Can a car still be inspected if it hasn't undergone annual inspection for two years?

What does four-wheel nitrogen mean?

Four-wheel nitrogen refers to replacing the ordinary gas in all four tires of a car with nitrogen. Nitrogen is chemically very inert; it only reacts with hydrogen to form ammonia under high temperature, high pressure, and catalytic conditions. It combines with oxygen to form nitric oxide only under electric discharge. Even reactive metals like Ca, Mg, Sr, and Ba react with nitrogen only when heated. Below are the benefits of filling tires with nitrogen: 1. Reduced probability of tire blowouts: Compared to filling tires with ordinary air, high-purity nitrogen, being oxygen-free, moisture-free, and oil-free, has a much lower thermal expansion coefficient. This effectively slows down the heat buildup in tires, significantly enhancing tire safety and thereby reducing the occurrence of blowouts. 2. Lower driving noise: Nitrogen is a diatomic gas with inert chemical properties and very low audio conductivity, only about 1/5 that of ordinary air. Thus, using nitrogen can effectively reduce tire noise during driving, noticeably improving driving quietness. 3. Extended tire lifespan: After using nitrogen, tire pressure becomes more stable, and the volume change of the gas inside the tire is minimized. This greatly reduces irregular tire wear, effectively extending the tire's service life.

4

Share

What to Do in Case of a Tire Blowout on the Highway?

The following are the steps to handle a tire blowout while driving at high speed: 1. If the front tire bursts, do not step on the brake under any circumstances. 2. Hold the steering wheel firmly with both hands, try to control the direction of movement, and release the accelerator to let the car slow down gradually. 3. Once the speed has completely decreased, steer the car to a safe spot by the roadside, change the tire, and proceed. Here are some methods to prevent tire blowouts: 1. Regularly maintain your tires, frequently checking for punctures, scratches, or bulges caused by broken cords. When the car is lifted (e.g., during chassis inspection or oil changes), take the opportunity to inspect the inner side of the tires for any issues. If problems are found, consult a repair shop or 4S store promptly. Rotate the tires as required to ensure even wear. 2. Pay attention to the lifespan of your tires. Determine whether to replace them based on the mileage, road conditions, and wear. Generally, tires used on city roads can last longer, but if you frequently drive on highways or rough roads, replace them in time based on the degree of wear. 3. Develop the habit of checking tire pressure. Regularly inspect the tire pressure and measure it at least once a month, topping it up as needed. Always check the tire pressure before driving on the highway to ensure it is within the normal range. 4. Prevent the tires from overheating during high-speed driving. Avoid driving continuously for too long on the highway; instead, take breaks at rest areas to allow the tires to cool down. This is especially important in summer. 5. Cultivate good driving habits and control your speed. Avoid sudden starts, hard braking, and fast turns, as these actions can increase tire wear and instant pressure. Do not run over hard objects on the road, and always maintain a controlled speed.

16

3

Share

What is Automotive Door Hinge Grease?

It is a high-performance automotive assembly grease formulated with synthetic hydrocarbons exhibiting excellent low-temperature properties as the base oil, lithium soap as the thickener, and enhanced with multiple additives including antioxidants, rust inhibitors, and anti-corrosion agents. Below are its key characteristics: 1. Application: Designed for long-term lubrication of plastic/plastic and plastic/metal friction components in automotive applications, suitable for medium to high-speed movements under moderate loads. 2. Advantages: Exceptional low-temperature resistance meets automotive component requirements in cold environments; superior adhesiveness, anti-wear properties, and lubricity ensure long-term noise reduction during operation; excellent water resistance and corrosion protection with good compatibility to most plastics and elastomers.

10

1

Share

Why won't the Audi cigarette lighter pop out?

Audi cigarette lighter not popping out can be caused by two reasons: 1. If the lighter glows red but still functions normally, it indicates the spring clip in the socket is damaged. 2. If the lighter doesn't glow red and simply won't pop out, it may be due to a blown fuse causing power failure to the lighter. Below is relevant information about cigarette lighters: 1. The cigarette lighter is a standard component in all vehicles, serving as a convenient ignition source for smoking drivers. Essentially, it's a device designed for lighting cigarettes. 2. Some manufacturers produce lighters that aren't actually for lighting cigarettes, but rather serve as power outlets - these are commonly referred to as cigar lighter sockets.

7

4

Share

Why does the lock light not illuminate but the unlock light works?

The reasons why the lock light does not illuminate but the unlock light works: 1. The engine hood, doors, or trunk are not properly closed; 2. Open the engine compartment cover and check if the rubber pads near the upper edge of both headlights are still present. There is a sensor below the corresponding rubber pad, and the rubber pad must press on the sensor for normal operation. The car remote locking system mainly consists of two parts: the transmitter and the receiver: 1. Transmitter: Composed of a transmission switch, transmission antenna (keyboard), integrated circuit, etc. It contains an identification code storage circuit and an amplitude modulation circuit, with a button-type lithium battery on the opposite side of the circuit. The transmission frequency is selected according to the radio standards of the country of use, and the transmission switch sends a signal each time it is pressed. 2. Receiver: After the transmitter sends the identification code via shortwave modulation, it is received by the car's shortwave antenna and enters the shortwave high-frequency amplification processor of the receiver's electronic control unit through a distributor for demodulation. The demodulated identification code is then compared; if it is the correct code, it is input into the control circuit to activate the actuator.

12

2

Share

What is the Odyssey?

Odyssey is a mid-size MPV model. It was introduced by the Japanese automaker Honda and is produced in China through a joint venture with GAC Group, known as GAC Honda Odyssey. The model's advantage lies in its excellent second-row space, and it comes with a hybrid version across the lineup, offering better fuel efficiency. Here are some additional details: 1. The Odyssey is equipped with a 2.0-liter, 146-horsepower four-cylinder naturally aspirated engine, paired with a front-mounted electric motor and lithium-ion battery. The total power output of the electric motor is 135 kW, with a total torque of 315 Nm. 2. The gasoline engine has a maximum power output of 107 kW and a maximum torque of 175 Nm. It is paired with an electronic continuously variable transmission (e-CVT), providing better smoothness and fuel efficiency.

20

0

Share

Can a car still be inspected if it hasn't undergone annual inspection for two years?

What does four-wheel nitrogen mean?

What to Do in Case of a Tire Blowout on the Highway?

What is Automotive Door Hinge Grease?

Why won't the Audi cigarette lighter pop out?

Why does the lock light not illuminate but the unlock light works?

What is the Odyssey?

Where are Saitoo tires produced?

Why does the Accord shake when idling with the air conditioning on?

What Causes Abnormal Audi Engine Oil Level?

What kind of memory card should I buy for a dash cam?