Can a car still be driven after falling into water?

1 Answers
KevinRose
07/30/25 6:32am
If a vehicle has been submerged in water, it is recommended not to drive or use it. It must be inspected and repaired before use. Depending on the duration of submersion, the following scenarios can occur: 1. Submersion during vehicle use: Depending on the extent of submersion, if water has entered the cabin or reached a high level inside the vehicle, do not attempt to enter or move the vehicle. It should be towed to a repair facility as soon as possible for inspection and repair; 2. Submersion while driving: If the vehicle stalls while driving through water or immediately after submersion, do not attempt to restart or drive it. Contact a repair facility immediately. This usually happens because water has entered the engine through the intake system, potentially reaching the combustion chamber, causing the stall. Continuing to drive or restarting the engine could lead to severe damage; 3. Previously submerged vehicles: Even after repairs, if potential hazards have not been fully addressed, continued use carries significant risks. Severe consequences may include vehicle self-ignition, damage to the engine, transmission, airbags, and other critical components.
Was this review help?
18
3
Share
More Forum Discussions

Why Won't the Honda Fit Lock Cylinder Turn?

Honda Fit lock cylinder may not turn due to rust inside the lock cylinder or damage to a certain component. Below is an introduction to the related content of Honda XRV: 1. Power: The Honda XRV is equipped with a 1.5T turbocharged engine that meets the National VI emission standard, with a maximum power of 177 horsepower. The transmission system continues to match with a 6-speed manual and CVT gearbox. 2. Design: The rear bumper of the Honda XRV is decorated with chrome trim, enhancing the sense of refinement; in terms of the exhaust system, the new car will provide either dual exhaust pipes or single exhaust pipe depending on the model. The interior design of the Honda XRV continues the current design style, with a simple center console shape and a reasonable layout of functional areas.
1
4
Share

How Often Should the Factory Spark Plugs Be Replaced on the 10th-Generation Civic?

The factory spark plugs for the 10th-generation Civic should be replaced every 100,000 kilometers. The standard for the factory spark plugs in the 10th-generation Civic is typically characterized by the heat range, which represents the thermal characteristics of the spark plug. The heat range indicates the balance between heat absorption and dissipation in the insulator nose of the spark plug. A higher heat range signifies a stronger balance between heat absorption and dissipation. Hot-type spark plugs have a lower heat range, while cold-type spark plugs have a higher heat range. Spark plugs are a crucial part of the engine's ignition system, primarily responsible for introducing the high voltage from the ignition coil into the engine cylinder, generating a spark across the electrode gap to ignite the air-fuel mixture inside the engine, thereby providing power to the vehicle.
10
5
Share

How to check the tire pressure monitoring system in the 2020 Outlander?

The Outlander is equipped with a tire pressure warning system that automatically alerts the driver when the tire pressure is too high or too low. Here is some relevant information: 1. Structure and principle of the tire pressure monitoring system: The central processing unit sends low-frequency commands via an antenna to activate the tire pressure sensors. Once awakened, the tire pressure sensors transmit high-frequency signals containing their own identifiers back to the central processing unit via the antenna. 2. Direct tire pressure monitoring system: The direct tire pressure monitoring system uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is then transmitted wirelessly from inside the tire to a central receiver module, which displays the tire pressure data for each tire. The system will automatically issue a warning if the tire pressure is too low or if there is a leak.
8
4
Share

Why Does the Valve Cover Gasket Keep Leaking Oil After Replacement?

The reasons for continued oil leakage after replacing the valve cover gasket include the following: 1. The crankcase forced ventilation valve is blocked, causing increased crankcase pressure, which then releases through the valve cover gasket or other weak points, resulting in oil leakage. 2. The valve cover gasket has aged, leading to poor sealing. 3. If the crankcase ventilation valve is clogged, or if the piston rings and cylinder wall gaps are too large, causing excessive blow-by gas, the high crankcase pressure will force gas to escape through weak sealing points, such as the valve cover gasket or front/rear crankshaft oil seals, resulting in engine oil leakage.
12
2
Share

What causes the automatic headlight malfunction in the Audi A3?

Audi A3 automatic headlight malfunction is caused by interference from strong searchlights on the road at night affecting the light sensor of the automatic headlights. Below is an introduction to related aspects of the Audi A3: 1. Development Platform: The Audi A3 is developed based on the Volkswagen MQB platform. 2. Body Design: The body features lightweight design and aluminum materials. 3. Powertrain: It is equipped with multiple engines including 1.4TFSI and 1.8TFSI. The front suspension of the Audi A3 chassis is MacPherson strut type, and the rear axle adopts a torsion and crank-type structure with separately arranged springs and shock absorbers.
16
1
Share

Does the Haval H4 have four-wheel drive?

Haval H4 does not have four-wheel drive. The Haval H4 engine models are divided into GW4B15 and GW4B13, equipped with two powertrain systems: a 1.3T and a 1.5T turbocharged engine. The 1.3T engine has a maximum output power of 139 horsepower, while the 1.5T engine has a maximum output power of 169 horsepower, paired with a 7-speed wet dual-clutch transmission. The maximum power is 110 kW, and the maximum torque is 210 Nm. The Haval H4 body dimensions are 4420mm in length, 1845mm in width, and 1695mm in height, with a wheelbase of 2660mm.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.