Can a car be blown away by strong wind if the handbrake is not engaged?

How to Break in a New Manual Transmission Car?

The following are the methods for breaking in a new manual transmission car: 1. Avoid excessively high engine RPM. The break-in period is a process of smoothing and aligning the engine components. Excessively high RPM can damage the uneven surfaces of the crankshaft and bearings, so it’s important to monitor the engine RPM. Regardless of the gear, the RPM should generally not exceed 3,000, or 3,500 for automatic transmissions. 2. Avoid staying in one gear for too long. Some owners, in an attempt to speed up the break-in process, often drive in fifth or fourth gear, but this can lead to rapid engine aging. The correct approach is to use all gears appropriately and drive under various road conditions. 3. Avoid prolonged driving in low gears. During the break-in period, it’s best not to drive for extended periods in first or second gear. Prolonged use of low gears can damage the transmission. Instead, alternate between high and low gears for proper break-in. 4. Avoid overloading the car. The lighter the load during the break-in period, the better, as excessive weight can strain the engine. Also, avoid hauling heavy items. 5. Don’t perform the first maintenance too early. Some people prefer to service the car before the recommended first maintenance date, but this is not advisable. The recommended interval is scientifically calculated, so early maintenance is unnecessary. Generally, the first service should be done after 2,000 or 2,500 kilometers. 6. Avoid excessively long driving sessions. Don’t drive the new car continuously for long hours like a taxi. Limit driving to a few hours at a time and allow the car to rest. Avoid driving extensively on weekends or taking long trips, as this accelerates component wear and can severely harm the new car.

11

2

Share

Is the windshield film applied on the inside or outside?

The windshield film is applied on the inside. Disadvantages of applying windshield film on the outside: 1. If applied outside, exposure to wind and rain will reduce its service life by at least two-thirds; 2. If applied outside, glass fragments from external impacts can still injure people, failing to serve the purpose of a safety film. Where is car film applied: Car film refers to applying a thin film-like substance (also called solar film or safety/heat-insulating film) on the front and rear windshields, side windows, and sunroof of a vehicle. Functions of car film: The film primarily blocks ultraviolet rays, reduces heat transmission, and prevents injuries caused by sudden glass breakage, while also protecting personal privacy through the one-way visibility feature of solar films.

4

5

Share

Should the AUTO Air Conditioning Be Turned Off Before Shutting Down the Engine?

AUTO air conditioning should be turned off before shutting down the engine. Here is the relevant information: 1. Reason: After the air conditioning is turned on, moisture in the air will condense on the surface of the evaporator, making it damp and cold. Moreover, mold in the air will adhere to the surface, and over time, the evaporator surface becomes a breeding ground for bacteria, which multiply rapidly and produce foul-smelling metabolites and gases. This is why a sour smell is emitted when the air conditioning is turned on. 2. A/C Indicator: There is an A/C indicator on the right, which stands for the compressor. In summer, cooling is required, so the compressor must be turned on, and it usually starts automatically. In winter, it can be left off, as hot air can be obtained once the car's water temperature rises. Not turning on the compressor in winter can also save fuel.

18

3

Share

How Long Does a Minor Maintenance Take?

Generally speaking, the car maintenance cycle is every 5,000 or 10,000 kilometers or every six months, depending on the effective time or mileage of the engine oil and oil filter used in the car. The validity periods of mineral oil, semi-synthetic oil, and fully synthetic oil of different brand grades are also different. Regular maintenance is divided into the following aspects: 1. Engine oil: Every 5,000-10,000 kilometers is the best replacement cycle. If the replacement cycle is too long, it will cause wear inside the engine. In addition, vehicles used less frequently should have their oil changed every six months, as the oil will deteriorate over time and can no longer protect the engine. 2. Oil filter: If the filter becomes dirty, even if the oil is changed, its effectiveness will be reduced. It is very effective to replace the oil filter at the same time as the oil. 3. Antifreeze: When traveling in cold regions, do not forget to increase the concentration of antifreeze. Generally, the antifreeze concentration is about 30%. To prevent freezing, an optimal guarantee of 40-50% is required.

12

3

Share

What Causes Abnormal Noises When Reversing a Car?

There are many reasons for abnormal noises when reversing a car, including tire damage, shock absorber issues, transmission problems, and brake pad issues. Below are detailed explanations: 1. Tire Damage: If the car tire has a bulge, it can cause noise when reversing or moving. The solution is simple—just repair or replace the tire. 2. Shock Absorber Issues: When the car's shock absorbers have problems, noise may also occur when turning or driving on bumpy roads. This situation requires replacing the shock absorbers at a repair shop or 4S store. 3. Transmission Problems: If the car's transmission has issues, such as damaged reverse gears, friction can cause noise. This requires opening the transmission to inspect and replace the gears. 4. Brake Pad Issues: Brake pad problems are a common cause of car noise, including improper installation, severe wear, or foreign objects stuck between the pads and calipers. The specific situation requires removing the tire to inspect the brake pads and then performing repairs or replacing the pads if necessary.

10

2

Share

What are the functions of the automatic transmission gears in the Haval Chitu?

Haval Chitu automatic transmission gear functions introduction: 1. D (Drive) Gear: This is the most frequently used gear. The D gear represents the forward driving gear, used for normal driving. Simply place the gear selector in the D position, and the car will automatically adjust gears while driving. During long downhill descents, because the D gear in automatic transmission cars does not have the engine braking function, it is not advisable to keep it in D gear, otherwise the speed will increase, leading to potential safety hazards. 2. P (Park) Gear: Used when parking. P means to move the gear selector to the P position when parking, locking the transmission's parking brake device to the output shaft. Tighten the hand brake, and the car will not move. 3. N (Neutral) Gear: This gear is rarely used, mainly during traffic light stops. N represents neutral, used when starting the car or towing. If waiting at a traffic light for a long time, it's best to shift into N gear and tighten the handbrake. However, coasting in N gear downhill is prohibited as it not only doesn't save fuel but also damages the transmission. 4. R (Reverse) Gear: R gear is the reverse gear, used when reversing. Do not shift into reverse gear before the car has completely stopped, otherwise, the transmission will wear out quickly. The car is equipped with a reverse camera, which will display on the central screen when R gear is engaged. 5. L (Low) Gear: Equivalent to 2nd gear, often used when going up or down hills. For example, when climbing a hill and the power is insufficient, shifting into L gear makes hill starts easier. In fact, shifting into L gear limits the car's automatic gear shifting to the lowest gear only. 6. S (Sport) Mode: Some models are equipped with an S gear. When the car is in S gear, it allows free gear shifting, but the shifting will be delayed. Therefore, the engine will maintain high RPM for a longer time, increasing fuel consumption, but also providing greater torque output, usually used when overtaking.

8

2

Share

Can a car be blown away by strong wind if the handbrake is not engaged?

How to Break in a New Manual Transmission Car?

Is the windshield film applied on the inside or outside?

Should the AUTO Air Conditioning Be Turned Off Before Shutting Down the Engine?

How Long Does a Minor Maintenance Take?

What Causes Abnormal Noises When Reversing a Car?

What are the functions of the automatic transmission gears in the Haval Chitu?

How Many Turns to Lock the Steering Wheel of a Large Vehicle?

How Many Times Are the First and Second Maintenance?

Is the Initial License Date the Date of Subject 4?

How to Unlock the Rear Air Conditioning in a Passat?