rearmost protruding parts of the vehicle. 2. Vehicle Width: Vehicle width is the distance between two planes parallel to the vehicle's longitudinal symmetrical plane, touching the fixed protruding parts on both sides of the vehicle.

101

Share

Can a car with modified body kit be transferred?

Can the Subject 1 Test Be Taken on Weekends?

Is there a traffic restriction on highways?

How long after car ozone disinfection can you enter?

Is Tire Pressure Monitoring Accurate?

Can you drive on the highway with a tire pressure of 192 kPa?

What Does Vehicle Overall Dimension Include?

What are the precautions for driving downhill?

What are the consequences of failing to inspect a vehicle during the exemption period?

Is Car Window Tinting Illegal?

What is the appropriate temperature for car heating in winter?