Can a car purchased in Hainan be driven to the mainland?

1 Answers
DelLaila
07/25/25 2:04am
It is possible to drive a car purchased in Hainan to the mainland. Here are some relevant details: 1. Duty-free car purchase: Buying a car duty-free in Hainan is cheaper, but the vehicle cannot be driven out of Hainan Island. If it is driven out, the taxes must be paid. 2. Conditions for driving to the mainland: As long as the car is within the validity period of its annual inspection, it can be driven nationwide. It is recommended to have an environmental green label, as many city centers now require it for entry. Vehicles can operate passenger and cargo transportation between Hainan Free Trade Port and the mainland, with a cumulative stay on the mainland not exceeding 120 days per calendar year. If the vehicle is traveling from Hainan Free Trade Port to the mainland for passenger or cargo transportation services, with fixed stops and routes, and returns immediately after loading or unloading passengers or cargo, there is no limit on the number of days.
Was this review help?
16
2
Share
More Forum Discussions

What are the new regulations for obtaining a driver's license after August 1st?

Below are the relevant new regulations regarding the driver's license test: 1. Relaxation of age restrictions: The new regulations have relaxed the age limit for small cars and small automatic transmission car driver's licenses, removing the upper age limit of 70 years old. Applicants aged 70 and above must undergo tests for memory, judgment, and reaction ability. 2. Lowering of the minimum age for applying for a driver's license: The minimum age for applying for large passenger vehicle and tractor driver's licenses has been adjusted from the original 26 and 24 years old to 22 years old. Legal basis: Article 19 of the 'Road Traffic Safety Law of the People's Republic of China' states that driving a motor vehicle requires obtaining a motor vehicle driver's license in accordance with the law. Applicants for a motor vehicle driver's license must meet the driving license conditions prescribed by the public security department of the State Council; after passing the examination, the traffic management department of the public security organ will issue the corresponding category of motor vehicle driver's license. Holders of foreign motor vehicle driver's licenses who meet the driving license conditions prescribed by the public security department of the State Council and pass the assessment by the traffic management department of the public security organ may be issued a Chinese motor vehicle driver's license.
8
4
Share

What is the model number of the oil filter for the Roewe RX5?

The Roewe RX5-1.5T is equipped with SAIC's second-generation SGE series engine. The 20T oil filter is an integrated metal-shell oil filter. The Roewe RX5-2.0T features SAIC's second-generation NLE series engine. The 30T model uses a split-type design, allowing for the replacement of just the filter paper during maintenance. Below is additional information: 1. Functionality: The Roewe RX5 comes with a Tire Pressure Monitoring System (TPMS), which is controlled by the ABS and continuously monitors the speed of each wheel. Under normal driving conditions without brake pedal application, if the ABS detects a discrepancy in the rotational speed of one or more wheels compared to the others, the system calculates the tire pressure change based on the speed difference. When the change exceeds the preset range, the system triggers an alarm, illuminating the TPMS warning light (yellow) on the instrument panel. 2. Exterior Design: The Roewe RX5 adopts the 'Rhythm Design' language, featuring matrix LED headlights composed of 24 LED light sources. The body lines are stylish and dynamic, with a dual-waistline design on the side profile. The roof is equipped with a luggage rack, and the overall vehicle lines are rhythmic and full of tension.
4
0
Share

Does the ACC warning light affect normal driving?

It's best not to drive. Below are the related reasons for ACC malfunction: 1. Light is on, but driver experiences no abnormalities: There are two scenarios when the warning light comes on. First, although the light is on, there are no unusual sensations while driving, with acceleration and braking functioning normally. In this case, the vehicle can still be driven normally. This might be due to a temporary sensor malfunction that has since resolved, interference from certain external conditions, or a fault that doesn't affect driving performance but may slightly impact emissions. In such situations, you can continue driving temporarily but should visit a repair shop for inspection as soon as possible. 2. Light is on with abnormal driving sensations: Second, when the warning light comes on accompanied by noticeable abnormalities such as severe shaking or weak acceleration, it's strongly advised not to continue driving. Call for roadside assistance or a tow truck instead. If the repair shop is very nearby, you may cautiously drive there. Since these symptoms indicate a serious malfunction, continued driving could worsen the problem, allow damage to accumulate, or even trigger additional failures. Therefore, continuing to drive is not recommended.
6
2
Share

Should You Depress the Clutch During Curve Driving?

When driving through curves, you should half-depress the clutch to control the vehicle speed. Here are some techniques for curve driving: 1. Approaching the Test Area: When the in-car voice prompt begins, drive the vehicle to the entrance of the curve, adjusting it to the center of the road. Try to keep the outer front wheel close to the right edge of the curve. 2. Entering the Curve Zone: Drive the vehicle along the right side. When the left front corner aligns with the right edge line, turn the steering wheel one full turn to the left while making minor adjustments. Pay attention to the distance between the wheel and the curve edge in the right rearview mirror. 3. Completing the Right Edge Line: Keep the steering wheel steady until the right vertex of the hood touches the left edge line of the right turn, then straighten the wheel and proceed slowly. When the left 1/3 of the hood touches the left edge line, turn the wheel one full turn to the right while making minor adjustments to align the right front corner with the left edge line of the right turn. Follow the S-curve to the right to avoid crossing or leaving the line. 4. Exiting the S-Curve: When the hood is aligned with the exit, quickly straighten the wheel and continue driving out of the curve driving test area.
2
0
Share

Difference Between Reiz Electronic Shock Absorbers and Conventional Shock Absorbers?

The most significant differences lie in the damping fluid and electromagnetic coil. The viscosity of the damping fluid in electronic shock absorbers can be adjusted in real-time according to road conditions, whereas in hydraulic shock absorbers, the viscosity of the damping fluid is fixed after sealing. Below are the relevant explanations: 1. Working principle of electro-rheological shock absorbers: The working principle of electro-rheological shock absorbers, abbreviated as CVSA valve, involves a continuously variable servo valve. Its input comes from the current supplied by the suspension control module; under normal operating conditions, this current ranges between 0.3A (soft damping) and 1.6A (hard damping) to provide the internal coil with the output current, achieving the desired working pressure inside the shock absorber cylinder. 2. Working principle of magneto-rheological shock absorbers: Magneto-rheological shock absorbers utilize electromagnetic reactions to make real-time responses to road conditions and driving environments based on input information from sensors monitoring body and wheel movements.
6
2
Share

What engine does SAIC MG use?

MG is equipped with the 'Blue Core' SGE20T engine, jointly developed by SAIC Group and General Motors. This 1.5-liter turbocharged engine delivers a maximum power of 169 horsepower and a peak torque of 250 Nm. More information about MG engines is as follows: 1. MG Powertrain: MG engines are divided into two models, one is a 1.0T in-cylinder direct injection turbocharged engine, and the other is a 1.5L naturally aspirated engine with a maximum horsepower of 120 and a peak torque of 150 Nm. 2. Features of the Blue Core Series Engine: MG's 1.0T is one of SAIC's Blue Core series engines, with main technical features including in-cylinder direct injection system, dual variable valve timing, variable oil pump, water-cooled exhaust manifold, all-aluminum cylinder block, etc.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.