Can a car's annual inspection be done three months in advance?

1 Answers
DelJohn
07/30/25 2:55am
Small cars can undergo annual inspection three months in advance. Annual Inspection: Annual inspection, also known as annual check, is a more colloquial term. It refers to the annual or biennial safety inspection of a vehicle, which includes a comprehensive check of components such as the horn, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, and license plate installation. Points to Note for Annual Inspection: Before applying, the vehicle owner must resolve all traffic violations and accidents related to the vehicle. When applying, the owner must fill out an application form and submit the vehicle's registration certificate, compulsory traffic accident liability insurance certificate, vehicle and vessel tax payment or exemption proof, and the vehicle safety technical inspection certificate. Small cars can undergo annual inspection three months in advance.
Was this review help?
13
0
Share
More Forum Discussions

What is the range of the BYD Han EV?

BYD Han 2021 EV Standard Range Luxury Edition has an NEDC pure electric range (km) of 506 km, with a battery energy of 64.8 kWh. The factors affecting the range of electric vehicles are as follows: Temperature: In cold weather, at freezing temperatures, electric vehicles can lose 25% of their rated range, and fast charging efficiency will be reduced by 35%. Heating and cooling: Air conditioning heating can reduce range by about 41%, while cooling reduces it by approximately 7%. Stop-and-go driving: Electric vehicles have a regenerative function that can instantly turn their motors into generators to charge the battery and decelerate the car. This is due to the electromagnetic resistance required for the regenerative process. To maximize this, set the car to the highest kinetic energy recovery mode and lift off the accelerator as much as possible during braking. The effect of kinetic energy recovery can be observed through changes in the range displayed on the dashboard. Battery capacity: The battery of an electric vehicle gradually loses capacity over time.
12
0
Share

Is it necessary to apply a protective film on the car's front windshield?

It is necessary to apply a protective film on the car's front windshield. Without protection, the windshield can be exposed to outdoor ultraviolet rays and visible light. The functions of the film include: 1. Heat insulation and sun protection to reduce the interior temperature; 2. Blocking UV rays to slow down the aging of car interiors; 3. Preventing injuries to drivers and passengers in case of accidental glass breakage; 4. Creating a private space; 5. Reducing air conditioning consumption; 6. Enhancing aesthetics; 7. Reducing glare. Post-installation precautions include: 1. Avoid rolling down windows within 3 days; 2. Do not clean the heat-insulating film or activate the defogging heating wires within a week; 3. Avoid using nails or sharp objects to lift the edges of the film to prevent dirt from entering; 4. Refrain from attaching suction cup items to the film for 1 to 2 weeks; 5. Seek professional assistance immediately for any bubbles, displacement, or blurred vision on the film to ensure driving safety.
14
5
Share

What is the Safe Following Distance Between Vehicles?

The following are the specific details regarding safe following distances between vehicles: 1. High-speed driving: When the speed is above 100km/h, the safe following distance should be more than 100 meters. 2. Fast driving: When the speed is above 60km/h, the safe following distance in meters should be equal to the speed in km/h; for example, at 80km/h, the safe following distance is 80 meters. 3. Medium-speed driving: When the speed is around 50km/h, the safe following distance should not be less than 50 meters. 4. Low-speed driving: When the speed is below 40km/h, the safe following distance should not be less than 30 meters. 5. Very slow driving: When the speed is below 20km/h, the safe following distance should not be less than 10 meters.
12
4
Share

How to Manually Reset the Maintenance Light on a Mistra?

Here is the method to manually reset the maintenance light on a Mistra: 1. Press the one-touch start button to start the vehicle; 2. Press the driver information center control button on the right side of the steering wheel to bring up the maintenance menu interface on the instrument panel display; 3. Select the reset option to set the maintenance mileage to zero; 4. Complete the reset. Here is some related information about the Mistra: 1. The Mistra is a new mid-to-high-end sedan from Beijing Hyundai. It measures 4710mm in length, 1820mm in width, and 1470mm in height, with a wheelbase of 2770mm, a fuel tank capacity of 62L, and leather seats. 2. In terms of configuration, the Mistra continues Beijing Hyundai's tradition of high-spec new cars, featuring automatic climate control, heated front seats, and a multimedia display located in the center of the dashboard.
6
2
Share

Is a Temporary Residence Permit Required for Taking the Driver's License Test in Zhengzhou?

No temporary residence permit is required for taking the driver's license test in Zhengzhou. Below are the specific regulations for obtaining a driver's license: 1. One-Certificate Nationwide Test: With a resident ID card, one can directly apply for a small car driver's license (Class C) in any city nationwide without submitting a residence permit or residence registration certificate, further facilitating the public to take the test and receive the license nearby and independently. For Hong Kong, Macao, and Taiwan residents working or living in mainland China, they can use their residence permits for Hong Kong, Macao, and Taiwan residents without submitting accommodation registration certificates or other proofs. 2. Cross-Region Subject Tests: Mainland residents with resident ID cards and Hong Kong, Macao, and Taiwan residents with their residence permits can directly apply to the local vehicle management office to change the test location. After changing the test location, they can directly schedule the remaining subject tests at their current residence, and the passed subject test scores remain valid. After passing all subject tests, the driver's license can be directly obtained at the current test location.
5
5
Share

What does the C5 oil standard mean?

Here is the relevant introduction to the C5 oil standard: 1. ACEA-C5 refers to the testing and certification standard for automotive lubricants set by the European automobile manufacturing industry. ACEA-C5 is the highest-grade oil in this series of standards, with correspondingly the best oil quality and performance, while C3 ranks third in the grade. 2. ACEA-C5 oil can also be used in high-performance gasoline and light-duty diesel engines equipped with diesel particulate filters (DPF) and three-way catalysts (TWC). Here are some precautions regarding oil usage: 1. For gasoline engines, SDSF-grade gasoline engine oil should be selected based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, CBCD-grade diesel engine oil should be chosen according to mechanical load. The selection standard should not be lower than the manufacturer's specified requirements. 2. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, causing various problems for the engine. To avoid malfunctions, oil should be changed regularly according to usage conditions, and the oil level should be kept moderate.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.