Can a car tire with cracks continue to be used?

1 Answers
DelRuth
07/29/25 9:07pm
Car tires with cracks should not continue to be used. The maintenance methods for tires are: 1. Regularly clean the stones in the tire treads; 2. Reduce exposure to sunlight; 3. Promptly check the tire pressure; 4. Pay attention to the maintenance of the suspension; 5. Regularly inspect the front wheel alignment; 6. Be mindful of driving habits. The functions of tires are: 1. Support the entire weight of the vehicle and bear the load of the car; 2. Transmit traction and braking torque, ensuring the adhesion between the wheels and the road surface; 3. Reduce and absorb vibrations and impacts during driving, preventing severe vibrations and early damage to car components; 4. Adapt to the high-speed performance of the vehicle and reduce driving noise, ensuring driving safety, handling stability, comfort, and fuel efficiency.
Was this review help?
4
0
Share
More Forum Discussions

Why does the engine warning light come on in a Mercedes-Benz E300?

Sensor malfunctions, car maintenance issues, fuel quality problems, poor combustion of the air-fuel mixture, engine intake issues, turbocharging problems, exhaust system faults, and anti-theft system malfunctions are the main reasons that can trigger the engine warning light in a vehicle. Additionally, during startup, the vehicle performs a self-check on the engine system. Normally, the engine warning light should turn off after the self-check is completed. If it remains on for an extended period, it is advisable to visit a repair station promptly for professional assistance to diagnose and eliminate potential safety hazards. The following provides a detailed explanation of each type of fault: Sensor issues: Sensors include those for coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, leading to the illumination of the engine warning light. In such cases, it is essential to seek professional inspection at a service center to promptly address safety risks. Maintenance issues: Poor engine maintenance is one of the most common causes of the engine warning light. Vehicles have specific maintenance schedules. Failure to adhere to these schedules, combined with poor driving habits, can increase the burden on the engine, eventually triggering the warning light to alert the owner of a potential issue. Fuel quality issues: This refers to both fuel and engine oil. The fuel used in cars typically has a specific octane rating, while engine oil can be semi-synthetic or fully synthetic. Manufacturers usually recommend the appropriate fuel octane rating and type of engine oil. If the owner fails to follow these recommendations over time, it can lead to engine wear and trigger the warning light. Always use the recommended fuel octane and appropriate engine oil for the vehicle. Poor combustion of the air-fuel mixture: Faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can cause poor combustion of the air-fuel mixture in the engine. This can lead to carbon buildup or engine knocking, which the oxygen sensor detects and reports to the ECU, resulting in the warning light illuminating as a warning. Intake issues: The engine requires air for combustion, making the air filter crucial. A dirty or uncleaned air filter can affect the engine's air intake, potentially leading to blockages over time. In severe cases, this can cause the engine warning light to come on. Turbocharging issues: Problems with the intake boost pipes or turbocharger can also trigger the engine warning light. The most common issue is a damaged turbocharger, often accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Exhaust issues: Faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings can cause the engine warning light to illuminate. The most frequent issue is a malfunctioning catalytic converter, which can result from using leaded gasoline, lead- or silicon-based oil additives, physical damage to the catalytic converter, or fuel system faults. Anti-theft system: If the car's electronic anti-theft system malfunctions or the anti-theft controller is incompatible with the engine's electronic controller, the anti-theft system can prevent the engine from operating correctly, also causing the warning light to come on. Solutions for when the engine warning light comes on: If the engine warning light is on and the car cannot start, this may be due to a faulty fuel pump or ignition components. It is recommended to call for assistance immediately. If the engine warning light is on and the vehicle can still be driven but exhibits severe shaking or loss of power, pull over safely and call for roadside assistance. If the engine warning light is on but there are no noticeable driving issues, it may indicate a faulty sensor. In this case, you can continue driving cautiously at low to moderate speeds but should visit a repair shop as soon as possible to address the issue.
10
0
Share

Is the Wrangler a body-on-frame vehicle?

The Wrangler is a body-on-frame vehicle. The Wrangler is an off-road vehicle under the Jeep brand, featuring multi-link solid axle suspensions at both front and rear. Taking the all-new Wrangler as an example: its body dimensions are 4751mm in length, 1877mm in width, and 1840mm in height, with a wheelbase of 3008mm, front track of 1598mm, rear track of 1598mm, minimum ground clearance of 251mm, and a turbocharged intake system. The all-new Wrangler's interior is equipped with a three-spoke multifunction steering wheel, a large central control screen on the dashboard, and adopts the fourth-generation dual LCD human-machine interaction system.
14
4
Share

What is the top speed of the Wrangler?

The top speed of the Wrangler is approximately 180 kilometers per hour. It is a mid-size SUV under the Jeep brand. Taking the 2021 2.0T Sahara two-door version as an example: its exterior dimensions are 4334 mm in length, 1894 mm in width, and 1839 mm in height, with a wheelbase of 2459 mm, a minimum ground clearance of 251 mm, and a fuel tank capacity of 70 liters. The 2021 2.0T Sahara two-door version is equipped with a 2.0L inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 266 hp, a maximum power of 195.4 kW at 5000 rpm, and a maximum torque of 400 Nm at 3000 rpm.
10
1
Share

Which lane should motorcycles use when riding?

Motorcycles should ride in the rightmost motor vehicle lane. According to the implementation regulations of the Road Traffic Safety Law, on roads with two or more motor vehicle lanes in the same direction, the left lane is designated as the fast lane, while the right lane is the slow lane. Motor vehicles traveling in the fast lane must maintain the speed specified for that lane. If a vehicle cannot reach the designated speed of the fast lane, it should move to the slow lane. Therefore, motorcycles should ride in the rightmost lane. If there are traffic signs indicating speed limits, vehicles must adhere to the posted speeds. When a vehicle in the slow lane needs to overtake the vehicle in front, it may temporarily use the fast lane. On roads with two or more motor vehicle lanes in the same direction, changing lanes must not affect the normal movement of other vehicles in the adjacent lanes.
5
5
Share

Do you need a driver's license for a motorcycle?

Motorcycles require a driver's license because they are classified as motor vehicles. According to the relevant regulations on the terminology and definitions of motor vehicle types, a motor vehicle refers to a wheeled vehicle driven or towed by a power device, used for carrying passengers, transporting goods, or performing specialized engineering operations on the road. This includes cars and car trains, motorcycles, wheeled special-purpose machinery, trailers, trams, etc. A driver's license is a legal document required for driving motor vehicles. It is a legal credential issued by the administrative authorities after the applicant has learned and mastered traffic regulations and driving skills, and passed the required tests, permitting them to drive a specific type of motor vehicle.
6
0
Share

How to Check the Fuel Level of a Motorcycle?

Methods to check the fuel level of a motorcycle: Reset the odometer after each refueling and record how much fuel was used over how many kilometers, or download a fuel consumption calculation app to compute the fuel consumption through the software. Calculating the fuel consumption of a motorcycle is the same as calculating that of a car—divide the amount of fuel used by the distance traveled in kilometers and multiply by 100 to get the fuel consumption per 100 kilometers. Tips for saving fuel on a motorcycle: 1. Start gently and release the clutch slowly; 2. Shift gears in a timely manner—neither too early nor too late—always refer to the tachometer when shifting; 3. High throttle or low engine RPM can lead to increased fuel consumption; 4. Regularly check tire pressure, as proper tire pressure ensures normal fuel consumption for the motorcycle.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.